H4 LED Bulbs

Products: 112 of 15
  • 6500k H4 SMD COB 360° LED White Motorcycle Headlight HID Hi/Low Light Bulb
    ONE - (1) LED BULB Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,500 Lumen Bulbs 2,500 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,000 Lumens of light and draws 18 watts of energy on the low beam setting; but produces 2,500 Lumens of light and draws 24 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,000 Lumens Low Beam / 2,500 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle18 Watts Low Beam / 24 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for cooling LED Chips per bulbAll-In-One Design. No Ballast or Driver Required: Newest TechnologyLED Protection Circuit to protect from reverse polarity, low voltage or high voltage spikes. Smart and Efficient Cooling System uses Built-In Cooling Fan. Greater Visibility - 3 times brighter than factory halogen bulbs.High luminous efficacy Flux: 2,500/2,000lm.High quality Aluminum heat sink ensures proper temperature regulation.Lower Power Consumption than Halogen bulb.Vibration proof design.30,000 Hour LifespanEasy installation, Plug and Play, No modification requiredNo Splicing of harnesses required for LED bulbsUses 75% less power than Halogen or HID bulbs3 times brighter than stock halogen bulbsOBC Error free operationDramatically improves visibility at night THIS KIT IS DESIGNED FOR H4 CONVERSION HEADLIGHTS AND WILL NOT WORK IN SEALED BEAM HEADLIGHTS.
    Not rated yet
    • $44.95
  • 6500k H4 SMD COB 360° LED White Motorcycle Headlight HID Hi/Low Light Bulb
    ONE - (1) LED BULB Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,500 Lumen Bulbs 2,500 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,000 Lumens of light and draws 18 watts of energy on the low beam setting; but produces 2,500 Lumens of light and draws 24 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,000 Lumens Low Beam / 2,500 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle18 Watts Low Beam / 24 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for cooling LED Chips per bulbAll-In-One Design. No Ballast or Driver Required: Newest TechnologyLED Protection Circuit to protect from reverse polarity, low voltage or high voltage spikes. Smart and Efficient Cooling System uses Built-In Cooling Fan. Greater Visibility - 3 times brighter than factory halogen bulbs.High luminous efficacy Flux: 2,500/2,000lm.High quality Aluminum heat sink ensures proper temperature regulation.Lower Power Consumption than Halogen bulb.Vibration proof design.30,000 Hour LifespanEasy installation, Plug and Play, No modification requiredNo Splicing of harnesses required for LED bulbsUses 75% less power than Halogen or HID bulbs3 times brighter than stock halogen bulbsOBC Error free operationDramatically improves visibility at night THIS KIT IS DESIGNED FOR H4 CONVERSION HEADLIGHTS AND WILL NOT WORK IN SEALED BEAM HEADLIGHTS.
    Not rated yet
    • $44.95
  • 6500k H4 SMD COB 360° LED White Motorcycle Headlight HID Hi/Low Light Bulb
    ONE - (1) LED BULB Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,500 Lumen Bulbs 2,500 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,000 Lumens of light and draws 18 watts of energy on the low beam setting; but produces 2,500 Lumens of light and draws 24 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,000 Lumens Low Beam / 2,500 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle18 Watts Low Beam / 24 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for cooling LED Chips per bulbAll-In-One Design. No Ballast or Driver Required: Newest TechnologyLED Protection Circuit to protect from reverse polarity, low voltage or high voltage spikes. Smart and Efficient Cooling System uses Built-In Cooling Fan. Greater Visibility - 3 times brighter than factory halogen bulbs.High luminous efficacy Flux: 2,500/2,000lm.High quality Aluminum heat sink ensures proper temperature regulation.Lower Power Consumption than Halogen bulb.Vibration proof design.30,000 Hour LifespanEasy installation, Plug and Play, No modification requiredNo Splicing of harnesses required for LED bulbsUses 75% less power than Halogen or HID bulbs3 times brighter than stock halogen bulbsOBC Error free operationDramatically improves visibility at night THIS KIT IS DESIGNED FOR H4 CONVERSION HEADLIGHTS AND WILL NOT WORK IN SEALED BEAM HEADLIGHTS.
    Not rated yet
    • $44.95
  • 6500k H4 SMD COB 360° LED White Motorcycle Headlight HID Hi/Low Light Bulb
    ONE - (1) LED BULB Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,500 Lumen Bulbs 2,500 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,000 Lumens of light and draws 18 watts of energy on the low beam setting; but produces 2,500 Lumens of light and draws 24 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,000 Lumens Low Beam / 2,500 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle18 Watts Low Beam / 24 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for cooling LED Chips per bulbAll-In-One Design. No Ballast or Driver Required: Newest TechnologyLED Protection Circuit to protect from reverse polarity, low voltage or high voltage spikes. Smart and Efficient Cooling System uses Built-In Cooling Fan. Greater Visibility - 3 times brighter than factory halogen bulbs.High luminous efficacy Flux: 2,500/2,000lm.High quality Aluminum heat sink ensures proper temperature regulation.Lower Power Consumption than Halogen bulb.Vibration proof design.30,000 Hour LifespanEasy installation, Plug and Play, No modification requiredNo Splicing of harnesses required for LED bulbsUses 75% less power than Halogen or HID bulbs3 times brighter than stock halogen bulbsOBC Error free operationDramatically improves visibility at night THIS KIT IS DESIGNED FOR H4 CONVERSION HEADLIGHTS AND WILL NOT WORK IN SEALED BEAM HEADLIGHTS.
    Not rated yet
    • $44.95
  • 6500k H4 SMD COB 360° LED White Motorcycle Headlight Light Bulb Fits Harley
    ONE - (1) LED BULB - Replaces Stock Harley Davidson H4/9003 Bulb Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,500 Lumen Bulbs 2,500 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,000 Lumens of light and draws 18 watts of energy on the low beam setting; but produces 2,500 Lumens of light and draws 24 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,000 Lumens Low Beam / 2,500 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle18 Watts Low Beam / 24 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for cooling LED Chips per bulbAll-In-One Design. No Ballast or Driver Required: Newest TechnologyLED Protection Circuit to protect from reverse polarity, low voltage or high voltage spikes. Smart and Efficient Cooling System uses Built-In Cooling Fan. Greater Visibility - 3 times brighter than factory halogen bulbs.High luminous efficacy Flux: 2,500/2,000lm.High quality Aluminum heat sink ensures proper temperature regulation.Lower Power Consumption than Halogen bulb.Vibration proof design.30,000 Hour LifespanEasy installation, Plug and Play, No modification requiredNo Splicing of harnesses required for LED bulbsUses 75% less power than Halogen or HID bulbs3 times brighter than stock halogen bulbsOBC Error free operationDramatically improves visibility at night THIS KIT IS DESIGNED FOR H4 CONVERSION HEADLIGHTS AND WILL NOT WORK IN SEALED BEAM HEADLIGHTS.
    Not rated yet
    • $44.95
  • 6K 4000Lm H4 LED White Hi/Low Bi-Xenon HID Headlight Motorcycle Light Bulb
    THIS KIT IS DESIGNED FOR H4 CONVERSION HEADLIGHTS AND WILL NOT WORK IN SEALED BEAM HEADLIGHTS.Please make sure your headlights accept H4 or 9003 Bulbs before purchasing. These will only work with H4 or 9003 headlight housings.ONE - (1) LED BULBOctane Lighting GEN 5 All-In-One H4 LED Headlight Bulb: 4,500/3,600 Lumen Bulb 4,500 / 3,600 LUMENS! The first LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 5 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 5 LED conversion kits as bright as an HID system, but dont require all the extra wiring, relays, or ballasts of HID kits. Simply plug these in, same as a halogen bulb. The GEN 5 LED conversion kits from Octane Lighting have the canbus driver built into the wiring on the bulb, which means there are no external relays to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 5 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 3,600 Lumens of light and produces 4,500 Lumens of light on high beam setting and draws 40 watts of energy. LED LIGHT BULBSpecifications and Features: 3,600 Lumens Low Beam / 4,500 Lumens High Beam Light Output Per Bulb40 Watts Energy Usage Per BulbLED Light Color 6,000K - Daylight Pure White ColorWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for coolingCOB LEDSAll-In-One Design. Canbus Error Free BallastLED Protection Circuit to protect from reverse polarity, low voltage or high voltage spikes. Smart and Efficient Cooling System uses Built-In Cooling Fan. Greater Visibility - 3 times brighter than factory halogen bulbs.Total Consumption 40W per bulbHigh luminous efficacy Flux: 4,500/3,600lm.High quality Aluminum heat sink ensures proper temperature regulation.Lower Power Consumption than Halogen bulb.Vibration proof design.30,000 Hour LifespanEasy installation, Plug and Play, No modification requiredTHIS KIT IS DESIGNED FOR H4 CONVERSION HEADLIGHTS AND WILL NOT WORK IN SEALED BEAM HEADLIGHTS.
    Not rated yet
    • $44.95
  • 6K 4000Lm H4 LED White Hi/Low Bi-Xenon HID Headlight Motorcycle Light Bulb
    THIS KIT IS DESIGNED FOR H4 CONVERSION HEADLIGHTS AND WILL NOT WORK IN SEALED BEAM HEADLIGHTS.Please make sure your headlights accept H4 or 9003 Bulbs before purchasing. These will only work with H4 or 9003 headlight housings.ONE - (1) LED BULBOctane Lighting GEN 5 All-In-One H4 LED Headlight Bulb: 4,500/3,600 Lumen Bulb 4,500 / 3,600 LUMENS! The first LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 5 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 5 LED conversion kits as bright as an HID system, but dont require all the extra wiring, relays, or ballasts of HID kits. Simply plug these in, same as a halogen bulb. The GEN 5 LED conversion kits from Octane Lighting have the canbus driver built into the wiring on the bulb, which means there are no external relays to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 5 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 3,600 Lumens of light and produces 4,500 Lumens of light on high beam setting and draws 40 watts of energy. LED LIGHT BULBSpecifications and Features: 3,600 Lumens Low Beam / 4,500 Lumens High Beam Light Output Per Bulb40 Watts Energy Usage Per BulbLED Light Color 6,000K - Daylight Pure White ColorWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for coolingCOB LEDSAll-In-One Design. Canbus Error Free BallastLED Protection Circuit to protect from reverse polarity, low voltage or high voltage spikes. Smart and Efficient Cooling System uses Built-In Cooling Fan. Greater Visibility - 3 times brighter than factory halogen bulbs.Total Consumption 40W per bulbHigh luminous efficacy Flux: 4,500/3,600lm.High quality Aluminum heat sink ensures proper temperature regulation.Lower Power Consumption than Halogen bulb.Vibration proof design.30,000 Hour LifespanEasy installation, Plug and Play, No modification requiredTHIS KIT IS DESIGNED FOR H4 CONVERSION HEADLIGHTS AND WILL NOT WORK IN SEALED BEAM HEADLIGHTS.
    Not rated yet
    • $44.95
  • 6K 4000Lm H4 LED White Hi/Low Bi-Xenon HID Headlight Motorcycle Light Bulb
    THIS KIT IS DESIGNED FOR H4 CONVERSION HEADLIGHTS AND WILL NOT WORK IN SEALED BEAM HEADLIGHTS.Please make sure your headlights accept H4 or 9003 Bulbs before purchasing. These will only work with H4 or 9003 headlight housings.ONE - (1) LED BULBOctane Lighting GEN 5 All-In-One H4 LED Headlight Bulb: 4,500/3,600 Lumen Bulb 4,500 / 3,600 LUMENS! The first LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 5 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 5 LED conversion kits as bright as an HID system, but dont require all the extra wiring, relays, or ballasts of HID kits. Simply plug these in, same as a halogen bulb. The GEN 5 LED conversion kits from Octane Lighting have the canbus driver built into the wiring on the bulb, which means there are no external relays to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 5 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 3,600 Lumens of light and produces 4,500 Lumens of light on high beam setting and draws 40 watts of energy. LED LIGHT BULBSpecifications and Features: 3,600 Lumens Low Beam / 4,500 Lumens High Beam Light Output Per Bulb40 Watts Energy Usage Per BulbLED Light Color 6,000K - Daylight Pure White ColorWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for coolingCOB LEDSAll-In-One Design. Canbus Error Free BallastLED Protection Circuit to protect from reverse polarity, low voltage or high voltage spikes. Smart and Efficient Cooling System uses Built-In Cooling Fan. Greater Visibility - 3 times brighter than factory halogen bulbs.Total Consumption 40W per bulbHigh luminous efficacy Flux: 4,500/3,600lm.High quality Aluminum heat sink ensures proper temperature regulation.Lower Power Consumption than Halogen bulb.Vibration proof design.30,000 Hour LifespanEasy installation, Plug and Play, No modification requiredTHIS KIT IS DESIGNED FOR H4 CONVERSION HEADLIGHTS AND WILL NOT WORK IN SEALED BEAM HEADLIGHTS.
    Not rated yet
    • $44.95
  • 6K 4000Lm H4 LED White Hi/Low Bi-Xenon HID Headlight Motorcycle Light Bulb
    THIS KIT IS DESIGNED FOR H4 CONVERSION HEADLIGHTS AND WILL NOT WORK IN SEALED BEAM HEADLIGHTS.Please make sure your headlights accept H4 or 9003 Bulbs before purchasing. These will only work with H4 or 9003 headlight housings.ONE - (1) LED BULBOctane Lighting GEN 5 All-In-One H4 LED Headlight Bulb: 4,500/3,600 Lumen Bulb 4,500 / 3,600 LUMENS! The first LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 5 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 5 LED conversion kits as bright as an HID system, but dont require all the extra wiring, relays, or ballasts of HID kits. Simply plug these in, same as a halogen bulb. The GEN 5 LED conversion kits from Octane Lighting have the canbus driver built into the wiring on the bulb, which means there are no external relays to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 5 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 3,600 Lumens of light and produces 4,500 Lumens of light on high beam setting and draws 40 watts of energy. LED LIGHT BULBSpecifications and Features: 3,600 Lumens Low Beam / 4,500 Lumens High Beam Light Output Per Bulb40 Watts Energy Usage Per BulbLED Light Color 6,000K - Daylight Pure White ColorWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for coolingCOB LEDSAll-In-One Design. Canbus Error Free BallastLED Protection Circuit to protect from reverse polarity, low voltage or high voltage spikes. Smart and Efficient Cooling System uses Built-In Cooling Fan. Greater Visibility - 3 times brighter than factory halogen bulbs.Total Consumption 40W per bulbHigh luminous efficacy Flux: 4,500/3,600lm.High quality Aluminum heat sink ensures proper temperature regulation.Lower Power Consumption than Halogen bulb.Vibration proof design.30,000 Hour LifespanEasy installation, Plug and Play, No modification requiredTHIS KIT IS DESIGNED FOR H4 CONVERSION HEADLIGHTS AND WILL NOT WORK IN SEALED BEAM HEADLIGHTS.
    Not rated yet
    • $44.95
  • 7" Motorcycle Black Chrome Black Octane HID LED Light Bulb H4 Headlight Harley
    OCTANE LIGHTING 7" BLACK / CHROME LED HEADLIGHT LAMP FOR HARLEY AND OTHER MOTORCYCLE MODELS THIS IS A 7 INCH IN OVERALL DIAMETER HEADLIGHT, PLEASE MEASURE YOUR HEADLIGHT BEFORE BUYING, THE COMPATIBILITY CHART IS ONLY FOR REFERENCE. HEADLIGHTS BUCKETS ARE A VERY COMMON PART CHANGED ON MOTORCYCLES AND YOUR BIKE COULD HAVE A DIFFERENT SIZE ON IT.  THIS IS A LED HEADLIGHT WITH A HIGH INTENSITY BRIGHT WHITE LEDS!THE PICTURE DOES NOT DO IT JUSTICE - THESE ARE MUCH BRIGHTER IN PERSONHEADLIGHT IS VERY BRIGHT DAY OR NIGHT! (One) 7 Inch Round LED Headlight (High/Low) This Octane Lighting LED light has low beam, high beam. Will fit many vehicles and motorcycles with the standard 7" round headlight. These headlights are sealed to prevent moisture and water build-up. Product Features and Benefits Excellent option for light, medium and heavy-duty trucks, off-road vehicles, classic cars, motorcycles and more. Metalized reflector optics provide a lighting experience that smooth and clean across the driving surface Provides a brighter, crisper and whiter light output, closer to the color temperature of daylight, dramatically improving light projection distance and overall visibility Durability and dependability of LED lighting provides a solid-state, bulb-free headlamp design that impervious to damage from shock and vibration Military grade, die-cast aluminum housing and non-yellowing, polycarbonate lens offer optimum protection against damage from impact, roadside debris and other hazards Electronics are sealed in epoxy to resist from damage caused by corrosion or moisture Advanced circuitry protects against voltage spikes up to 600v Drop-in replacement for #6014, 6015, 6016, H6024 and Par 56 headlamp designs Uses standard, H4, 3-blade wiring connector   Material: Hard-coated polycarbonate lens eCoat aluminum housing and internal structures Metalized Reflector 16 Gauge Wire   Light Source: 2 LED Arrays 9v-33v Multi-volt design works with both12v and 24v systems   Designed At: 12.8v, 1.80a (low beam), 3.60 amps (high beam) 25.6v, 1.00a (low beam), 1.80 amps (high beam)   Additional Specifications: Some new models may require an adapter plug (H4 LED Headlight Adapter Wire Plug for Harley Touring Models 2014 2015) THIS LISTING IS FOR ONE 7 INCH ROUND 12 VOLT HIGH/LOW BEAM LED MOTORCYCLE HEADLIGHT - SUPER BRIGHT 6000K LEDS. THESE ARE EXTREMELY BRIGHT AND LIGHT UP WHITE COMPARED THE STANDARD STOCK YELLOW LIGHT HEADLIGHT BULBS. MODIFICATION TO BUCKET OR BRACKETS MAY BE REQUIRED. WE WILL TAKE EXTRA CARE IN PACKAGING.
    Not rated yet
    • $39.95
    Backorder available
  • Motorcycle H4 Halogen Headlight Headlamp Replacement Bulbs 12V Clear 80/100W Pr
     NEW PAIR OF H4 HALOGEN 80W/100W CLEAR REPLACEMENT HEADLIGHT BULBS FOR MOTORCYCLES.
    Not rated yet
    • $13.95
  • 6K 4000Lm H4 COB HID SMD LED White Headlight Motorcycle Light Bulb : Harley
    THIS KIT IS DESIGNED FOR H4 CONVERSION HEADLIGHTS AND WILL NOT WORK IN SEALED BEAM HEADLIGHTS.ONE - (1) LED BULB - Replaces Stock Harley Davidson Motorcycle H4/9003 Light BulbOctane Lighting GEN 5 All-In-One H4 LED Headlight Bulb: 3,600/4,000 Lumen Bulb 4,000 High Beam / 3,600 Low Beam LUMENS! The first LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 5 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 5 LED conversion kits as bright as an HID system, but the new design from Octane Lighting features an internal canbus driver. The GEN 5 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 5 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 3,600 Lumens of light on the low beam setting; but produces 4,000 Lumens of light on high beam and draws 40 watts of energy. LED LIGHT BULBSpecifications and Features: 3,600 Lumens Low Beam / 4,500 Lumens High Beam Light Output Per Bulb40 Watts Energy Usage Per BulbLED Light Color 6,000K - Daylight Pure White ColorWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for coolingCOB LEDSAll-In-One Design - High & Low Beam Canbus Ballast (Error Free)LED Protection Circuit to protect from reverse polarity, low voltage or high voltage spikes. Smart and Efficient Cooling System uses Built-In Cooling Fan. Greater Visibility - 3 times brighter than factory halogen bulbs.Total Consumption 40W per bulbHigh luminous efficacy Flux: 4,000/3,600lm.High quality Aluminum heat sink ensures proper temperature regulation.Lower Power Consumption than Halogen bulb.Vibration proof design.30,000 Hour LifespanEasy installation, Plug and Play, No modification requiredTHIS KIT IS DESIGNED FOR H4 CONVERSION HEADLIGHTS AND WILL NOT WORK IN SEALED BEAM HEADLIGHTS.
    Not rated yet
    • $44.95
Products: 112 of 15
  • LOW BEAM 5-3/4" Stock H4 Halogen Light Bulb Headlight SW 60W Headlamp Each
    THIS IS FOR ONE HEADLIGHTTHESE ARE HALOGEN SEMI-SEALED BEAM STOCK STYLE GLASS FACED HEADLIGHTS WITH METAL BACKSIDE!H4 BULB IS REMOVABLE AND REPLACEABLE REPLACEABLE SUPER WHITE 55/60W HALOGEN H4 BULB INCLUDED! SINGLE (1-HEADLIGHT W/ BULB) THIS LISTING IS FOR ONE NEW 5-3/4" STOCK STYLE GLASS FACED HALOGEN H4 CONVERSION HEADLIGHT BULB. THESE HALOGEN SEMI-SEALED BEAM HEADLIGHTS LOOK ALMOST THE SAME AS THE ORIGINAL HEADLIGHTS YOUR VEHICLE CAME WITH WHEN IT WAS NEW, EXCEPT THESE LIGHT UP 50% BRIGHTER THEN THE STOCK STYLE INCANDESCENT BULBS AND TAKE A REPLACEABLE 60/55W SUPER WHITE H4 BULBS. THESE HAVE THE ORIGINAL SHAPED PRONGS ON THE BACK SO THEY WILL PLUG RIGHT INTO YOUR ORIGINAL WIRING HARNESS PLUGS. THESE ARE CORRECT FOR ANY CAR OR TRUCK THAT HAS 4 ROUND GLASS HEADLIGHTS. EACH BULB IS 5 3/4 INCHES IN DIAMETER. DOT SAE APPROVED.
    Not rated yet
    • $20.95
  • Jeep 2018 Hood Bracket Kit Diode Dynamics
    Perfect fitment. The Hood LED Light Bar Kit for the 2020 Jeep Gladiator from Diode Dynamics allows you to easily mount a 50 Inch light bar across the hood. These application-specific brackets were CAD-designed to install using factory mounting points. No cutting or drilling required! When installed along with our fully-customizable Gladiator Cowl Mount Brackets, you can easily mount multiple pods on either side of the 50 Inch light bar as well.Low profile. These L-shaped brackets were designed in-house specifically for our Stage Series light bar. They were designed to be low profile and won't block visibility while driving or block the wiper nozzles. This also means you won't hear whistling or major wind noise like you may have experienced with other light bar brackets.Not your average hardware. The hardware included with this kit is OEM-style, automotive grade hardware. This hardware isn't from the hardware store - it was custom designed for this kit with integrated washers and the same OEM finish as the factory hardware. The Delrin spacers are long-lasting and won't wear over time.Control through aux switch bank. Included with the full light bar kit is our new OEM Auxiliary Switch Dual-Output Wiring Harness. This harness allows you to control your auxiliary lighting using the factory-installed aux switch bank. For those who don't have the aux switch bank, our Heavy Duty Dual-Output Wiring Harness is also included to mount a switch and connect directly to the battery.Designed for performance. You may think that you'll get lots of glare from light bouncing off the hood. However, thanks to custom-engineering TIR optics, Diode Dynamics Stage Series LED light bars shine light in a highly-functional and useful beam pattern, much more focused than older LEDs on the market. The Driving optic easily shines right over the hood, even with the low mounting position.Functional Patterns. All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you!The Driving pattern was designed to supplement your high beams. Rather than a simple spot pattern, the Stage Series Driving pattern has a rectangular 20Wx8H degree pattern that is far more useful for directing light downrange at high speeds.The Flood pattern was designed to provide uniform, even illumination and a full 80Wx50H degree spread of light. Unlike generic flood light optics that are simply a heavily diffused spot, our flood optic is a true optically designed spread, resulting in the biggest spread in the industry! It is perfect for lighting up anything at low speeds, a backup or reverse light, or to light up a worksite.The Combo pattern combines both the Driving and Flood optics. It shines light downrange in a focused, rectangular 20Wx8H degree pattern while also illuminating area around it in a full 80Wx50H degree spread. The Stage Series 50 Inch Combo Light Bar features six driving lenses in the middle with two flood lenses on the outer edges.Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.FeaturesCAD-designed for perfect fitment on 2020 Jeep GladiatorAllows you to mount one 50 Inch light bar across the hoodDesigned to eliminate excess wind noiseIncludes OEM-style automotive grade hardware designed specifically for this kitUtilizes existing mounting points for easy installation - no cutting or drilling requiredHighly durable powdercoated steel constructionControl through factory aux switch bank using the included harnessWhat's Included In the Box:Brackets Only:Two (2) Application-specific hood bracketsFour (4) Delrin spacersFour (4) OEM-style automotive grade boltsInstallation GuideQuantity: Pair (Left and Right Side)Warranty: 3 year warranty100 percent Satisfaction GuaranteeFitmentThis kit is compatible with all Sport, Sport S, Overland, and Rubicon trim levelsMake: JeepModel: GladiatorYears: 2020Electrical Compatibility: No electrical issues (tested and confirmed)
    Not rated yet
    • $40.00
    Out of stock
  • Jeep JL 2018-2019 Stage Series 6 Inch Cowl LED Kit White Driving Diode Dynamics
    Perfect fitment. The Cowl Mount LED Light Bar Kit for the 2018-2019 Jeep Wrangler from Diode Dynamics allows you to easily mount just about any auxiliary lighting you can think of. These application-specific brackets were CAD-designed to install using factory mounting points. No cutting or drilling required! They also feature a low profile design, which eliminates excess whistling or major wind noise.Endless mounting options. These brackets were designed with a variety of different mounting points for endless mounting options. You can mount multiple pods, a larger worklight, or even a small light bar to achieve the look you're after! There are even slots on the side of the bracket to mount ditch lights. When standard pods are installed on the outer slot, you can fold the windshield down without removing your auxiliary lighting. When installed along with our JL Wrangler Hood Light Bar Kit, you can easily mount a 50 Inch Stage Series light bar across the hood as well.Not your average hardware. The hardware included with this kit is OEM-style, automotive grade hardware. This hardware isn't from the hardware store - it was custom designed for this kit with integrated washers and the same OEM finish as the factory hardware. The Delrin spacers are long-lasting and won't wear over time.Control through aux switch bank. Included with the full light bar kit is our new OEM Auxiliary Switch Dual-Output Wiring Harness. This harness allows you to control your auxiliary lighting using the factory-installed aux switch bank. For those who don't have the aux switch bank, our Light Duty Dual-Output Wiring Harness is also included to mount a switch and connect directly to the battery.Designed for performance. Using optical simulation modeling, Diode Dynamics Stage Series LED light bars have been designed for maximum functionality, with compact size, custom-engineered TIR optics, and a useful beam pattern, all in a highly durable package. Our light bars shine light in a highly-functional and useful beam pattern, much more focused than older LEDs on the market.Functional Patterns. All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you!The Driving pattern was designed to supplement your high beams. Rather than a simple spot pattern, the Stage Series Driving pattern has a rectangular 20Wx8H degree pattern that is far more useful for directing light downrange at high speeds.The Flood pattern was designed to provide uniform, even illumination and a full 80Wx50H degree spread of light. Unlike generic flood light optics that are simply a heavily diffused spot, our flood optic is a true optically designed spread, resulting in the biggest spread in the industry! It is perfect for lighting up anything at low speeds, a backup or reverse light, or to light up a worksite.Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.FeaturesJeep 2018-2019 SS6 Cowl LED Kit White DrivingCAD-designed for perfect fitment on 2018 and Up Jeep JL WranglerFeatures multiple mounting points for endless mounting optionsCompatible with any pod, worklight, or small light barWhen a set of standard pods is mounted on the outer slot, they allow you to still fold down the windshieldIncludes OEM-style automotive grade hardware designed specifically for this kitUtilizes existing mounting points for easy installation - no cutting or drilling requiredHighly durable powdercoated steel constructionWhat's Included In the Box:Cowl Mount Bracket Light Bar Kit:Two (2) Application-specific cowl mount brackets for installation on 2018-2019 Jeep WranglerTwo (2) U-bracketsTwo (2) SS6 Stage Series 6 Inch Light BarsOne (1) OEM Auxillary Switch Dual-Output HarnessOne (1) Light Duty Dual-Output HarnessSix (6) Delrin spacersSix (6) OEM-style automotive grade boltsInstallation GuideQuantity: Pair (Left and Right Side)Warranty: 3 year warrantyReturn Policy: 30-day Return with no restocking fee100 percent Satisfaction GuaranteeFitmentThis kit is compatible with all Sport, Sport S, Sahara, and Rubicon trim levelsMake: JeepModel: WranglerYears: 2018, 2019Electrical Compatibility: No electrical issues (tested and confirmed)SpecificationsIntensity at 10m: 470 lux (Driving)Raw Output: 2280 lumensMeasured Lumens: 1400Intensity (cd): 47,000Color Temp (CCT): 2000K, 6000KBeam Angle: Driving, 20 Degree x8 Degree, Flood, 80 Degree x50 DegreePower (watts): 26.6Operating Voltage: 9-16VCurrent (amps at 13.2V): 1.9Bracket Thickness: 10 gaPolarity: Polarity SpecificOperating Temperature: -40C to 85C (-40F to 185F)LED Emitter: Luxeon Z ESConnector(s): Deutsch DT InputMaterials: Aluminum PCB, Polycarbonate Lens, Aluminum HeatsinkCooling: Passive, heatsinkIntrusion Ratings: IP68 Waterproof
    Not rated yet
    • $320.00
    Out of stock
  • Jeep JL 2018-2019 Stage Series 6 Inch Cowl LED Kit White Flood Diode Dynamics
    Perfect fitment. The Cowl Mount LED Light Bar Kit for the 2018-2019 Jeep Wrangler from Diode Dynamics allows you to easily mount just about any auxiliary lighting you can think of. These application-specific brackets were CAD-designed to install using factory mounting points. No cutting or drilling required! They also feature a low profile design, which eliminates excess whistling or major wind noise.Endless mounting options. These brackets were designed with a variety of different mounting points for endless mounting options. You can mount multiple pods, a larger worklight, or even a small light bar to achieve the look you're after! There are even slots on the side of the bracket to mount ditch lights. When standard pods are installed on the outer slot, you can fold the windshield down without removing your auxiliary lighting. When installed along with our JL Wrangler Hood Light Bar Kit, you can easily mount a 50 Inch Stage Series light bar across the hood as well.Not your average hardware. The hardware included with this kit is OEM-style, automotive grade hardware. This hardware isn't from the hardware store - it was custom designed for this kit with integrated washers and the same OEM finish as the factory hardware. The Delrin spacers are long-lasting and won't wear over time.Control through aux switch bank. Included with the full light bar kit is our new OEM Auxiliary Switch Dual-Output Wiring Harness. This harness allows you to control your auxiliary lighting using the factory-installed aux switch bank. For those who don't have the aux switch bank, our Light Duty Dual-Output Wiring Harness is also included to mount a switch and connect directly to the battery.Designed for performance. Using optical simulation modeling, Diode Dynamics Stage Series LED light bars have been designed for maximum functionality, with compact size, custom-engineered TIR optics, and a useful beam pattern, all in a highly durable package. Our light bars shine light in a highly-functional and useful beam pattern, much more focused than older LEDs on the market.Functional Patterns. All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you!The Driving pattern was designed to supplement your high beams. Rather than a simple spot pattern, the Stage Series Driving pattern has a rectangular 20Wx8H degree pattern that is far more useful for directing light downrange at high speeds.The Flood pattern was designed to provide uniform, even illumination and a full 80Wx50H degree spread of light. Unlike generic flood light optics that are simply a heavily diffused spot, our flood optic is a true optically designed spread, resulting in the biggest spread in the industry! It is perfect for lighting up anything at low speeds, a backup or reverse light, or to light up a worksite.Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.FeaturesJeep 2018-2019 SS6 Cowl LED Kit White FloodCAD-designed for perfect fitment on 2018 and Up Jeep JL WranglerFeatures multiple mounting points for endless mounting optionsCompatible with any pod, worklight, or small light barWhen a set of standard pods is mounted on the outer slot, they allow you to still fold down the windshieldIncludes OEM-style automotive grade hardware designed specifically for this kitUtilizes existing mounting points for easy installation - no cutting or drilling requiredHighly durable powdercoated steel constructionWhat's Included In the Box:Cowl Mount Bracket Light Bar Kit:Two (2) Application-specific cowl mount brackets for installation on 2018-2019 Jeep WranglerTwo (2) U-bracketsTwo (2) SS6 Stage Series 6 Inch Light BarsOne (1) OEM Auxillary Switch Dual-Output HarnessOne (1) Light Duty Dual-Output HarnessSix (6) Delrin spacersSix (6) OEM-style automotive grade boltsInstallation GuideQuantity: Pair (Left and Right Side)Warranty: 3 year warrantyReturn Policy: 30-day Return with no restocking fee100 percent Satisfaction GuaranteeFitmentThis kit is compatible with all Sport, Sport S, Sahara, and Rubicon trim levelsMake: JeepModel: WranglerYears: 2018, 2019Electrical Compatibility: No electrical issues (tested and confirmed)SpecificationsIntensity at 10m: 470 lux (Driving)Raw Output: 2280 lumensMeasured Lumens: 1400Intensity (cd): 47,000Color Temp (CCT): 2000K, 6000KBeam Angle: Driving, 20 Degree x8 Degree, Flood, 80 Degree x50 DegreePower (watts): 26.6Operating Voltage: 9-16VCurrent (amps at 13.2V): 1.9Bracket Thickness: 10 gaPolarity: Polarity SpecificOperating Temperature: -40C to 85C (-40F to 185F)LED Emitter: Luxeon Z ESConnector(s): Deutsch DT InputMaterials: Aluminum PCB, Polycarbonate Lens, Aluminum HeatsinkCooling: Passive, heatsinkIntrusion Ratings: IP68 Waterproof
    Not rated yet
    • $320.00
    Out of stock
  • 6500k H4 SMD COB 360° LED White Motorcycle Headlight HID Hi/Low Light Bulb
    ONE - (1) LED BULB Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,500 Lumen Bulbs 2,500 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,000 Lumens of light and draws 18 watts of energy on the low beam setting; but produces 2,500 Lumens of light and draws 24 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,000 Lumens Low Beam / 2,500 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle18 Watts Low Beam / 24 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for cooling LED Chips per bulbAll-In-One Design. No Ballast or Driver Required: Newest TechnologyLED Protection Circuit to protect from reverse polarity, low voltage or high voltage spikes. Smart and Efficient Cooling System uses Built-In Cooling Fan. Greater Visibility - 3 times brighter than factory halogen bulbs.High luminous efficacy Flux: 2,500/2,000lm.High quality Aluminum heat sink ensures proper temperature regulation.Lower Power Consumption than Halogen bulb.Vibration proof design.30,000 Hour LifespanEasy installation, Plug and Play, No modification requiredNo Splicing of harnesses required for LED bulbsUses 75% less power than Halogen or HID bulbs3 times brighter than stock halogen bulbsOBC Error free operationDramatically improves visibility at night THIS KIT IS DESIGNED FOR H4 CONVERSION HEADLIGHTS AND WILL NOT WORK IN SEALED BEAM HEADLIGHTS.
    Not rated yet
    • $44.95
  • 6500k H4 SMD COB 360° LED White Motorcycle Headlight HID Hi/Low Light Bulb
    ONE - (1) LED BULB Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,500 Lumen Bulbs 2,500 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,000 Lumens of light and draws 18 watts of energy on the low beam setting; but produces 2,500 Lumens of light and draws 24 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,000 Lumens Low Beam / 2,500 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle18 Watts Low Beam / 24 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for cooling LED Chips per bulbAll-In-One Design. No Ballast or Driver Required: Newest TechnologyLED Protection Circuit to protect from reverse polarity, low voltage or high voltage spikes. Smart and Efficient Cooling System uses Built-In Cooling Fan. Greater Visibility - 3 times brighter than factory halogen bulbs.High luminous efficacy Flux: 2,500/2,000lm.High quality Aluminum heat sink ensures proper temperature regulation.Lower Power Consumption than Halogen bulb.Vibration proof design.30,000 Hour LifespanEasy installation, Plug and Play, No modification requiredNo Splicing of harnesses required for LED bulbsUses 75% less power than Halogen or HID bulbs3 times brighter than stock halogen bulbsOBC Error free operationDramatically improves visibility at night THIS KIT IS DESIGNED FOR H4 CONVERSION HEADLIGHTS AND WILL NOT WORK IN SEALED BEAM HEADLIGHTS.
    Not rated yet
    • $44.95
  • 6K 6500K H4 SMD COB 360° LED White Headlight HID Hi/Low Light Bulb Kit Set of 4
    ( These will only work with H4 style headlights and will not work with sealed beam headlights ) 6K 6500K H4 SMD COB 360° LED White Headlight HID Hi/Low Light Bulb - Set of 4Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs Kit: 2,500 Lumen Bulbs 2,500 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,000 Lumens of light and draws 18 watts of energy on the low beam setting; but produces 2,500 Lumens of light and draws 24 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,000 Lumens Low Beam / 2,500 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle18 Watts Low Beam / 24 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for CoolingNewest Technology All-In-One Design: No Ballast or Driver RequiredLED Protection Circuit to Protect from Reverse Polarity, Low Voltage or High Voltage SpikesSmart & Efficient Cooling System Uses Built-In Cooling FanGreater Visibility - 3x Brighter than Factory Halogen BulbsHigh Luminous Efficacy Flux: 2,500/2,000lmHigh Quality Aluminum Heat Sink Ensures Proper Temperature RegulationLower Power Consumption than Halogen BulbsVibration Proof Design30,000 Hour LifespanEasy Plug & Play Installation - No Modification RequiredNo Splicing of Harnesses Required for LED BulbsUses 75% LESS Power than Halogen or HID Bulbs3x Brighter than Stock Halogen BulbsOBC Error Free OperationDramatically Improves Visibility at Night
    Not rated yet
    • $119.95
  • 6K 4000Lm H4 LED White Hi/Low Bi-Xenon HID Headlight Motorcycle Light Bulb
    THIS KIT IS DESIGNED FOR H4 CONVERSION HEADLIGHTS AND WILL NOT WORK IN SEALED BEAM HEADLIGHTS.Please make sure your headlights accept H4 or 9003 Bulbs before purchasing. These will only work with H4 or 9003 headlight housings.ONE - (1) LED BULBOctane Lighting GEN 5 All-In-One H4 LED Headlight Bulb: 4,500/3,600 Lumen Bulb 4,500 / 3,600 LUMENS! The first LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 5 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 5 LED conversion kits as bright as an HID system, but dont require all the extra wiring, relays, or ballasts of HID kits. Simply plug these in, same as a halogen bulb. The GEN 5 LED conversion kits from Octane Lighting have the canbus driver built into the wiring on the bulb, which means there are no external relays to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 5 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 3,600 Lumens of light and produces 4,500 Lumens of light on high beam setting and draws 40 watts of energy. LED LIGHT BULBSpecifications and Features: 3,600 Lumens Low Beam / 4,500 Lumens High Beam Light Output Per Bulb40 Watts Energy Usage Per BulbLED Light Color 6,000K - Daylight Pure White ColorWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for coolingCOB LEDSAll-In-One Design. Canbus Error Free BallastLED Protection Circuit to protect from reverse polarity, low voltage or high voltage spikes. Smart and Efficient Cooling System uses Built-In Cooling Fan. Greater Visibility - 3 times brighter than factory halogen bulbs.Total Consumption 40W per bulbHigh luminous efficacy Flux: 4,500/3,600lm.High quality Aluminum heat sink ensures proper temperature regulation.Lower Power Consumption than Halogen bulb.Vibration proof design.30,000 Hour LifespanEasy installation, Plug and Play, No modification requiredTHIS KIT IS DESIGNED FOR H4 CONVERSION HEADLIGHTS AND WILL NOT WORK IN SEALED BEAM HEADLIGHTS.
    Not rated yet
    • $44.95