Headlight Components

Products: 112 of 58
  • Stainless "GUIDE" Headlight Signal Housing | Headlight Components
    Top Signal Light Housing for "GUIDE" Style Headlight Available in Stainless Steel
    Not rated yet
    • $23.08
  • Chrome "GUIDE" Headlight Signal Housing | Headlight Components
    Top Signal Light Housing for "GUIDE" Style Headlight Available in Chrome
    Not rated yet
    • $20.98
  • 5 LED "GUIDE" Top Mount - Amber LED/Clear Lens | Headlight Components
    5 LED Top Mount Light for "GUIDE" Style Headlight Amber LED w/ Clear Lens, Epoxy Sealed Only Fits United Pacific Headlight Bezel with Top Mount Signal1156 Plug (Hard Wired)
    Not rated yet
    • $10.28
  • 5 LED Dual Function "GUIDE" Headlight Signal - Amber LED/Amber Lens | Headlight Components
    5 LED Signal Light Dual Function Top Mount Light for "GUIDE" Style Headlight 5 Amber LED w/ Amber Lens Hard Wired with 1157 Plug
    Not rated yet
    • $12.34
  • 5 LED Dual Function "GUIDE" Top Mount - Amber LED/Clear Lens | Headlight Components
    5 LED Dual Function Top Mount Light for "GUIDE" Headlight Amber LED w/ Clear Lens Hard Wired with 1157 Plug
    Not rated yet
    • $12.34
  • Hiboy Headlight Stand Set | Wheel Covers
    Cast Polished Stainless Steel Stainless Mounting Bolts with Smooth Polished Head Mounting Pads with Edge Bead Detail Universal Fit
    Not rated yet
    • $102.00
  • D2S Bulb Adapter Pair Diode Dynamics
    These are accessory cables needed to connect D2S bulbs to a standard HID ballast output, for custom HID installations. Priced per pair.Your order includes: 2 Precision HID D2S Adapter Cables What's Included Quantity: Two (2) Warranty: 3 year warranty 100 percent Satisfaction Guarantee
    Not rated yet
    • $0.00
    Out of stock
  • HYLUX D2 HID Ballast Diode Dynamics
    These are D2-connector 2A88 CANBUS 35 watt HID ballasts, from HYLuxTEK. With true OEM-grade manufacturing, these ballasts are intended to perform for years, with absolutely zero failures. If you have a D2 OEM HID setup with a failed ballast, you can purchase one of these to get back up and running at a fraction of the cost of a new ballast from the dealer. You'll simply need to tap the positive and negative input wires into the power wires powering your original ballast. This ballast should be used with D2 bulbs only (D2S, D2R, D2C, etc). If you have a D1 bulb, or a standard aftermarket AMP HID size such as 9006, H1, or H11, please use our AMP or D1 ballast instead. Most ballasts these days run with digital signal processing (DSP). This allows for a much smoother and more reliable power output, faster warmup, and longer bulb life. However, most digital ballasts still use standardized computing chips to process the information. It is very cost-efficient to use standard chips off the shelf. Instead, the HYLux uses a computing chip designed specifically for the purpose of running an HID bulb. This is known as an application-specific integrated circuit (ASIC). While this is much more expensive than a generic chip, it allows the HYLux ballast to operate with extremely high efficiency and performance, far exceeding that of any generic ballast on the market. The ballast is fully sealed in electrically-safe sealant material, known in the industry as potting. It's not just coated like cheaper ballasts, instead, it is filled to the brim, making the ballast completely waterproof and shockproof. The ballast will make a humming noise during operation- most assume this is bad, but actually, it is primarily a result of microscopic air pockets resonating inside, audible proof that the ballast is completely airtight.With the OEM-grade 23kV igniter, which is also fully waterproof, this ballast will strike the bulb perfectly, every single time. It will function in even the coldest of environments, with a rated minimum operating temperature of -40 degrees.This ballast has a CANBUS module, which is designed to provide extra resistance to the vehicle. This is required for operation in many newer vehicles, as they may otherwise shut off power to your headlights, due to the lower power consumption. The CANBUS module also regualtes the power input, to prevent errors with PWM signals. What is that? Well, many newer vehicles use pulse-width-modulation (PWM) to drive headlights, which basically flickers standard halogen bulbs on and off very quickly, to extend bulb life and lower power consumption. It works great for traditional filament bulbs, but HIDs require constant power to run reliably. The CANBUS module smooths the input signal into a constant power supply to the ballast. It has been tested and is effective with PWM signals up to 100hZ, which is within range of PWM systems in most US-market vehicles, such as Dodge, VW, BMW, etc. We recommend using high-quality aftermarket bulbs with this ballast, such as CNLight, or an OEM-grade bulb such as Philips or OSRAM. However, if you have any random, cheap bulb that is in working condition, this ballast will drive it perfectly.Your order includes: 1 HYLux 2A88 CANBUS HID Ballast with sturdy D2 terminal Diode Dynamics 3-Year Warranty
    Not rated yet
    • $0.00
    Out of stock
  • HYLUX D1 Ballast Diode Dynamics
    This is a D1 compatible 35 watt HID ballast, from HYLuxTEK. With true OEM-grade manufacturing, these ballasts are intended to perform for years, with absolutely zero failures. If you have a D1 OEM HID setup with a failed ballast, you can purchase one of these to get back up and running at a fraction of the cost of a new ballast from the dealer. Check your factory wires, you might not even need to do any wiring! The input and output connections on this ballast are D1 standard. However, if yours is different, just add the D1 input and output wires to your order. The input wire comes with a pigtail, so you can simply tap the positive and negative input wires into the wires that powered your original ballast. This ballast should be used with D1 bulbs only (D1S, D1R, etc). If you have a D2 bulb, or a standard aftermarket AMP HID size such as 9006, H1, or H11, please use our AMP or D2 ballast instead. We recommend using high-quality D1 aftermarket bulbs with this ballast, or OEM-grade bulbs such as Philips or OSRAM. For D1 size, the igniter is built into the bulb, and some cheap bulbs may not perform well. If you have good bulbs, this ballast will work with them without any issue. If you're having a problem, and not sure if you need a ballast or bulb, just contact us, and we can help you figure it out! Most ballasts these days run with digital signal processing (DSP). This allows for a much smoother and more reliable power output, faster warmup, and longer bulb life. However, most digital ballasts still use standardized computing chips to process the information. It is very cost-efficient to use standard chips off the shelf. Instead, the HYLux uses a computing chip designed specifically for the purpose of running an HID bulb. This is known as an application-specific integrated circuit (ASIC). While this is much more expensive than a generic chip, it allows the HYLux ballast to operate with extremely high efficiency and performance, far exceeding that of any generic ballast on the market. The ballast is fully sealed in electrically-safe sealant material, known in the industry as potting. It's not just coated like cheaper ballasts, instead, it is filled to the brim, making the ballast completely waterproof and shockproof. The ballast will make a humming noise during operation- most assume this is bad, but actually, it is primarily a result of microscopic air pockets resonating inside, audible proof that the ballast is completely airtight.Your order includes: 1 HYLux D1 HID Ballast Weatherproof D1 Power Input and Output Wires (optional) Diode Dynamics 3-Year Warranty
    Not rated yet
    • $0.00
    Out of stock
  • Butyl Headlamp Sealant Case of 20 Diode Dynamics
    Easy to work with. Properly reseal any headlamp or tail lamp and protect against moisture ingress with Diode Dynamics Butyl Headlight Sealant! This new and improved sealant rope was designed specifically for headlamps, with a firmer composition than auto-store windshield glue. This makes it easy to work with, without causing a sticky mess. Each roll comes with 20 feet of butyl, enough to reseal two large headlamps. Protection from moisture. Use it to reseal any headlamp after installing Diode Dynamics LED products! Warm it up a bit, place it into the headlight channel, and clamp together while heating, making sure the lens is fastened to the housing. With a little practice, you'll have a factory-quality seal, with quality butyl that will protect against moisture ingress for years to come. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.Features Butyl Headlamp Sealant (case of 20) Automotive grade butyl sealant Easy to work with, no sticky mess Standard black color 20 feet long (enough to reseal two large headlamps) 7mm diameter, designed to fit directly in headlamp channels What's Included Quantity: One (1) Warranty: 3 year warranty Return Policy: 30-day Return with no restocking fee 100 percent Satisfaction Guarantee Fitment Used to reseal any headlamp or tail lamp Specifications Length: 20 feet Diameter: 7mm Color: Black Operating Temperature: No Weight (lb): 1.5250
    Not rated yet
    • $0.00
    Out of stock
  • Butyl Headlamp Sealant Single Diode Dynamics
    Easy to work with. Properly reseal any headlamp or tail lamp and protect against moisture ingress with Diode Dynamics Butyl Headlight Sealant! This new and improved sealant rope was designed specifically for headlamps, with a firmer composition than auto-store windshield glue. This makes it easy to work with, without causing a sticky mess. Each roll comes with 20 feet of butyl, enough to reseal two large headlamps. Protection from moisture. Use it to reseal any headlamp after installing Diode Dynamics LED products! Warm it up a bit, place it into the headlight channel, and clamp together while heating, making sure the lens is fastened to the housing. With a little practice, you'll have a factory-quality seal, with quality butyl that will protect against moisture ingress for years to come. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.Features Butyl Headlamp Sealant Single Automotive grade butyl sealant Easy to work with, no sticky mess Standard black color 20 feet long (enough to reseal two large headlamps) 7mm diameter, designed to fit directly in headlamp channels What's Included Quantity: One (1) Warranty: 3 year warranty Return Policy: 30-day Return with no restocking fee 100 percent Satisfaction Guarantee Fitment Used to reseal any headlamp or tail lamp Specifications Length: 20 feet Diameter: 7mm Color: Black Operating Temperature: No Weight (lb): 1.5250
    Not rated yet
    • $0.00
    Out of stock
  • Bixenon HID Adapter 9004 Pair Diode Dynamics
    When installing HIDs in a dual-filament application, the original factory power signal must be separated into main power for the ballast, and a high beam signal to trigger the bixenon bulb, switching from low beam to high beam. Normally, this is accomplished with a bixenon relay, which connects to the battery and runs to each headlight. However, these can be unreliable as the relay fails over time, and cumbersome to install. These bixenon adapters are a modern, reliable alternative to the traditional wire harness relay. They do not require extra wiring- it's just an adapter! Plug one side into your factory bulb socket, then plug the other side into your HID ballast and bixenon HID bulb. The adapter will power the ballast, and quickly change from low to high beam when you flip the switch in your vehicle. These adapters are fully encapsulated for maximum reliability, and are compatible with all 35W CAN-BUS HID ballasts. Select the size based on the input power signal - H4/9003, H13, 9004, or 9007. The output wires are standard 9006 power to plug into the ballast, and a rectangular 2-pin standard high beam solenoid connector. Included in your order is two adapters, one for each side of your HID kit. Please make sure to select the correct option for bulb size, corresponding to your headlight bulb size. All items are covered by Diode Dynamics 30 days satisfaction guarantee as well as Diode Dynamics 3-year limited warranty.What's Included Bixenon Adapter 9007 Pair Quantity: Two (2) Warranty: 3 year warranty 100 percent Satisfaction Guarantee
    Not rated yet