Resistors

This listing features a Pair (2 Pieces) of Brand New, 50W 6Ohm Load Resistors with T-Tap included. Features: 100% Brand New Package comes 2x 50w 6Ohms Load Resistor for Auto & Motorcycle LED Lighting Repair Blinker Flash Error, Hyper or Error Flashing of LED Turning, Parking, and Driving Signal or License Plate Light Works as Warning Canceller, Decoder, Capacitor, or Blinker Rapid Flash Equalizer for LED lights Bulb: 1156, 1157, 3156, 3157, 7440, 7443 and so on. - Brand new and high quality; - Can be used with vehicle turn signal light's LED conversion; - Solve hyper flash or no blinking of turn signal; - Each LED bulb installation requires one resistor connected in parallel (see additional pictures for instruction);   Includes: 1. Two Pieces (2pcs)of Brand New Load Resistors 2. Four pieces (4pcs) T-Taps Specification: 1.Voltage: DC 12V 2.Number: 4PCS of 6 Ohm 50W LED Load Resistors 3.Type: One LED resistor is required for each turn signal bulb, parking light bulb, or each license plate light bulb. 4.Dimension: 15mm X 50mm 5.Weight: 31.47g 6. Feature: -Solution for "bulb out signal" / "OBC error message" after installing SMD LED light bulb -Solution for fast turn signal blinking response after installing SMD LED light bulb Common Part Number Cross Reference Part Number 1157 BA15s 1016 1034 1076 1130 1154 1157 1158 1493 2057 2357 2397 7528 1156 BAY15d 1073 1093 1129 1141 1156 1159 1295 1459 1619 1651 1680 7506 S25 7527 7507 BAU15s PY21W 7443 7444 7443 7441 7440 T20 7440 992A  7440 (A refers to Amber) T20 3157 3057 3155 3357 3457 4157 3156 3056 3456 4156    Troubleshooting Note:   - If they don't light after inserting into the socket, insert oppositely - When using LED bulbs for turn signal, you will need to use the above load resistor or decoder set to prevent hyper flash or bulb malfunction.  

50 watts, 6 ohm load resistor simulates an incandescent light to prevent hyper flashing, no flashing, or lights out warning when converting an incandescent bulb to LED due to the lower power draw of LED bulbs.