Lighting

Products: 112 of 44
  • 12V -32V Computer Canceler Harness for Canbus Error Free Function Race Sport Lighting
    Computer error prevention cables eliminate dash lights and warnings that are common with aftermarket lighting installations. 1 Year Warranty Details: 12V -32V Computer Canceler Harness for Canbus Error Free Function Computer error prevention cables Eliminate dash lights and warnings that are common with aftermarket lighting installations 1 Year Warranty
    • $6.99
    10 left in stock. Backorder available
  • NextGen 7 Inch LL Series LED and Laser Sealed Beam Auxiliary Work Lights Pair Race Sport Lighting
    The new LL Series 7-inch spot lights from Race Sport Lighting provide up to over 1-mile of light range down the road for extreme off roading safety generated by our long range laser illumination light scope in the middle of the spot light. Which means that you can see farther down the path in any off-road adventure, or situation where your work truck is moving loads at night down dark never ending roads with no street lights, therefore getting your precious cargo to the point of destination safer and allowing you 10 times as much stopping distance to obstructions. The Laser + LED spot lights have the high power LED diodes you trust in the opticals for the wide range, PLUS a Laser light scope in the middle for a very focused straight beam that travels as far as 1.2 miles down the road or path. This is the 1st generation of premium dual function laser spot lights released by Race Sport lighting as we continue to strive to provide functional work lights that people can use in their adventures and travels in secluded destinations. The heavy duty construction will give you years of use, and the LED + Laser light sources will give you the safety you need and deserve out of an auxiliary light. Our spots have lasers that have been registered with the FDA, and are great for many offroad and on road excursions. The Laser produces a white Illumination beam that is super focused for long distances down the road. Because of the extreme power of these spot lights, it is not recommended to use these on road in congested areas with other cars in every day driving situations.
    • $704.99
    10 left in stock. Backorder available
  • H4-3 Bixenon Harness Hi/lo Controller Cables for Xenon HID systems Sold as Pairs Race Sport Lighting
    H4-3 Bixenon Harness Hi/lo Controller Cables for Xenon HID systems Sold as Pairs Race Sport Lighting Details: H4-3 Bixenon Harness Hi/lo Controller Cables For Xenon HID systems Sold as Pairs
    • $35.99
    10 left in stock. Backorder available
  • H13-3 Bixenon Harness Hi/lo Controller Cables for Xenon HID systems Sold as Pairs Race Sport Lighting
    H13-3 Bixenon Harness Hi/lo Controller Cables for Xenon HID systems Sold as Pairs Race Sport Lighting Details: H13-3 Bixenon Harness Hi/lo Controller Cables for Xenon HID systems Sold as Pairs
    • $6.99
    10 left in stock. Backorder available
  • 9007-3 Bixenon Harness Hi/lo Controller Cables for Xenon HID Systems Sold as Pairs Race Sport Lighting
    9007-3 Bixenon Harness Hi/lo Controller Cables for Xenon HID systems Sold as Pairs Race Sport Lighting Details: 9007-3 Bixenon Harness Hi/lo Controller Cables for Xenon HID systems Sold as Pairs
    • $17.99
    10 left in stock. Backorder available
  • 9007 Bixenon Interface Harness for LED Conversions Race Sport Lighting
    This Race Sport Lighting relay harness is most commonly used in aftermarket LED or HID conversions to bypass the factory wiring in order to get around complicated electronic control systems or to allow a higher rate of current to be delivered to the kits. This relay harness utilizes a 30A fuse-protected power wire that directly connects to your positive terminal on the battery. An automotive relay is used to pull signal from your headlight connector to trigger power to be drawn from the battery. This insures that your LED or HID headlight conversion is receiving proper uninterrupted power. This can also be used with OEM halogen bulbs to provide better voltage. Details: Great for Jeeps of all years and vintage vehicles Sold individually One harness handles both left and right headlamps 1 Year Warranty
    • $36.99
    10 left in stock. Backorder available
  • 9004 Bixenon Interface Harness for LED Conversions Race Sport Lighting
    This Race Sport Lighting relay harness is most commonly used in aftermarket LED or HID conversions to bypass the factory wiring in order to get around complicated electronic control systems or to allow a higher rate of current to be delivered to the kits. This relay harness utilizes a 30A fuse-protected power wire that directly connects to your positive terminal on the battery. An automotive relay is used to pull signal from your headlight connector to trigger power to be drawn from the battery. This insures that your LED or HID headlight conversion is receiving proper uninterrupted power. This can also be used with OEM halogen bulbs to provide better voltage. Great for Jeeps of all years and vintage vehicles. Sold individually. One harness handles both left and right headlamps. 1 Year Warranty
    • $36.99
    10 left in stock. Backorder available
  • H13 Bixenon Interface Harness for LED Conversions Race Sport Lighting
    This Race Sport Lighting relay harness is most commonly used in aftermarket LED or HID conversions to bypass the factory wiring in order to get around complicated electronic control systems or to allow a higher rate of current to be delivered to the kits. This relay harness utilizes a 30A fuse-protected power wire that directly connects to your positive terminal on the battery. An automotive relay is used to pull signal from your headlight connector to trigger power to be drawn from the battery. This insures that your LED or HID headlight conversion is receiving proper uninterrupted power. This can also be used with OEM halogen bulbs to provide better voltage. Details: Great for Jeeps of all years and vintage vehicles. Sold individually. One harness handles both left and right headlamps 1 Year Warranty
    • $36.99
    10 left in stock. Backorder available
  • H4 Bixenon Interface Harness for LED Conversions Race Sport Lighting
    This Race Sport Lighting relay harness is most commonly used in aftermarket LED or HID conversions to bypass the factory wiring in order to get around complicated electronic control systems or to allow a higher rate of current to be delivered to the kits. This relay harness utilizes a 30A fuse-protected power wire that directly connects to your positive terminal on the battery. An automotive relay is used to pull signal from your headlight connector to trigger power to be drawn from the battery. This insures that your LED or HID headlight conversion is receiving proper uninterrupted power. This can also be used with OEM halogen bulbs to provide better voltage. Details: Great for Jeeps of all years and vintage vehicles Sold individually One harness handles both left and right headlamps 1 Year Warranty
    • $36.99
    10 left in stock. Backorder available
  • 9007 Plug-and-Play Interface Cable w/ 2 resistors Pair Race Sport Lighting
    These dual load resistors prevent the computer from faulting when aftermarket 9007 Bixenon LED or HID kits are installed, preventing unwanted error lights. Simple Plug-N-Play design. Load Resistors must be mounted to metal and not plastic or other easily melted materials. Sold in pairs. 1 Year Warranty Details: Dual load resistors prevent the computer from faulting when aftermarket 9007 Bixenon LED or HID kits are installed Prevents unwanted error lights. Simple Plug-N-Play design Load Resistors must be mounted to metal and Not plastic or other easily melted materials Sold in pairs 1 Year Warranty
    • $35.99
    10 left in stock. Backorder available
  • H13 Plug-and-Play Interface Cable w/ 2 resistors Pair Race Sport Lighting
    These dual load resistors prevent the computer from faulting when aftermarket H13 Bixenon LED or HID kits are installed, preventing unwanted error lights. Simple Plug-N-Play design. Load Resistors must be mounted to metal and Not plastic or other easily melted materials. Sold in pairs. 1 Year Warranty Details: Dual load resistors prevent the computer from faulting when aftermarket H13 Bixenon LED or HID kits are installed Simple Plug-N-Play design. Load Resistors must be mounted to metal and Not plastic or other easily melted materials. Sold in pairs. 1 Year Warranty
    • $35.99
    10 left in stock. Backorder available
  • 12V Relay Harness w/ Capacitors Race Sport Lighting
    Heavy duty, multi-purpose interface harness for our HID or LED kits. On vehicles with daytime running lights, this harness will retain the daytime running light function, On vehicles with 6-11V, the trigger input on this harness will handle the lower voltage and keep the relay open. On vehicles with pulsed voltage instead of a steady voltage, the trigger input on this harness will handle the pulsed voltage and keep the relay open. Note: When installing this harness be aware of the polarity, make sure 12C+ and Ground on the vehicles light plug matches up with 12V+ and Ground on the trigger plug on our harness. Failure to do so will impair correct operation and may damage the harness. 1 Year Warranty Details: Heavy duty, multi-purpose interface harness for our HID or LED kits On vehicles with daytime running lights, this harness will retain the daytime running light function On vehicles with 6-11V, the trigger input on this harness will handle the lower voltage and keep the relay open On vehicles with pulsed voltage instead of a steady voltage, the trigger input on this harness will handle the pulsed voltage and keep the relay open 1 Year Warranty
    • $33.99
    10 left in stock. Backorder available
Products: 112 of 44
  • 4X6" Red LED COB Halo Crystal Glass/Metal Headlight H4 6K HID Light Bulb Pair
    OCTANE LIGHTING - 4"x6" DIAMOND CRYSTAL CLEAR GLASS LENS / METAL HOUSING H4 CONVERSION HEADLIGHTS WITH BUILT IN RED COB LED HALO ANGEL EYE RINGS - PAIRHalo rings can be wired into the parking lights, headlights, turn signals, or connected to a separate switch.Extremely Bright Halo Ring! - Day or NightINCLUDES 6000K HIGH INTENSITY DISCHARGE (HID) HI/LOW BI-XENON SLIM BALLAST LIGHT BULB KIT! PAIR - LEFT & RIGHT SIDE New PAIR of 2 Headlamps SAE/DOT Approved - Street Legal3000 Lumen Headlight BrightnessDaylight White Visibility6000k (White Color) AC Slim Ballast 35w Bi-Xenon HID KitHigh & Low Beam FunctionPlugs into Factory Wiring ConnectionBrighter and Whiter than stock headlights High Quality Glass Faced & Metal Backed Semi-Sealed Beam - Removable / Replaceable Light Bulbs Fits cars and trucks with 4x6 rectangle headlightsFits into stock headlight bucketPart number interchange: H4651/H4656/4651/4652Halo is wired separately with power/ground wireExtremely Bright Halo - Visible day or nightDOT / SAE approved THIS LISTING IS FOR A NEW PAIR - 4x6" CRYSTAL CLEAR GLASS LENS / METAL BACKSIDE H4 CONVERSION RED LED HALO HEADLIGHTS. INCLUDES 6000K BI-XENON HI/LOW SUPER BRIGHT WHITE HID KITS. THIS SET INCLUDES (2) HEADLIGHTS, (2) 6K HID BULBS, (2) HID SLIM DIGITAL BALLASTS AND RELAY HARNESSES. THESE HAVE THE ORIGINAL SHAPED PRONGS ON THE BACK SO THEY WILL PLUG RIGHT INTO YOUR ORIGINAL WIRING HARNESS PLUGS. IN RARE CIRCUMSTANCES, WIRING MODIFICATION MAY BE REQUIRED. THIS KIT IS BI-XENON, MEANING YOU WILL HAVE LOW BEAM AND HIGH BEAM FUNCTION WITH THE HID LIGHT KIT. THE HALO IS EXTREMELY BRIGHT AND WIRED SEPARATELY WITH A POWER AND GROUND WIRE. THE HALO CAN BE SPLICED INTO THE PARKING LIGHTS, TURN SIGNAL, IGNITION SOURCE FOR DAYTIME RUNNING LIGHTS, OR TO A SEPARATE SWITCH. THESE ARE FOR ANY CAR OR TRUCK THAT HAS 4 SQUARE 4x6" HEADLIGHTS. DOT / SAE APPROVED.INTERCHANGE: H4651 / H4656 / 4651 / 4652 THESE ARE GLASS AND WE WILL TAKE EXTRA CARE IN PACKAGING. UNRIVALED BRIGHTNESS The Standard for 35w HID Kit 3000 lumen @ 35 watts Ultra Bright HID Kit - 35% brighter than 35w DC Analog HID KitsOctane HID Bulbs - High and Low Beam Function Pushing 3000 Lumens!AC Digital Technology - No Flickering. PERIOD.Waterproof Ballasts - We coat our chips with silicone to ensure maximum protection20 Minute Setup - QuickSnapTM connectors gets you back on the road quicker Why Choose Octane Lighting? We dont cut corners. We pride ourselves on quality and reliability. Every component of this HID kit goes through a series of Quality Assurance Tests to ensure consistent color matching and stable power output. Although many HID companies use similar ballast housings, the internal components are always different and inferior. Trust the original. Trust what lasts. Your Comprehensive HID Conversion Kit Includes: (2) AC Digital 35w Power Ballasts (2) AC Ballast Igniters (2) 35w-Rated HID Bulbs (2) HID Capacitors (1) HID Power Relay Harness (2) Metal Mounting Brackets and Screws (1) Easy-to-Use Installation Instructions Features: AC Series Ballast: 35w Power Output Provides Maximum Light and Cverage Where You Need ItBetter, Brighter, Longer: Octane HID bulbs uses power more efficiently to optimally achieve an ultra-bright 3000 lumens shine while extending the bulbs life to over 3000 hoursPlug-and-Play Installation: Just connect QuickSnap™ connectors, securely lock Octane Lighting bulbs into housing and youre done. No cutting, splicing or headachesComprehensive HID kit that includes a relay harness and capacitors. Everything you need is included!
    • $209.95
  • 7X6" LED HID Light Bulbs Crystal Clear Sealed Beam Headlamp Headlight Pair
    THESE ARE A 7x6 PAIR WHITE HID LED HEADLIGHTS Replaces factory Sealed Beams - Plugs into factory headlight plugsINCLUDES (2) 15-LED DUAL BEAM HEADLIGHT ASSEMBLIESTHIS LISTING IS FOR A PAIR NEW 7x6" CRYSTAL CLEAR LENS - ALUMINUM BACKED HEADLAMP BULBS WITH 15 WHITE LEDs INSIDE THE HOUSING. THIS LISTING IS FOR 2 HEADLIGHTS. THESE WILL FIT ANY CAR OR TRUCK THAT HAS 7X6 or 5x7 INCH HEADLIGHTS. SOME MODIFICATION TO THE HEADLIGHT BUCKET MAY BE REQUIRED, BUT ON MOST CARS THEY ARE PLUG AND PLAY AND WILL ONLY TAKE YOU 15 MINUTES TO INSTALL WITH BASIC HAND TOOLS. WE WILL TAKE EXTRA CARE IN PACKAGING.INTERCHANGE: H6054 / 6054 ITEM SPECIFICS:Power Draw: 12V / 55 WBeam Pattern: Flood Beam/ Spot BeamLight Output: High Beam 3200 lumens per assembly, Low Beam 1550 lumens per assemblyColor Temperature: 5000K, 6000KOperating Voltage: 12V DCOperating Amperage: 3A at 12VWattage: 45WWaterproof Rating: IP68Light: 15 3W LEDsHousing Material: Black AluminumLens Material: Clear Polycarbonate Lens LensHours: 5000+ HoursDimensions: L-3" X W-7" X H-6"
    • $59.95
    Out of stock
  • 7" Blue Halo Ring Angel Eyes 6K 20/40w LED Headlight Headlamp Light Bulbs Pair
    OCTANE LIGHTINGPAIR - New 7" Split Circuit LED Halo Headlights   Blue LED Rings can be Wired to be Daytime Running Lights, Directional Turn Signals or to Come on with the Headlights Includes Super White 6K 20/40w G5 LED Headlight BulbsPAIR - Two Headlights7" Round Crystal Clear Glass LED Headlight w/ Blue LED Halo RingHalo Ring Has Bright LEDs Around Entire HeadlightCrystal Clear Glass Lens6000k 20/40w LED Headlight BulbsLow Beam / High Beam HeadlightHeadlight Plugs Directly into Factory Headlight Wiring Connector PlugSome Modification to the Back of the Headlight Bucket May be RequiredUnique Split Circuit Halo is Wired Separately - Can Be Used As DRL or Left & Right Directional Turn SignalsPart Number Interchange: H6024 / 6014DOT / SAE ApprovedLED BULB SPECIFICATIONS:Bulb Type: - Generation 5 - H4 (9003) LED Low Beam / High Beam Headlight with Canbus Error Canceller PlugsCanbus Error Free Electrical plugs prevent any headlight error codesWattage: 40W / EACH PC Luminous Flux: 8000LM / Set ,4000LM / Each Bulb  Beam Angle: 360°  Placement on Vehicle: Left, Right, FrontColor Temperature: 6000K Pure White
    • $119.95
  • 552 Heavy Duty Thermal Flasher 2-Terminal Auto Turn Signal Hazard Lights 12 Volt
    Features 552 12v Thermal Flasher 32CP MAX 6 12 Volt, 2 pin, 2-6 lamp Thermal design Turn signal DOT approved Previously sold as V552
    • $7.95
    Out of stock

Browse by Vehicle