Upgrade. Add a modern appearance to your vehicle with these replacement LED bulbs. These bright LEDs are available in a number of colors including cool white, to replace the factory yellowish incandescent bulbs. Brightness. All Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. Reliability. Unlike other bulbs on the market, Diode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!Features 1156 XP80 LED Red Pair Direct replacement for factory incandescent bulb Increased output with LED Appearance Plug and play, simple installation Available in multiple brightness levels Specifications Operating Voltage: 9-16V Operating Temperature: No Connector(s): OEM-Size Plug and Play Fitment Bulb Size: 1156 Application: Rear Turn Signal Make: Mini Model: Clubman Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 Flasher Setup: BCM Controlled (resistor only) What's Included Quantity: Two (2) Warranty: 3 year warranty Return Policy: 30-day Return with no restocking fee 100 percent Satisfaction Guarantee

Upgrade. Add a modern appearance to your vehicle with these replacement LED bulbs. These bright LEDs are available in a number of colors including cool white, to replace the factory yellowish incandescent bulbs. Brightness. All Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. Reliability. Unlike other bulbs on the market, Diode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!Features 1156 XP80 LED Red Single Direct replacement for factory incandescent bulb Increased output with LED Appearance Plug and play, simple installation Available in multiple brightness levels Specifications Operating Voltage: 9-16V Operating Temperature: No Connector(s): OEM-Size Plug and Play Fitment Bulb Size: 1156 Application: Rear Turn Signal Make: Mini Model: Clubman Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 Flasher Setup: BCM Controlled (resistor only) What's Included Quantity: One (1) Warranty: 3 year warranty Return Policy: 30-day Return with no restocking fee 100 percent Satisfaction Guarantee

Upgrade. Add more light output and a modern appearance to your vehicle with the 1157 HP11. Populated with four side-firing 1.5W LED chips and one 5W LED chip with a projector lens on top, the HP11. Housed in an aluminum casing for maximum heatsinking properties, the HP11 will last for years to come. Best of all, installation only takes minutes - simply take out your factory bulb and the HP11 will fit snugly in the socket. Brightness. At 310 lumens, the HP11 will provide more total light output than your factory bulb. If you are looking for maximum light output, we'd recommend checking out our XP80 option! All Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. Reliability. Unlike other bulbs on the market, this bulb is built with constant-current circuitry, along with transient suppression. That means this bulb will last for years, not months, with no flickering or failure. And like every Diode Dynamics product, it's backed by an industry-leading three-year replacement warranty. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.Features 1157 LED Bulb HP11 LED Amber Four Direct replacement for factory 1157 incandescent bulb Increased output with LED Appearance Plug and play, simple installation What's Included Quantity: Single or Pair Warranty: 3 year warranty Return Policy: 30-day Return with no restocking fee 100 percent Satisfaction Guarantee Fitment Replacement for any 1157 bulb size, including BAY15D, 1034, 1178A, 2057A, 2357NA, 2357A, 1157A, 7528, 2057, 1016, 2357, 1196, 1157, 1142, 94, 3496, 2397, 2357ALL, 2057ALL, 7528L, 1157ST, 3496LL, 1034LL, 2397LL, 1157LL, 2057ST, 2357LL, 1157ALL, 2057LL, 7528LL. Plug and play, no modification needed. Bulb Size: 1157 Application: Front Turn Signal, Rear Turn Signal, Tail Light, Backup/Reverse Light Specifications Measured Lumens: 74 Beam Angle: Omnidirectional (270 degrees) Power (watts): 2.9 Operating Voltage: 9-16V Current (amps at 13.2V): 0.226 Polarity: Full Nonpolar (Standard and CK compatible) Operating Temperature: -40C to 85C (-40F to 185F) Connector(s): OEM-Size Plug and Play

Upgrade. Add more light output and a modern appearance to your vehicle with the 1157 HP11. Populated with four side-firing 1.5W LED chips and one 5W LED chip with a projector lens on top, the HP11. Housed in an aluminum casing for maximum heatsinking properties, the HP11 will last for years to come. Best of all, installation only takes minutes - simply take out your factory bulb and the HP11 will fit snugly in the socket. Brightness. At 310 lumens, the HP11 will provide more total light output than your factory bulb. If you are looking for maximum light output, we'd recommend checking out our XP80 option! All Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. Reliability. Unlike other bulbs on the market, this bulb is built with constant-current circuitry, along with transient suppression. That means this bulb will last for years, not months, with no flickering or failure. And like every Diode Dynamics product, it's backed by an industry-leading three-year replacement warranty. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.Features 1157 LED Bulb HP11 LED Amber Pair Direct replacement for factory 1157 incandescent bulb Increased output with LED Appearance Plug and play, simple installation What's Included Quantity: Single or Pair Warranty: 3 year warranty Return Policy: 30-day Return with no restocking fee 100 percent Satisfaction Guarantee Fitment Replacement for any 1157 bulb size, including BAY15D, 1034, 1178A, 2057A, 2357NA, 2357A, 1157A, 7528, 2057, 1016, 2357, 1196, 1157, 1142, 94, 3496, 2397, 2357ALL, 2057ALL, 7528L, 1157ST, 3496LL, 1034LL, 2397LL, 1157LL, 2057ST, 2357LL, 1157ALL, 2057LL, 7528LL. Plug and play, no modification needed. Bulb Size: 1157 Application: Front Turn Signal, Rear Turn Signal, Tail Light, Backup/Reverse Light Specifications Measured Lumens: 74 Beam Angle: Omnidirectional (270 degrees) Power (watts): 2.9 Operating Voltage: 9-16V Current (amps at 13.2V): 0.226 Polarity: Full Nonpolar (Standard and CK compatible) Operating Temperature: -40C to 85C (-40F to 185F) Connector(s): OEM-Size Plug and Play

Upgrade. Add more light output and a modern appearance to your vehicle with the 1157 HP11. Populated with four side-firing 1.5W LED chips and one 5W LED chip with a projector lens on top, the HP11. Housed in an aluminum casing for maximum heatsinking properties, the HP11 will last for years to come. Best of all, installation only takes minutes - simply take out your factory bulb and the HP11 will fit snugly in the socket. Brightness. At 310 lumens, the HP11 will provide more total light output than your factory bulb. If you are looking for maximum light output, we'd recommend checking out our XP80 option! All Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. Reliability. Unlike other bulbs on the market, this bulb is built with constant-current circuitry, along with transient suppression. That means this bulb will last for years, not months, with no flickering or failure. And like every Diode Dynamics product, it's backed by an industry-leading three-year replacement warranty. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.Features 1157 LED Bulb HP11 LED Amber Single Direct replacement for factory 1157 incandescent bulb Increased output with LED Appearance Plug and play, simple installation What's Included Quantity: Single or Pair Warranty: 3 year warranty Return Policy: 30-day Return with no restocking fee 100 percent Satisfaction Guarantee Fitment Replacement for any 1157 bulb size, including BAY15D, 1034, 1178A, 2057A, 2357NA, 2357A, 1157A, 7528, 2057, 1016, 2357, 1196, 1157, 1142, 94, 3496, 2397, 2357ALL, 2057ALL, 7528L, 1157ST, 3496LL, 1034LL, 2397LL, 1157LL, 2057ST, 2357LL, 1157ALL, 2057LL, 7528LL. Plug and play, no modification needed. Bulb Size: 1157 Application: Front Turn Signal, Rear Turn Signal, Tail Light, Backup/Reverse Light Specifications Measured Lumens: 74 Beam Angle: Omnidirectional (270 degrees) Power (watts): 2.9 Operating Voltage: 9-16V Current (amps at 13.2V): 0.226 Polarity: Full Nonpolar (Standard and CK compatible) Operating Temperature: -40C to 85C (-40F to 185F) Connector(s): OEM-Size Plug and Play

Upgrade. Add more light output and a modern appearance to your vehicle with the 1157 HP11. Populated with four side-firing 1.5W LED chips and one 5W LED chip with a projector lens on top, the HP11. Housed in an aluminum casing for maximum heatsinking properties, the HP11 will last for years to come. Best of all, installation only takes minutes - simply take out your factory bulb and the HP11 will fit snugly in the socket. Brightness. At 310 lumens, the HP11 will provide more total light output than your factory bulb. If you are looking for maximum light output, we'd recommend checking out our XP80 option! All Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. Reliability. Unlike other bulbs on the market, this bulb is built with constant-current circuitry, along with transient suppression. That means this bulb will last for years, not months, with no flickering or failure. And like every Diode Dynamics product, it's backed by an industry-leading three-year replacement warranty. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.Features 1157 LED Bulb HP11 LED Red Four Direct replacement for factory 1157 incandescent bulb Increased output with LED Appearance Plug and play, simple installation What's Included Quantity: Single or Pair Warranty: 3 year warranty Return Policy: 30-day Return with no restocking fee 100 percent Satisfaction Guarantee Fitment Replacement for any 1157 bulb size, including BAY15D, 1034, 1178A, 2057A, 2357NA, 2357A, 1157A, 7528, 2057, 1016, 2357, 1196, 1157, 1142, 94, 3496, 2397, 2357ALL, 2057ALL, 7528L, 1157ST, 3496LL, 1034LL, 2397LL, 1157LL, 2057ST, 2357LL, 1157ALL, 2057LL, 7528LL. Plug and play, no modification needed. Bulb Size: 1157 Application: Front Turn Signal, Rear Turn Signal, Tail Light, Backup/Reverse Light Specifications Measured Lumens: 74 Beam Angle: Omnidirectional (270 degrees) Power (watts): 2.9 Operating Voltage: 9-16V Current (amps at 13.2V): 0.226 Polarity: Full Nonpolar (Standard and CK compatible) Operating Temperature: -40C to 85C (-40F to 185F) Connector(s): OEM-Size Plug and Play

Upgrade. Add more light output and a modern appearance to your vehicle with the 1157 HP11. Populated with four side-firing 1.5W LED chips and one 5W LED chip with a projector lens on top, the HP11. Housed in an aluminum casing for maximum heatsinking properties, the HP11 will last for years to come. Best of all, installation only takes minutes - simply take out your factory bulb and the HP11 will fit snugly in the socket. Brightness. At 310 lumens, the HP11 will provide more total light output than your factory bulb. If you are looking for maximum light output, we'd recommend checking out our XP80 option! All Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. Reliability. Unlike other bulbs on the market, this bulb is built with constant-current circuitry, along with transient suppression. That means this bulb will last for years, not months, with no flickering or failure. And like every Diode Dynamics product, it's backed by an industry-leading three-year replacement warranty. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.Features 1157 LED Bulb HP11 LED Red Pair Direct replacement for factory 1157 incandescent bulb Increased output with LED Appearance Plug and play, simple installation What's Included Quantity: Single or Pair Warranty: 3 year warranty Return Policy: 30-day Return with no restocking fee 100 percent Satisfaction Guarantee Fitment Replacement for any 1157 bulb size, including BAY15D, 1034, 1178A, 2057A, 2357NA, 2357A, 1157A, 7528, 2057, 1016, 2357, 1196, 1157, 1142, 94, 3496, 2397, 2357ALL, 2057ALL, 7528L, 1157ST, 3496LL, 1034LL, 2397LL, 1157LL, 2057ST, 2357LL, 1157ALL, 2057LL, 7528LL. Plug and play, no modification needed. Bulb Size: 1157 Application: Front Turn Signal, Rear Turn Signal, Tail Light, Backup/Reverse Light Specifications Measured Lumens: 74 Beam Angle: Omnidirectional (270 degrees) Power (watts): 2.9 Operating Voltage: 9-16V Current (amps at 13.2V): 0.226 Polarity: Full Nonpolar (Standard and CK compatible) Operating Temperature: -40C to 85C (-40F to 185F) Connector(s): OEM-Size Plug and Play

Upgrade. Add more light output and a modern appearance to your vehicle with the 1157 HP11. Populated with four side-firing 1.5W LED chips and one 5W LED chip with a projector lens on top, the HP11. Housed in an aluminum casing for maximum heatsinking properties, the HP11 will last for years to come. Best of all, installation only takes minutes - simply take out your factory bulb and the HP11 will fit snugly in the socket. Brightness. At 310 lumens, the HP11 will provide more total light output than your factory bulb. If you are looking for maximum light output, we'd recommend checking out our XP80 option! All Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. Reliability. Unlike other bulbs on the market, this bulb is built with constant-current circuitry, along with transient suppression. That means this bulb will last for years, not months, with no flickering or failure. And like every Diode Dynamics product, it's backed by an industry-leading three-year replacement warranty. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.Features 1157 LED Bulb HP11 LED Red Single Direct replacement for factory 1157 incandescent bulb Increased output with LED Appearance Plug and play, simple installation What's Included Quantity: Single or Pair Warranty: 3 year warranty Return Policy: 30-day Return with no restocking fee 100 percent Satisfaction Guarantee Fitment Replacement for any 1157 bulb size, including BAY15D, 1034, 1178A, 2057A, 2357NA, 2357A, 1157A, 7528, 2057, 1016, 2357, 1196, 1157, 1142, 94, 3496, 2397, 2357ALL, 2057ALL, 7528L, 1157ST, 3496LL, 1034LL, 2397LL, 1157LL, 2057ST, 2357LL, 1157ALL, 2057LL, 7528LL. Plug and play, no modification needed. Bulb Size: 1157 Application: Front Turn Signal, Rear Turn Signal, Tail Light, Backup/Reverse Light Specifications Measured Lumens: 74 Beam Angle: Omnidirectional (270 degrees) Power (watts): 2.9 Operating Voltage: 9-16V Current (amps at 13.2V): 0.226 Polarity: Full Nonpolar (Standard and CK compatible) Operating Temperature: -40C to 85C (-40F to 185F) Connector(s): OEM-Size Plug and Play

Upgrade. Add dual color functionality and a modern appearance to your front turn signals with the 1157 HP24. Populated with sixteen amber chips and eight white chips, this bulb lights up white when your headlights are turned on, and flashes amber when the turn signals are activated. Housed in an aluminum casing for maximum heatsinking properties, the HP24 will last for years to come. Best of all, installation only takes minutes - simply take out your factory bulb and the HP24 will fit snugly in the socket. Switchback. Some vehicles use a dual filament front turn signal bulb, which allows you to add switchback functionality to your turn signal location. From the factory, the front turn signal lights up half power amber when the headlights are on, and flashes full power amber when the turn signal is activated. By using this dual-filament design, along with the embedded digital timing circuit, you can upgrade this look: the HP24 lights up in a 6000K cool white color when your headlights are turned on, and flashes amber when the turn signal is activated. When you switch the turn signal off, it switches back to white. This allows you to upgrade your front end to an all cool white appearance, while still keeping your turn signal functionality. The HP24 bulb is only suitable for vehicles that have a clear front turn signal reflector lens. Brightness. At 410 lumens, the HP24 will provide about double the total light output compared to your factory bulb. All Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. Reliability. Unlike other bulbs on the market, this bulb is built with constant-current circuitry, along with transient suppression. That means this bulb will last for years, not months, with no flickering or failure. And like every Diode Dynamics product, it's backed by an industry-leading three-year replacement warranty. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.Features 1157 LED Bulb HP24 Dual-Color LED Cool White Pair Direct replacement for factory 1157 incandescent front turn signal bulb Adds cool white running light, along with amber turn signal No yellow appearance when switched off Non-polar and CK compatible Plug and play, simple installation What's Included Quantity: Pair Warranty: 3 year warranty Return Policy: 30-day Return with no restocking fee 100 percent Satisfaction Guarantee Fitment The HP24 Switchback bulb is compatible with any dual-filament 1157-size front turn signal bulb with a clear reflector lens Bulb Size: 1157 Application: Front Turn Signal Electrical Compatibility: Requires hyperblink fix (resistors or flasher) Specifications Color Temperature: 6000K Cool White and Amber Measured Lumens: 405 Beam Angle: Omnidirectional (270 degrees) Power (watts): 5.4 Operating Voltage: 9-16V Current (amps at 13.2V): 0.410 Polarity: Full Nonpolar (Standard and CK compatible) Operating Temperature: -40C to 85C (-40F to 185F) Connector(s): OEM-Size Plug and Play Driver Features: Constant Current

Upgrade. Add dual color functionality and a modern appearance to your front turn signals with the 1157 HP24. Populated with sixteen amber chips and eight white chips, this bulb lights up white when your headlights are turned on, and flashes amber when the turn signals are activated. Housed in an aluminum casing for maximum heatsinking properties, the HP24 will last for years to come. Best of all, installation only takes minutes - simply take out your factory bulb and the HP24 will fit snugly in the socket. Switchback. Some vehicles use a dual filament front turn signal bulb, which allows you to add switchback functionality to your turn signal location. From the factory, the front turn signal lights up half power amber when the headlights are on, and flashes full power amber when the turn signal is activated. By using this dual-filament design, along with the embedded digital timing circuit, you can upgrade this look: the HP24 lights up in a 6000K cool white color when your headlights are turned on, and flashes amber when the turn signal is activated. When you switch the turn signal off, it switches back to white. This allows you to upgrade your front end to an all cool white appearance, while still keeping your turn signal functionality. The HP24 bulb is only suitable for vehicles that have a clear front turn signal reflector lens. Brightness. At 410 lumens, the HP24 will provide about double the total light output compared to your factory bulb. All Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. Reliability. Unlike other bulbs on the market, this bulb is built with constant-current circuitry, along with transient suppression. That means this bulb will last for years, not months, with no flickering or failure. And like every Diode Dynamics product, it's backed by an industry-leading three-year replacement warranty. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.Features 1157 LED Bulb HP24 Dual-Color LED Cool White Single Direct replacement for factory 1157 incandescent front turn signal bulb Adds cool white running light, along with amber turn signal No yellow appearance when switched off Non-polar and CK compatible Plug and play, simple installation What's Included Quantity: Single Warranty: 3 year warranty Return Policy: 30-day Return with no restocking fee 100 percent Satisfaction Guarantee Fitment The HP24 Switchback bulb is compatible with any dual-filament 1157-size front turn signal bulb with a clear reflector lens Bulb Size: 1157 Application: Front Turn Signal Electrical Compatibility: Requires hyperblink fix (resistors or flasher) Specifications Color Temperature: 6000K Cool White and Amber Measured Lumens: 405 Beam Angle: Omnidirectional (270 degrees) Power (watts): 5.4 Operating Voltage: 9-16V Current (amps at 13.2V): 0.410 Polarity: Full Nonpolar (Standard and CK compatible) Operating Temperature: -40C to 85C (-40F to 185F) Connector(s): OEM-Size Plug and Play Driver Features: Constant Current

Upgrade. Add a modern appearance to your vehicle with the 1157 HP48. Populated with 48 Epistar 3014 LED chips, the HP48 upgrades the factory yellowish incandescent bulb to a modern cool white appearance. Thanks to the cap on the top, the light output is directed backwards and away from the bulb, instead of straight out. A diffused PC lens surrounds the LED chips, allowing the light output to shine much more uniformly. Best of all, installation only takes minutes - simply take out your factory bulb and the HP48 will fit snugly in the socket. Brightness. At 250 lumens, the HP48 will provide slightly more light output compared to your factory bulb. If you are looking to increase output, we'd recommend checking out our HP11 and XP80 options! All Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. Reliability. Unlike other bulbs on the market, this bulb is built with constant-current circuitry, along with transient suppression. That means this bulb will last for years, not months, with no flickering or failure. And like every Diode Dynamics product, it's backed by an industry-leading three-year replacement warranty. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.Features 1157 LED Bulb HP48 LED Amber Four Direct replacement for factory 1157 incandescent bulb Adds more modern, LED appearance Plug and play, simple installation What's Included Warranty: 3 year warranty Return Policy: 30-day Return with no restocking fee 100 percent Satisfaction Guarantee Fitment Replacement for any 1157 bulb size, including BAY15D, 1034, 1178A, 2057A, 2357NA, 2357A, 1157A, 7528, 2057, 1016, 2357, 1196, 1157, 1142, 94, 3496, 2397, 2357ALL, 2057ALL, 7528L, 1157ST, 3496LL, 1034LL, 2397LL, 1157LL, 2057ST, 2357LL, 1157ALL, 2057LL, 7528LL Plug and play, no modification needed Bulb Size: 1157 Specifications Measured Lumens: 250 Beam Angle: Omnidirectional (270 degrees) Power (watts): 2.7 Operating Voltage: 9-16V Current (amps at 13.2V): 0.23 Polarity: Nonpolar Operating Temperature: -40C to 85C (-40F to 185F) Connector(s): OEM-Size Plug and Play

Upgrade. Add a modern appearance to your vehicle with the 1157 HP48. Populated with 48 Epistar 3014 LED chips, the HP48 upgrades the factory yellowish incandescent bulb to a modern cool white appearance. Thanks to the cap on the top, the light output is directed backwards and away from the bulb, instead of straight out. A diffused PC lens surrounds the LED chips, allowing the light output to shine much more uniformly. Best of all, installation only takes minutes - simply take out your factory bulb and the HP48 will fit snugly in the socket. Brightness. At 250 lumens, the HP48 will provide slightly more light output compared to your factory bulb. If you are looking to increase output, we'd recommend checking out our HP11 and XP80 options! All Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. Reliability. Unlike other bulbs on the market, this bulb is built with constant-current circuitry, along with transient suppression. That means this bulb will last for years, not months, with no flickering or failure. And like every Diode Dynamics product, it's backed by an industry-leading three-year replacement warranty. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.Features 1157 LED Bulb HP48 LED Amber Pair Direct replacement for factory 1157 incandescent bulb Adds more modern, LED appearance Plug and play, simple installation What's Included Warranty: 3 year warranty Return Policy: 30-day Return with no restocking fee 100 percent Satisfaction Guarantee Fitment Replacement for any 1157 bulb size, including BAY15D, 1034, 1178A, 2057A, 2357NA, 2357A, 1157A, 7528, 2057, 1016, 2357, 1196, 1157, 1142, 94, 3496, 2397, 2357ALL, 2057ALL, 7528L, 1157ST, 3496LL, 1034LL, 2397LL, 1157LL, 2057ST, 2357LL, 1157ALL, 2057LL, 7528LL Plug and play, no modification needed Bulb Size: 1157 Specifications Measured Lumens: 250 Beam Angle: Omnidirectional (270 degrees) Power (watts): 2.7 Operating Voltage: 9-16V Current (amps at 13.2V): 0.23 Polarity: Nonpolar Operating Temperature: -40C to 85C (-40F to 185F) Connector(s): OEM-Size Plug and Play