LED Light Bars

Products: 112 of 142
  • Motorsports Stage Series Kit 18 Inch Diode Dynamics
    Designed for racing. The Motorsports LED Light Bar Kit from Diode Dynamics allows you to mount up to four SS12 Stage Series 12 Inch Light Bars or SS18 Stage Series 18 Inch Light Bar on the hood of your vehicle. The whole kit includes everything needed for installation and uses stainless steel hardware for long lasting durability, including custom-made stainless rubber bumpers, which absorb vibration and prevent any damage to the hood. These purpose-built brackets were CAD-designed to provide the performance you need to Go Faster, and See Further. Fully customizable. With the modular design, you can adjust the setup and angling for your specific race conditions and preference. Each of the lightbars are adjustable in output angle and position, and you can also adjust the brackets themselves to align with the contour of your hood. The Stage Series lineup also allows you to swap out optics and amber or white colors, for any need. The light bar kit includes four Wide Clear lenses. A popular option is to aim the top bars straight ahead, and the lower bars angled more to the side. With the included lenses, you also have the option to convert the outer side of each bar to a Wide optic. This setup is common for a stage with a lot of R1s and L1s, and any off-camber turns, to fill in light where you need it. For the straights, we recommend keeping most of the bars in the Driving optic, which is a focused, but not pencil-beam pattern, to punch far ahead while not blowing out your vision with too much foreground light. Quick mounting for night stages. This kit utilizes Dzus sliding latch fasteners to mount the setup to your vehicle. These provide reliable, strong attachment, while still offering quick installation for night stages. You'll just need to install them to the hood with a few rivets, and you'll be able to throw your lightbars on within seconds during service. Designed For Performance. Designed from the start for competition racing, and more specifically night stage rally races, Diode Dynamics Stage Series light bars have been engineered for maximum functionality, with compact size, custom-engineered TIR optics, and a useful beam pattern, all in a highly durable package. Our light bars shine light in a highly-functional and useful beam pattern, much more focused than older LEDs on the market. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.Features: Motorsports Stage Series Kit 18 Inch Rally-designed light bar mounting solution Mount up to four 12 Inch or 18 Inch Stage Series light bars Fully customizable, adjust light bar angle and position Aligns to hood contour Quick release mounts for night stages with DZUS sliding lock fasteners Highly durable 12 gauge powdercoated steel construction What's Included In the Box: Full Light Bar Kit: Full bracket set Four (4) SS12 12 Inch or SS18 18 Inch Stage Series Light Bar One (1) heavy-duty single-output relay harness Two (2) DT splitters Four (4) SS Wide Clear Lenses Eight (8) 8-32 Inch Stainless Steel Hex Nuts Four (4) 8-32 Inch Stainless Steel Hex Screws Eight (8) Dzus 1500 Series Spacers Eight (8) M6 Custom-Designed Bumper Feet Twenty-four (24) M6 Stainless Steel Flange Bolts Twenty-four (24) M6 Stainless Steel Flange Nuts Installation Guide Specifications Bracket Thickness: 12 ga Materials: Polycarbonate Lens, Aluminum Heatsink, Powdercoated Steel
    • $1359.95
    10 left in stock. Backorder available
  • Motorsports Stage Series Kit 12 Inch Diode Dynamics
    Designed for racing. The Motorsports LED Light Bar Kit from Diode Dynamics allows you to mount up to four SS12 Stage Series 12 Inch Light Bars or SS18 Stage Series 18 Inch Light Bar on the hood of your vehicle. The whole kit includes everything needed for installation and uses stainless steel hardware for long lasting durability, including custom-made stainless rubber bumpers, which absorb vibration and prevent any damage to the hood. These purpose-built brackets were CAD-designed to provide the performance you need to Go Faster, and See Further. Fully customizable. With the modular design, you can adjust the setup and angling for your specific race conditions and preference. Each of the lightbars are adjustable in output angle and position, and you can also adjust the brackets themselves to align with the contour of your hood. The Stage Series lineup also allows you to swap out optics and amber or white colors, for any need. The light bar kit includes four Wide Clear lenses. A popular option is to aim the top bars straight ahead, and the lower bars angled more to the side. With the included lenses, you also have the option to convert the outer side of each bar to a Wide optic. This setup is common for a stage with a lot of R1s and L1s, and any off-camber turns, to fill in light where you need it. For the straights, we recommend keeping most of the bars in the Driving optic, which is a focused, but not pencil-beam pattern, to punch far ahead while not blowing out your vision with too much foreground light. Quick mounting for night stages. This kit utilizes Dzus sliding latch fasteners to mount the setup to your vehicle. These provide reliable, strong attachment, while still offering quick installation for night stages. You'll just need to install them to the hood with a few rivets, and you'll be able to throw your lightbars on within seconds during service. Designed For Performance. Designed from the start for competition racing, and more specifically night stage rally races, Diode Dynamics Stage Series light bars have been engineered for maximum functionality, with compact size, custom-engineered TIR optics, and a useful beam pattern, all in a highly durable package. Our light bars shine light in a highly-functional and useful beam pattern, much more focused than older LEDs on the market. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.Features: Motorsports Stage Series Kit 12 Inch Rally-designed light bar mounting solution Mount up to four 12 Inch or 18 Inch Stage Series light bars Fully customizable, adjust light bar angle and position Aligns to hood contour Quick release mounts for night stages with DZUS sliding lock fasteners Highly durable 12 gauge powdercoated steel construction What's Included In the Box: Full Light Bar Kit: Full bracket set Four (4) SS12 12 Inch or SS18 18 Inch Stage Series Light Bar One (1) heavy-duty single-output relay harness Two (2) DT splitters Four (4) SS Wide Clear Lenses Eight (8) 8-32 Inch Stainless Steel Hex Nuts Four (4) 8-32 Inch Stainless Steel Hex Screws Eight (8) Dzus 1500 Series Spacers Eight (8) M6 Custom-Designed Bumper Feet Twenty-four (24) M6 Stainless Steel Flange Bolts Twenty-four (24) M6 Stainless Steel Flange Nuts Installation Guide Specifications Bracket Thickness: 12 ga Materials: Polycarbonate Lens, Aluminum Heatsink, Powdercoated Steel
    • $1039.95
    10 left in stock. Backorder available
  • Jeep 2018 SS50 Hood LED Kit Amber Combo Diode Dynamics
    Perfect fitment. The Hood LED Light Bar Kit for the 2018-2019 Jeep Wrangler from Diode Dynamics allows you to easily mount a 50 Inch light bar across the hood. These application-specific brackets were CAD-designed to install using factory mounting points. No cutting or drilling required! When installed along with our fully-customizable JL Wrangler Cowl Mount Brackets, you can easily mount multiple pods on either side of the 50 Inch light bar as well.Low profile. These L-shaped brackets were designed in-house specifically for our Stage Series light bar. They were designed to be low profile and won't block visibility while driving or block the wiper nozzles. This also means you won't hear whistling or major wind noise like you may have experienced with other light bar brackets.Not your average hardware. The hardware included with this kit is OEM-style, automotive grade hardware. This hardware isn't from the hardware store - it was custom designed for this kit with integrated washers and the same OEM finish as the factory hardware. The Delrin spacers are long-lasting and won't wear over time.Control through aux switch bank. Included with the full light bar kit is our new OEM Auxiliary Switch Dual-Output Wiring Harness. This harness allows you to control your auxiliary lighting using the factory-installed aux switch bank. For those who don't have the aux switch bank, our Heavy Duty Dual-Output Wiring Harness is also included to mount a switch and connect directly to the battery.Designed for performance. You may think that you'll get lots of glare from light bouncing off the hood. However, thanks to custom-engineering TIR optics, Diode Dynamics Stage Series LED light bars shine light in a highly-functional and useful beam pattern, much more focused than older LEDs on the market. The Driving optic easily shines right over the hood, even with the low mounting position.Functional Patterns. All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you!The Driving pattern was designed to supplement your high beams. Rather than a simple spot pattern, the Stage Series Driving pattern has a rectangular 20Wx8H degree pattern that is far more useful for directing light downrange at high speeds.The Flood pattern was designed to provide uniform, even illumination and a full 80Wx50H degree spread of light. Unlike generic flood light optics that are simply a heavily diffused spot, our flood optic is a true optically designed spread, resulting in the biggest spread in the industry! It is perfect for lighting up anything at low speeds, a backup or reverse light, or to light up a worksite.The Combo pattern combines both the Driving and Flood optics. It shines light downrange in a focused, rectangular 20Wx8H degree pattern while also illuminating area around it in a full 80Wx50H degree spread. The Stage Series 50 Inch Combo Light Bar features six driving lenses in the middle with two flood lenses on the outer edges.Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.FeaturesJeep 2018 SS50 Hood LED Kit Amber ComboCAD-designed for perfect fitment on 2018 and Up Jeep JL WranglerAllows you to mount one 50 Inch light bar across the hoodIncludes OEM-style automotive grade hardware designed specifically for this kitDesigned to eliminate excess wind noiseUtilizes existing mounting points for easy installation - no cutting or drilling requiredHighly durable powdercoated steel constructionControl through factory aux switch bank using the included harnessWhat's Included In the Box:Hood Bracket Light Bar Kit:Two (2) Application-specific hood bracketsOne (1) SS50 Stage Series 50 Inch Light BarsOne (1) OEM Auxillary Switch Dual-Output HarnessOne (1) Heavy Duty Single-Output HarnessFour (4) Delrin spacersFour (4) OEM-style automotive grade boltsInstallation GuideQuantity: Pair (Left and Right Side)Warranty: 3 year warrantyReturn Policy: 30-day Return with no restocking fee100 percent Satisfaction GuaranteeFitmentThis kit is compatible with all Sport, Sport S, Sahara, and Rubicon trim levelsMake: JeepModel: WranglerYears: 2018, 2019Electrical Compatibility: No electrical issues (tested and confirmed)SpecificationsColor Temp (CCT): 2000K, 6000KBeam Angle: Driving, 20 Degree x8 Degree, Combo (Driving and Flood), Flood, 80 Degree x50 DegreePower (watts): 259Operating Voltage: 9-16VCurrent (amps at 13.2V): 18.5Bracket Thickness: 10 gaPolarity: Polarity SpecificOperating Temperature: -40C to 85C (-40F to 185F)LED Emitter: Luxeon Z ESConnector(s): Deutsch DT InputMaterials: Aluminum PCB, Polycarbonate Lens, Aluminum HeatsinkCooling: Passive, heatsinkIntrusion Ratings: IP68 Waterproof
    • $709.95
    10 left in stock. Backorder available
  • Jeep 2018 SS50 Hood LED Kit Amber Flood Diode Dynamics
    Perfect fitment. The Hood LED Light Bar Kit for the 2018-2019 Jeep Wrangler from Diode Dynamics allows you to easily mount a 50 Inch light bar across the hood. These application-specific brackets were CAD-designed to install using factory mounting points. No cutting or drilling required! When installed along with our fully-customizable JL Wrangler Cowl Mount Brackets, you can easily mount multiple pods on either side of the 50 Inch light bar as well. Low profile. These L-shaped brackets were designed in-house specifically for our Stage Series light bar. They were designed to be low profile and won't block visibility while driving or block the wiper nozzles. This also means you won't hear whistling or major wind noise like you may have experienced with other light bar brackets. Not your average hardware. The hardware included with this kit is OEM-style, automotive grade hardware. This hardware isn't from the hardware store - it was custom designed for this kit with integrated washers and the same OEM finish as the factory hardware. The Delrin spacers are long-lasting and won't wear over time. Control through aux switch bank. Included with the full light bar kit is our new OEM Auxiliary Switch Dual-Output Wiring Harness. This harness allows you to control your auxiliary lighting using the factory-installed aux switch bank. For those who don't have the aux switch bank, our Heavy Duty Dual-Output Wiring Harness is also included to mount a switch and connect directly to the battery. Designed for performance. You may think that you'll get lots of glare from light bouncing off the hood. However, thanks to custom-engineering TIR optics, Diode Dynamics Stage Series LED light bars shine light in a highly-functional and useful beam pattern, much more focused than older LEDs on the market. The Driving optic easily shines right over the hood, even with the low mounting position. Functional Patterns. All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you! The Driving pattern was designed to supplement your high beams. Rather than a simple spot pattern, the Stage Series Driving pattern has a rectangular 20Wx8H degree pattern that is far more useful for directing light downrange at high speeds. The Flood pattern was designed to provide uniform, even illumination and a full 80Wx50H degree spread of light. Unlike generic flood light optics that are simply a heavily diffused spot, our flood optic is a true optically designed spread, resulting in the biggest spread in the industry! It is perfect for lighting up anything at low speeds, a backup or reverse light, or to light up a worksite. The Combo pattern combines both the Driving and Flood optics. It shines light downrange in a focused, rectangular 20Wx8H degree pattern while also illuminating area around it in a full 80Wx50H degree spread. The Stage Series 50 Inch Combo Light Bar features six driving lenses in the middle with two flood lenses on the outer edges. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.Features Jeep 2018 SS50 Hood LED Kit Amber Flood CAD-designed for perfect fitment on 2018 and Up Jeep JL Wrangler Allows you to mount one 50 Inch light bar across the hood Includes OEM-style automotive grade hardware designed specifically for this kit Designed to eliminate excess wind noise Utilizes existing mounting points for easy installation - no cutting or drilling required Highly durable powdercoated steel construction Control through factory aux switch bank using the included harness What's Included In the Box: Hood Bracket Light Bar Kit: Two (2) Application-specific hood brackets One (1) SS50 Stage Series 50 Inch Light Bars One (1) OEM Auxillary Switch Dual-Output Harness One (1) Heavy Duty Single-Output Harness Four (4) Delrin spacers Four (4) OEM-style automotive grade bolts Installation Guide Quantity: Pair (Left and Right Side) Warranty: 3 year warranty Return Policy: 30-day Return with no restocking fee 100 percent Satisfaction Guarantee Fitment This kit is compatible with all Sport, Sport S, Sahara, and Rubicon trim levels Make: Jeep Model: Wrangler Years: 2018, 2019 Electrical Compatibility: No electrical issues (tested and confirmed) Specifications Color Temp (CCT): 2000K, 6000K Beam Angle: Driving, 20 Degree x8 Degree, Combo (Driving and Flood), Flood, 80 Degree x50 Degree Power (watts): 259 Operating Voltage: 9-16V Current (amps at 13.2V): 18.5 Bracket Thickness: 10 ga Polarity: Polarity Specific Operating Temperature: -40C to 85C (-40F to 185F) LED Emitter: Luxeon Z ES Connector(s): Deutsch DT Input Materials: Aluminum PCB, Polycarbonate Lens, Aluminum Heatsink Cooling: Passive, heatsink Intrusion Ratings: IP68 Waterproof
    • $709.95
    10 left in stock. Backorder available
  • 6 Inch LED Light Bar Single Row Straight SS6 Amber Wide Light Bar Single Diode Dynamics
    Introducing Stage Series LED lighting! Inspired by the needs of a professional rally driver, these light bars have been designed for maximum functionality, with compact size, custom-engineered TIR optics, and a useful beam pattern, all in a highly durable package. Compact. The lightbar is based on a narrow-profile extruded housing, to allow fitment in small and tight areas. At less than 42mm tall, they'll fit in many places a traditional dual-row light bar won't, while cutting total weight as well. The heatsink design also drastically reduces wind noise, and does not whistle in the wind like many generic housings. Focused. The compact size doesn't mean they're short on power! Thanks to the high-intensity Lumileds LED chips, coupled with our U.S. patent pending total internal reflection (TIR) optic, the total intensity of the Stage Series is far higher than a standard, generic light bar using basic optics or reflectors. Standard optics lose light internally, and to glare, spreading a little bit of light in every direction. Instead, the TIR optic in the Stage Series collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Functional Patterns. All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you! The Driving pattern was designed to supplement your high beams. Rather than a simple spot pattern, the Stage Series Driving pattern has a rectangular 20Wx8H degree pattern that is far more useful for directing light downrange at high speeds. The Wide pattern provides an extremely wide field of view, without wasting any light in the sky above and provides a 100Wx8H degree spread of light. It was designed to supplement your fog lights and is perfect for driving in inclement weather. The Flood pattern was designed to provide uniform, even illumination and a full 80Wx50H degree spread of light. Unlike generic flood light optics that are simply a heavily diffused spot, our flood optic is a true optically designed spread, resulting in the biggest spread in the industry! It is perfect for lighting up anything at low speeds, a backup or reverse light, or to light up a worksite. Not just off road. In six-inch size, when installed as a pair and aimed in accordance with your state's regulations, the Driving pattern meets SAE J581 as a Driving/Auxiliary High Beam Light, and the Wide pattern meets SAE J583 as a Foglamp, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability. White or Amber. All Stage Series light bars are available in a cool white or amber color. The white is a 6000K color temperature, which is a true white output, without any blue. The amber is a brilliant deep yellow color, perfect for hazards or high contrast in poor weather. The SS6 Stage Series 6 Inch White Light Bar can be found here. Change it up. Each lightbar is based on 6-inch segments. Each segment is sealed with an individual lens and a double-wall seal. This makes them more weather tight than a large, single seal, and it also allows you to change up the outer lens to suit your needs. With just a few screws, you can replace the outer lens with a new one to change the beam pattern or color. Replacement lenses can be found here. Simple connections. All Stage Series LED lighting products use a standard DT type Deutsch-style connector, and come with a 6-inch pigtail, with bare leads. You can wire yourself, use an off-the-shelf Deutsch wire harness, or select an optional Diode Dynamics wire harness. Proven Reliability. Stage Series lighting has been tested for long-term operation from -40 to 185 degrees F, vibration, moisture intrusion, and corrosion. All of these tests are completed to SAE/DOT standards, just like factory components. They've also been put to the test on-road, and are in-use by dozens of rally and endurance racing teams for nighttime stages and laps. Experience. After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly manufacture and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!Features Bar Type One (1) Single Row Straight Bar Length 6 Inch Lens Color Amber Light Pattern Wide Lux 74 Brackets Inluded Yes Advanced TIR optics provide high efficiency and focus High-intensity automotive-type LEDs with pure white color Available in Driving, Wide or Flood beam patterns Slim 42mm housing for low-profile fitment Durable matte powdercoated extrusion What's Included In the Box: One (1) LED light bar One (1) wire pigtail Universal bracket sets Quantity: One (1) Hardware: Two (2) M6 Hex Screws, for main mounting point Two (2) M5 Hex Screws, for rear mounting point Warranty: 8 year warranty 100 percent Satisfaction Guarantee Fitment With the included universal bracket set, this product can be installed on any make or model Specifications Color Temp (CCT): 2000K Beam Angle: Wide, 100 Degree x8 Degree, Driving, 20 Degree x8 Degree, Flood, 80 Degree x50 Degree Power (watts): 26.6 Operating Voltage: 9-16V Current (amps at 13.2V): 1.9 Polarity: Polarity Specific Operating Temperature: -40C to 85C (-40F to 185F) LED Emitter: Luxeon Z ES Connector(s): Deutsch DT Input Materials: Aluminum PCB, Polycarbonate Lens, Aluminum Heatsink Cooling: Passive, heatsink Intrusion Ratings: IP68 Waterproof
    • $119.95
    10 left in stock. Backorder available
  • 6 Inch LED Light Bar Single Row Straight SS6 Amber Wide Light Bar Pair Diode Dynamics
    Introducing Stage Series LED lighting! Inspired by the needs of a professional rally driver, these light bars have been designed for maximum functionality, with compact size, custom-engineered TIR optics, and a useful beam pattern, all in a highly durable package. Compact. The lightbar is based on a narrow-profile extruded housing, to allow fitment in small and tight areas. At less than 42mm tall, they'll fit in many places a traditional dual-row light bar won't, while cutting total weight as well. The heatsink design also drastically reduces wind noise, and does not whistle in the wind like many generic housings. Focused. The compact size doesn't mean they're short on power! Thanks to the high-intensity Lumileds LED chips, coupled with our U.S. patent pending total internal reflection (TIR) optic, the total intensity of the Stage Series is far higher than a standard, generic light bar using basic optics or reflectors. Standard optics lose light internally, and to glare, spreading a little bit of light in every direction. Instead, the TIR optic in the Stage Series collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Functional Patterns. All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you! The Driving pattern was designed to supplement your high beams. Rather than a simple spot pattern, the Stage Series Driving pattern has a rectangular 20Wx8H degree pattern that is far more useful for directing light downrange at high speeds. The Wide pattern provides an extremely wide field of view, without wasting any light in the sky above and provides a 100Wx8H degree spread of light. It was designed to supplement your fog lights and is perfect for driving in inclement weather. The Flood pattern was designed to provide uniform, even illumination and a full 80Wx50H degree spread of light. Unlike generic flood light optics that are simply a heavily diffused spot, our flood optic is a true optically designed spread, resulting in the biggest spread in the industry! It is perfect for lighting up anything at low speeds, a backup or reverse light, or to light up a worksite. Not just off road. In six-inch size, when installed as a pair and aimed in accordance with your state's regulations, the Driving pattern meets SAE J581 as a Driving/Auxiliary High Beam Light, and the Wide pattern meets SAE J583 as a Foglamp, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability. White or Amber. All Stage Series light bars are available in a cool white or amber color. The white is a 6000K color temperature, which is a true white output, without any blue. The amber is a brilliant deep yellow color, perfect for hazards or high contrast in poor weather. The SS6 Stage Series 6 Inch White Light Bar can be found here. Change it up. Each lightbar is based on 6-inch segments. Each segment is sealed with an individual lens and a double-wall seal. This makes them more weather tight than a large, single seal, and it also allows you to change up the outer lens to suit your needs. With just a few screws, you can replace the outer lens with a new one to change the beam pattern or color. Replacement lenses can be found here. Simple connections. All Stage Series LED lighting products use a standard DT type Deutsch-style connector, and come with a 6-inch pigtail, with bare leads. You can wire yourself, use an off-the-shelf Deutsch wire harness, or select an optional Diode Dynamics wire harness. Proven Reliability. Stage Series lighting has been tested for long-term operation from -40 to 185 degrees F, vibration, moisture intrusion, and corrosion. All of these tests are completed to SAE/DOT standards, just like factory components. They've also been put to the test on-road, and are in-use by dozens of rally and endurance racing teams for nighttime stages and laps. Experience. After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly manufacture and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!Features Bar Type Pair (2) Single Row Straight Bar Length 6 Inch Lens Color Amber Light Pattern Wide Lux 74 Brackets Inluded Yes Advanced TIR optics provide high efficiency and focus High-intensity automotive-type LEDs with pure white color Available in Driving, Wide or Flood beam patterns Slim 42mm housing for low-profile fitment Durable matte powdercoated extrusion What's Included In the Box: Two (2) LED light bars Two (2) wire pigtails Two (2) Universal bracket sets Quantity: Two (2) Hardware: Two (2) M6 Hex Screws, for main mounting point Two (2) M5 Hex Screws, for rear mounting point Warranty: 8 year warranty 100 percent Satisfaction Guarantee Fitment With the included universal bracket set, this product can be installed on any make or model Specifications Color Temp (CCT): 2000K Beam Angle: Wide, 100 Degree x8 Degree, Driving, 20 Degree x8 Degree, Flood, 80 Degree x50 Degree Power (watts): 26.6 Operating Voltage: 9-16V Current (amps at 13.2V): 1.9 Polarity: Polarity Specific Operating Temperature: -40C to 85C (-40F to 185F) LED Emitter: Luxeon Z ES Connector(s): Deutsch DT Input Materials: Aluminum PCB, Polycarbonate Lens, Aluminum Heatsink Cooling: Passive, heatsink Intrusion Ratings: IP68 Waterproof
    • $239.95
    10 left in stock. Backorder available
  • 50 Inch LED Light Bar Amber Driving Light Bar Stealth Series Diode Dynamics
    Introducing Stage Series LED lighting! Inspired by the needs of a professional rally driver, these light bars have been designed for maximum functionality, with compact size, custom-engineered TIR optics, and a useful beam pattern, all in a highly durable package. Compact. The lightbar is based on a narrow-profile extruded housing, to allow fitment in small and tight areas. At less than 42mm tall, they'll fit in many places a traditional dual-row light bar won't, while cutting total weight as well. The heatsink design also drastically reduces wind noise, and does not whistle in the wind like many generic housings. Focused. The compact size doesn't mean they're short on power! Thanks to the high-intensity Lumileds LED chips, coupled with our U.S. Patent Pending total internal reflection (TIR) optic, the total intensity of the Stage Series is far higher than a standard, generic light bar using basic optics or reflectors. Standard optics lose light internally, and to glare, spreading a little bit of light in every direction. Instead, the TIR optic in the Stage Series collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Functional Patterns. All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you! The Driving pattern was designed to supplement your high beams. Rather than a simple spot pattern, the Stage Series Driving pattern has a rectangular 20Wx8H degree pattern that is far more useful for directing light downrange at high speeds. The Flood pattern was designed to provide uniform, even illumination and a full 80Wx50H degree spread of light. Unlike generic flood light optics that are simply a heavily diffused spot, our flood optic is a true optically designed spread, resulting in the biggest spread in the industry! It is perfect for lighting up anything at low speeds, a backup or reverse light, or to light up a worksite. The Combo pattern combines both the Driving and Flood optics. It shines light downrange in a focused, rectangular 20Wx8H degree pattern while also illuminating area around it in a full 80Wx50H degree spread. The Stage Series 50 Inch Combo Light Bar features six driving lenses in the middle with two flood lenses on the outer edges. Not just off road. In six-inch size, when installed as a pair and aimed in accordance with your state's regulations, the Driving pattern meets SAE J581 as a Driving/Auxiliary High Beam Light, and the Wide pattern meets SAE J583 as a Foglamp, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability. White or Amber. All Stage Series light bars are available in a cool white or amber color. The white is a 6000K color temperature, which is a true white output, without any blue. The amber is a brilliant deep yellow color, perfect for hazards or high contrast in poor weather. Change it up. Each lightbar is based on 6-inch segments. Each segment is sealed with an individual lens and a double-wall seal. This makes them more weather tight than a large, single seal, and it also allows you to change up the outer lens to suit your needs. With just a few screws, you can replace the outer lens with a new one to change the beam pattern or color. Simple connections. All Stage Series LED lighting products use a standard DT type Deutsch-style connector, and come with a 6-inch pigtail, with bare leads. You can wire yourself, use an off-the-shelf Deutsch wire harness, or select an optional Diode Dynamics wire harness. Proven Reliability. Stage Series lighting has been tested for long-term operation from -40 to 185 degrees F, vibration, moisture intrusion, and corrosion. All of these tests are completed to SAE/DOT standards, just like factory components. They've also been put to the test on-road, and are in-use by dozens of rally and endurance racing teams for nighttime stages and laps. Experience. After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly manufacture and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!Features Bar Type One (1) Single Row Straight Bar Length 50 Inch Lens Color Amber Light Pattern Driving Lux 2640 Brackets Inluded Yes Advanced TIR optics provide high efficiency and focus High-intensity automotive-type LEDs with pure white color Available in Driving, Flood, or Combo beam patterns Slim 42mm housing for low-profile fitment Durable matte powdercoated extrusion What's Included In the Box: One (1) LED light bar One (1) wire pigtail Universal bracket set Quantity: One (1) Hardware: Two (2) M6 Hex Screws, for main mounting point Two (2) M5 Hex Screws, for rear mounting point Warranty: 8 year warranty 100 percent Satisfaction Guarantee Fitment With the included universal bracket set, this product can be installed on any make or model Specifications Color Temp (CCT): 2000K Beam Angle: Driving, 20 Degree x8 Degree, Combo (Driving and Flood), Flood, 80 Degree x50 Degree Power (watts): 259 Operating Voltage: 9-16V Current (amps at 13.2V): 18.5 Polarity: Polarity Specific Operating Temperature: -40C to 85C (-40F to 185F) LED Emitter: Luxeon Z ES Connector(s): Deutsch DT Input Materials: Aluminum PCB, Polycarbonate Lens, Aluminum Heatsink Cooling: Passive, heatsink Intrusion Ratings: IP68 Waterproof
    • $639.95
    10 left in stock. Backorder available
  • 42 Inch LED Light Bar Single Row Straight Amber Driving Each Stage Series Diode Dynamics
    Introducing Stage Series LED lighting! Inspired by the needs of a professional rally driver, these light bars have been designed for maximum functionality, with compact size, custom-engineered TIR optics, and a useful beam pattern, all in a highly durable package. Compact. The lightbar is based on a narrow-profile extruded housing, to allow fitment in small and tight areas. At less than 42mm tall, they'll fit in many places a traditional dual-row light bar won't, while cutting total weight as well. The heatsink design also drastically reduces wind noise, and does not whistle in the wind like many generic housings. Focused. The compact size doesn't mean they're short on power! Thanks to the high-intensity Lumileds LED chips, coupled with our U.S. Patent Pending total internal reflection (TIR) optic, the total intensity of the Stage Series is far higher than a standard, generic light bar using basic optics or reflectors. Standard optics lose light internally, and to glare, spreading a little bit of light in every direction. Instead, the TIR optic in the Stage Series collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Functional Patterns. All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you! The Driving pattern was designed to supplement your high beams. Rather than a simple spot pattern, the Stage Series Driving pattern has a rectangular 20Wx8H degree pattern that is far more useful for directing light downrange at high speeds. The Flood pattern was designed to provide uniform, even illumination and a full 80Wx50H degree spread of light. Unlike generic flood light optics that are simply a heavily diffused spot, our flood optic is a true optically designed spread, resulting in the biggest spread in the industry! It is perfect for lighting up anything at low speeds, a backup or reverse light, or to light up a worksite. The Combo pattern combines both the Driving and Flood optics. It shines light downrange in a focused, rectangular 20Wx8H degree pattern while also illuminating area around it in a full 80Wx50H degree spread. The Stage Series 42 Inch Combo Light Bar features five driving lenses in the middle with two flood lenses on the outer edges. Not just off road. In six-inch size, when installed as a pair and aimed in accordance with your state's regulations, the Driving pattern meets SAE J581 as a Driving/Auxiliary High Beam Light, and the Wide pattern meets SAE J583 as a Foglamp, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability. White or Amber. All Stage Series light bars are available in a cool white or amber color. The white is a 6000K color temperature, which is a true white output, without any blue. The amber is a brilliant deep yellow color, perfect for hazards or high contrast in poor weather. Change it up. Each lightbar is based on 6-inch segments. Each segment is sealed with an individual lens and a double-wall seal. This makes them more weather tight than a large, single seal, and it also allows you to change up the outer lens to suit your needs. With just a few screws, you can replace the outer lens with a new one to change the beam pattern or color. Simple connections. All Stage Series LED lighting products use a standard DT type Deutsch-style connector, and come with a 6-inch pigtail, with bare leads. You can wire yourself, use an off-the-shelf Deutsch wire harness, or select an optional Diode Dynamics wire harness. Proven Reliability. Stage Series lighting has been tested for long-term operation from -40 to 185 degrees F, vibration, moisture intrusion, and corrosion. All of these tests are completed to SAE/DOT standards, just like factory components. They've also been put to the test on-road, and are in-use by dozens of rally and endurance racing teams for nighttime stages and laps. Experience. After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly manufacture and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!Features Bar Type One (1) Single Row Straight Bar Length 42 Inch Lens Color Amber Light Pattern Driving Lux 2310 Brackets Inluded Yes Advanced TIR optics provide high efficiency and focus High-intensity automotive-type LEDs with pure white color Available in Driving, Flood, or Combo beam patterns Slim 42mm housing for low-profile fitment Durable matte powdercoated extrusion What's Included In the Box: One (1) LED light bar One (1) wire pigtail Universal bracket set Quantity: One (1) Hardware: Two (2) M6 Hex Screws, for main mounting point Two (2) M5 Hex Screws, for rear mounting point Warranty: 8 year warranty 100 percent Satisfaction Guarantee Fitment With the included universal bracket set, this product can be installed on any make or model Specifications Color Temp (CCT): 2000K Beam Angle: Driving, 20 Degree x8 Degree, Combo (Driving and Flood), Flood, 80 Degree x50 Degree Power (watts): 224 Operating Voltage: 9-16V Current (amps at 13.2V): 16 Polarity: Polarity Specific Operating Temperature: -40C to 85C (-40F to 185F) LED Emitter: Luxeon Z ES Connector(s): Deutsch DT Input Materials: Aluminum PCB, Polycarbonate Lens, Aluminum Heatsink Cooling: Passive, heatsink Intrusion Ratings: IP68 Waterproof
    • $559.95
    10 left in stock. Backorder available
  • 30 Inch LED Light Bar Single Row Straight Amber Driving Each Stage Series Diode Dynamics
    Introducing Stage Series LED lighting! Inspired by the needs of a professional rally driver, these light bars have been designed for maximum functionality, with compact size, custom-engineered TIR optics, and a useful beam pattern, all in a highly durable package. Compact. The lightbar is based on a narrow-profile extruded housing, to allow fitment in small and tight areas. At less than 42mm tall, they'll fit in many places a traditional dual-row light bar won't, while cutting total weight as well. The heatsink design also drastically reduces wind noise, and does not whistle in the wind like many generic housings. Focused. The compact size doesn't mean they're short on power! Thanks to the high-intensity Lumileds LED chips, coupled with our U.S. Patent Pending total internal reflection (TIR) optic, the total intensity of the Stage Series is far higher than a standard, generic light bar using basic optics or reflectors. Standard optics lose light internally, and to glare, spreading a little bit of light in every direction. Instead, the TIR optic in the Stage Series collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Functional Patterns. All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you! The Driving pattern was designed to supplement your high beams. Rather than a simple spot pattern, the Stage Series Driving pattern has a rectangular 20Wx8H degree pattern that is far more useful for directing light downrange at high speeds. The Flood pattern was designed to provide uniform, even illumination and a full 80Wx50H degree spread of light. Unlike generic flood light optics that are simply a heavily diffused spot, our flood optic is a true optically designed spread, resulting in the biggest spread in the industry! It is perfect for lighting up anything at low speeds, a backup or reverse light, or to light up a worksite. The Combo pattern combines both the Driving and Flood optics. It shines light downrange in a focused, rectangular 20Wx8H degree pattern while also illuminating area around it in a full 80Wx50H degree spread. The Stage Series 30 Inch Combo Light Bar features three driving lenses in the middle with two flood lenses on the outer edges. Not just off road. In six-inch size, when installed as a pair and aimed in accordance with your state's regulations, the Driving pattern meets SAE J581 as a Driving/Auxiliary High Beam Light, and the Wide pattern meets SAE J583 as a Foglamp, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability. White or Amber. All Stage Series light bars are available in a cool white or amber color. The white is a 6000K color temperature, which is a true white output, without any blue. The amber is a brilliant deep yellow color, perfect for hazards or high contrast in poor weather. Change it up. Each lightbar is based on 6-inch segments. Each segment is sealed with an individual lens and a double-wall seal. This makes them more weather tight than a large, single seal, and it also allows you to change up the outer lens to suit your needs. With just a few screws, you can replace the outer lens with a new one to change the beam pattern or color. Simple connections. All Stage Series LED lighting products use a standard DT type Deutsch-style connector, and come with a 6-inch pigtail, with bare leads. You can wire yourself, use an off-the-shelf Deutsch wire harness, or select an optional Diode Dynamics wire harness. Proven Reliability. Stage Series lighting has been tested for long-term operation from -40 to 185 degrees F, vibration, moisture intrusion, and corrosion. All of these tests are completed to SAE/DOT standards, just like factory components. They've also been put to the test on-road, and are in-use by dozens of rally and endurance racing teams for nighttime stages and laps. Experience. After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly manufacture and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!Features Bar Type One (1) Single Row Straight Bar Length 30 Inch Lens Color Amber Light Pattern Driving Lux 1650 Brackets Inluded Yes Advanced TIR optics provide high efficiency and focus High-intensity automotive-type LEDs with pure white color Available in Driving, Flood, or Combo beam patterns Slim 42mm housing for low-profile fitment Durable matte powdercoated extrusion What's Included In the Box: One (1) LED light bar One (1) wire pigtail Universal bracket set Quantity: One (1) Hardware: Two (2) M6 Hex Screws, for main mounting point Two (2) M5 Hex Screws, for rear mounting point Warranty: 8 year warranty 100 percent Satisfaction Guarantee Fitment With the included universal bracket set, this product can be installed on any make or model Specifications Color Temp (CCT): 2000K Beam Angle: Driving, 20 Degree x8 Degree, Combo (Driving and Flood), Flood, 80 Degree x50 Degree Power (watts): 137.2 Operating Voltage: 9-16V Current (amps at 13.2V): 9.8 Polarity: Polarity Specific Operating Temperature: -40C to 85C (-40F to 185F) LED Emitter: Luxeon Z ES Connector(s): Deutsch DT Input Materials: Aluminum PCB, Polycarbonate Lens, Aluminum Heatsink Cooling: Passive, heatsink Intrusion Ratings: IP68 Waterproof
    • $439.95
    10 left in stock. Backorder available
  • 18 Inch LED Light Bar Single Row Straight Amber Driving Each Stage Series Diode Dynamics
    Introducing Stage Series LED lighting! Inspired by the needs of a professional rally driver, these light bars have been designed for maximum functionality, with compact size, custom-engineered TIR optics, and a useful beam pattern, all in a highly durable package. Compact. The lightbar is based on a narrow-profile extruded housing, to allow fitment in small and tight areas. At less than 42mm tall, they'll fit in many places a traditional dual-row light bar won't, while cutting total weight as well. The heatsink design also drastically reduces wind noise, and does not whistle in the wind like many generic housings. Focused. The compact size doesn't mean they're short on power! Thanks to the high-intensity Lumileds LED chips, coupled with our U.S. Patent Pending total internal reflection (TIR) optic, the total intensity of the Stage Series is far higher than a standard, generic light bar using basic optics or reflectors. Standard optics lose light internally, and to glare, spreading a little bit of light in every direction. Instead, the TIR optic in the Stage Series collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Functional Patterns. All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you! The Driving pattern was designed to supplement your high beams. Rather than a simple spot pattern, the Stage Series Driving pattern has a rectangular 20Wx8H degree pattern that is far more useful for directing light downrange at high speeds. The Flood pattern was designed to provide uniform, even illumination and a full 80Wx50H degree spread of light. Unlike generic flood light optics that are simply a heavily diffused spot, our flood optic is a true optically designed spread, resulting in the biggest spread in the industry! It is perfect for lighting up anything at low speeds, a backup or reverse light, or to light up a worksite. The Combo pattern combines both the Driving and Flood optics. It shines light downrange in a focused, rectangular 20Wx8H degree pattern while also illuminating area around it in a full 80Wx50H degree spread. The Stage Series 18 Inch Combo Light Bar features a single flood lens in the middle with two driving lenses on the outer edges. Not just off road. In six-inch size, when installed as a pair and aimed in accordance with your state's regulations, the Driving pattern meets SAE J581 as a Driving/Auxiliary High Beam Light, and the Wide pattern meets SAE J583 as a Foglamp, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability. White or Amber. All Stage Series light bars are available in a cool white or amber color. The white is a 6000K color temperature, which is a true white output, without any blue. The amber is a brilliant deep yellow color, perfect for hazards or high contrast in poor weather. Change it up. Each lightbar is based on 6-inch segments. Each segment is sealed with an individual lens and a double-wall seal. This makes them more weather tight than a large, single seal, and it also allows you to change up the outer lens to suit your needs. With just a few screws, you can replace the outer lens with a new one to change the beam pattern or color. Simple connections. All Stage Series LED lighting products use a standard DT type Deutsch-style connector, and come with a 6-inch pigtail, with bare leads. You can wire yourself, use an off-the-shelf Deutsch wire harness, or select an optional Diode Dynamics wire harness. Proven Reliability. Stage Series lighting has been tested for long-term operation from -40 to 185 degrees F, vibration, moisture intrusion, and corrosion. All of these tests are completed to SAE/DOT standards, just like factory components. They've also been put to the test on-road, and are in-use by dozens of rally and endurance racing teams for nighttime stages and laps. Experience. After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly manufacture and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!Features Bar Type One (1) Single Row Straight Bar Length 18 Inch Lens Color Amber Light Pattern Driving Lux 1650 Brackets Inluded Yes Advanced TIR optics provide high efficiency and focus High-intensity automotive-type LEDs with pure white color Available in Driving, Flood, or Combo beam patterns Slim 42mm housing for low-profile fitment Durable matte powdercoated extrusion What's Included In the Box: One (1) LED light bar One (1) wire pigtail Universal bracket set Quantity: One (1) Hardware: Two (2) M6 Hex Screws, for main mounting point Two (2) M5 Hex Screws, for rear mounting point Warranty: 8 year warranty 100 percent Satisfaction Guarantee Fitment With the included universal bracket set, this product can be installed on any make or model Specifications Color Temp (CCT): 2000K Beam Angle: Driving, 20 Degree x8 Degree, Combo (Driving and Flood), Flood, 80 Degree x50 Degree Power (watts): 79.8 Operating Voltage: 9-16V Current (amps at 13.2V): 5.7 Polarity: Polarity Specific Operating Temperature: -40C to 85C (-40F to 185F) LED Emitter: Luxeon Z ES Connector(s): Deutsch DT Input Materials: Aluminum PCB, Polycarbonate Lens, Aluminum Heatsink Cooling: Passive, heatsink Intrusion Ratings: IP68 Waterproof
    • $279.95
    10 left in stock. Backorder available
  • 12 Inch LED Light Bar Single Row Straight Amber Driving Each Stage Series Diode Dynamics
    Introducing Stage Series LED lighting! Inspired by the needs of a professional rally driver, these light bars have been designed for maximum functionality, with compact size, custom-engineered TIR optics, and a useful beam pattern, all in a highly durable package. Compact. The lightbar is based on a narrow-profile extruded housing, to allow fitment in small and tight areas. At less than 42mm tall, they'll fit in many places a traditional dual-row light bar won't, while cutting total weight as well. The heatsink design also drastically reduces wind noise, and does not whistle in the wind like many generic housings. Focused. The compact size doesn't mean they're short on power! Thanks to the high-intensity Lumileds LED chips, coupled with our U.S. patent pending total internal reflection (TIR) optic, the total intensity of the Stage Series is far higher than a standard, generic light bar using basic optics or reflectors. Standard optics lose light internally, and to glare, spreading a little bit of light in every direction. Instead, the TIR optic in the Stage Series collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Functional Patterns. All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you! The Driving pattern was designed to supplement your high beams. Rather than a simple spot pattern, the Stage Series Driving pattern has a rectangular 20Wx8H degree pattern that is far more useful for directing light downrange at high speeds. The Wide pattern provides an extremely wide field of view, without wasting any light in the sky above and provides a 100Wx8H degree spread of light. It was designed to supplement your fog lights and is perfect for driving in inclement weather. The Flood pattern was designed to provide uniform, even illumination and a full 80Wx50H degree spread of light. Unlike generic flood light optics that are simply a heavily diffused spot, our flood optic is a true optically designed spread, resulting in the biggest spread in the industry! It is perfect for lighting up anything at low speeds, a backup or reverse light, or to light up a worksite. Not just off road. In six-inch size, when installed as a pair and aimed in accordance with your state's regulations, the Driving pattern meets SAE J581 as a Driving/Auxiliary High Beam Light, and the Wide pattern meets SAE J583 as a Foglamp, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability. White or Amber. All Stage Series light bars are available in a cool white or amber color. The white is a 6000K color temperature, which is a true white output, without any blue. The amber is a brilliant deep yellow color, perfect for hazards or high contrast in poor weather. Change it up. Each lightbar is based on 6-inch segments. Each segment is sealed with an individual lens and a double-wall seal. This makes them more weather tight than a large, single seal, and it also allows you to change up the outer lens to suit your needs. With just a few screws, you can replace the outer lens with a new one to change the beam pattern or color. Simple connections. All Stage Series LED lighting products use a standard DT type Deutsch-style connector, and come with a 6-inch pigtail, with bare leads. You can wire yourself, use an off-the-shelf Deutsch wire harness, or select an optional Diode Dynamics wire harness. Proven Reliability. Stage Series lighting has been tested for long-term operation from -40 to 185 degrees F, vibration, moisture intrusion, and corrosion. All of these tests are completed to SAE/DOT standards, just like factory components. They've also been put to the test on-road, and are in-use by dozens of rally and endurance racing teams for nighttime stages and laps. Experience. After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly manufacture and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!Features Bar Type One (1) Single Row Straight Bar Length 12 Inch Lens Color Amber Light Pattern Driving Lux 660 Brackets Inluded Yes Advanced TIR optics provide high efficiency and focus High-intensity automotive-type LEDs with pure white color Available in Driving, Wide or Flood beam patterns Slim 42mm housing for low-profile fitment Durable matte powdercoated extrusion What's Included In the Box: One (1) LED light bars One (1) wire pigtail Universal bracket set Quantity: One (1) Hardware: Two (2) M6 Hex Screws, for main mounting point Two (2) M5 Hex Screws, for rear mounting point Warranty: 8 year warranty 100 percent Satisfaction Guarantee Fitment With the included universal bracket set, this product can be installed on any make or model Specifications Color Temp (CCT): 2000K Beam Angle: Wide, 100 Degree x8 Degree, Driving, 20 Degree x8 Degree, Flood, 80 Degree x50 Degree Power (watts): 58.8 Operating Voltage: 9-16V Current (amps at 13.2V): 4.2 Polarity: Polarity Specific Operating Temperature: -40C to 85C (-40F to 185F) LED Emitter: Luxeon Z ES Connector(s): Deutsch DT Input Materials: Aluminum PCB, Polycarbonate Lens, Aluminum Heatsink Cooling: Passive, heatsink Intrusion Ratings: IP68 Waterproof
    • $199.95
    10 left in stock. Backorder available
  • 12 Inch LED Light Bar Single Row Straight Amber Driving Pair Stage Series Diode Dynamics
    Introducing Stage Series LED lighting! Inspired by the needs of a professional rally driver, these light bars have been designed for maximum functionality, with compact size, custom-engineered TIR optics, and a useful beam pattern, all in a highly durable package. Compact. The lightbar is based on a narrow-profile extruded housing, to allow fitment in small and tight areas. At less than 42mm tall, they'll fit in many places a traditional dual-row light bar won't, while cutting total weight as well. The heatsink design also drastically reduces wind noise, and does not whistle in the wind like many generic housings. Focused. The compact size doesn't mean they're short on power! Thanks to the high-intensity Lumileds LED chips, coupled with our U.S. patent pending total internal reflection (TIR) optic, the total intensity of the Stage Series is far higher than a standard, generic light bar using basic optics or reflectors. Standard optics lose light internally, and to glare, spreading a little bit of light in every direction. Instead, the TIR optic in the Stage Series collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Functional Patterns. All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you! The Driving pattern was designed to supplement your high beams. Rather than a simple spot pattern, the Stage Series Driving pattern has a rectangular 20Wx8H degree pattern that is far more useful for directing light downrange at high speeds. The Wide pattern provides an extremely wide field of view, without wasting any light in the sky above and provides a 100Wx8H degree spread of light. It was designed to supplement your fog lights and is perfect for driving in inclement weather. The Flood pattern was designed to provide uniform, even illumination and a full 80Wx50H degree spread of light. Unlike generic flood light optics that are simply a heavily diffused spot, our flood optic is a true optically designed spread, resulting in the biggest spread in the industry! It is perfect for lighting up anything at low speeds, a backup or reverse light, or to light up a worksite. Not just off road. In six-inch size, when installed as a pair and aimed in accordance with your state's regulations, the Driving pattern meets SAE J581 as a Driving/Auxiliary High Beam Light, and the Wide pattern meets SAE J583 as a Foglamp, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability. White or Amber. All Stage Series light bars are available in a cool white or amber color. The white is a 6000K color temperature, which is a true white output, without any blue. The amber is a brilliant deep yellow color, perfect for hazards or high contrast in poor weather. Change it up. Each lightbar is based on 6-inch segments. Each segment is sealed with an individual lens and a double-wall seal. This makes them more weather tight than a large, single seal, and it also allows you to change up the outer lens to suit your needs. With just a few screws, you can replace the outer lens with a new one to change the beam pattern or color. Simple connections. All Stage Series LED lighting products use a standard DT type Deutsch-style connector, and come with a 6-inch pigtail, with bare leads. You can wire yourself, use an off-the-shelf Deutsch wire harness, or select an optional Diode Dynamics wire harness. Proven Reliability. Stage Series lighting has been tested for long-term operation from -40 to 185 degrees F, vibration, moisture intrusion, and corrosion. All of these tests are completed to SAE/DOT standards, just like factory components. They've also been put to the test on-road, and are in-use by dozens of rally and endurance racing teams for nighttime stages and laps. Experience. After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly manufacture and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!Features Bar Type Pair (2) Single Row Straight Bar Length 12 Inch Lens Color Amber Light Pattern Driving Lux 660 Brackets Inluded Yes Advanced TIR optics provide high efficiency and focus High-intensity automotive-type LEDs with pure white color Available in Driving, Wide or Flood beam patterns Slim 42mm housing for low-profile fitment Durable matte powdercoated extrusion What's Included In the Box: Two (2) LED light bars Two (2) wire pigtails Two (2) Universal bracket sets Quantity: Two (2) Hardware: Two (2) M6 Hex Screws, for main mounting point Two (2) M5 Hex Screws, for rear mounting point Warranty: 8 year warranty 100 percent Satisfaction Guarantee Fitment With the included universal bracket set, this product can be installed on any make or model Specifications Color Temp (CCT): 2000K Beam Angle: Wide, 100 Degree x8 Degree, Driving, 20 Degree x8 Degree, Flood, 80 Degree x50 Degree Power (watts): 58.8 Operating Voltage: 9-16V Current (amps at 13.2V): 4.2 Polarity: Polarity Specific Operating Temperature: -40C to 85C (-40F to 185F) LED Emitter: Luxeon Z ES Connector(s): Deutsch DT Input Materials: Aluminum PCB, Polycarbonate Lens, Aluminum Heatsink Cooling: Passive, heatsink Intrusion Ratings: IP68 Waterproof
    • $399.95
    10 left in stock. Backorder available
Products: 112 of 142
  • 4X6" Red LED COB Halo Crystal Glass/Metal Headlight H4 6K HID Light Bulb Pair
    OCTANE LIGHTING - 4"x6" DIAMOND CRYSTAL CLEAR GLASS LENS / METAL HOUSING H4 CONVERSION HEADLIGHTS WITH BUILT IN RED COB LED HALO ANGEL EYE RINGS - PAIRHalo rings can be wired into the parking lights, headlights, turn signals, or connected to a separate switch.Extremely Bright Halo Ring! - Day or NightINCLUDES 6000K HIGH INTENSITY DISCHARGE (HID) HI/LOW BI-XENON SLIM BALLAST LIGHT BULB KIT! PAIR - LEFT & RIGHT SIDE New PAIR of 2 Headlamps SAE/DOT Approved - Street Legal3000 Lumen Headlight BrightnessDaylight White Visibility6000k (White Color) AC Slim Ballast 35w Bi-Xenon HID KitHigh & Low Beam FunctionPlugs into Factory Wiring ConnectionBrighter and Whiter than stock headlights High Quality Glass Faced & Metal Backed Semi-Sealed Beam - Removable / Replaceable Light Bulbs Fits cars and trucks with 4x6 rectangle headlightsFits into stock headlight bucketPart number interchange: H4651/H4656/4651/4652Halo is wired separately with power/ground wireExtremely Bright Halo - Visible day or nightDOT / SAE approved THIS LISTING IS FOR A NEW PAIR - 4x6" CRYSTAL CLEAR GLASS LENS / METAL BACKSIDE H4 CONVERSION RED LED HALO HEADLIGHTS. INCLUDES 6000K BI-XENON HI/LOW SUPER BRIGHT WHITE HID KITS. THIS SET INCLUDES (2) HEADLIGHTS, (2) 6K HID BULBS, (2) HID SLIM DIGITAL BALLASTS AND RELAY HARNESSES. THESE HAVE THE ORIGINAL SHAPED PRONGS ON THE BACK SO THEY WILL PLUG RIGHT INTO YOUR ORIGINAL WIRING HARNESS PLUGS. IN RARE CIRCUMSTANCES, WIRING MODIFICATION MAY BE REQUIRED. THIS KIT IS BI-XENON, MEANING YOU WILL HAVE LOW BEAM AND HIGH BEAM FUNCTION WITH THE HID LIGHT KIT. THE HALO IS EXTREMELY BRIGHT AND WIRED SEPARATELY WITH A POWER AND GROUND WIRE. THE HALO CAN BE SPLICED INTO THE PARKING LIGHTS, TURN SIGNAL, IGNITION SOURCE FOR DAYTIME RUNNING LIGHTS, OR TO A SEPARATE SWITCH. THESE ARE FOR ANY CAR OR TRUCK THAT HAS 4 SQUARE 4x6" HEADLIGHTS. DOT / SAE APPROVED.INTERCHANGE: H4651 / H4656 / 4651 / 4652 THESE ARE GLASS AND WE WILL TAKE EXTRA CARE IN PACKAGING. UNRIVALED BRIGHTNESS The Standard for 35w HID Kit 3000 lumen @ 35 watts Ultra Bright HID Kit - 35% brighter than 35w DC Analog HID KitsOctane HID Bulbs - High and Low Beam Function Pushing 3000 Lumens!AC Digital Technology - No Flickering. PERIOD.Waterproof Ballasts - We coat our chips with silicone to ensure maximum protection20 Minute Setup - QuickSnapTM connectors gets you back on the road quicker Why Choose Octane Lighting? We dont cut corners. We pride ourselves on quality and reliability. Every component of this HID kit goes through a series of Quality Assurance Tests to ensure consistent color matching and stable power output. Although many HID companies use similar ballast housings, the internal components are always different and inferior. Trust the original. Trust what lasts. Your Comprehensive HID Conversion Kit Includes: (2) AC Digital 35w Power Ballasts (2) AC Ballast Igniters (2) 35w-Rated HID Bulbs (2) HID Capacitors (1) HID Power Relay Harness (2) Metal Mounting Brackets and Screws (1) Easy-to-Use Installation Instructions Features: AC Series Ballast: 35w Power Output Provides Maximum Light and Cverage Where You Need ItBetter, Brighter, Longer: Octane HID bulbs uses power more efficiently to optimally achieve an ultra-bright 3000 lumens shine while extending the bulbs life to over 3000 hoursPlug-and-Play Installation: Just connect QuickSnap™ connectors, securely lock Octane Lighting bulbs into housing and youre done. No cutting, splicing or headachesComprehensive HID kit that includes a relay harness and capacitors. Everything you need is included!
    • $209.95
  • 7X6" LED HID Light Bulbs Crystal Clear Sealed Beam Headlamp Headlight Pair
    THESE ARE A 7x6 PAIR WHITE HID LED HEADLIGHTS Replaces factory Sealed Beams - Plugs into factory headlight plugsINCLUDES (2) 15-LED DUAL BEAM HEADLIGHT ASSEMBLIESTHIS LISTING IS FOR A PAIR NEW 7x6" CRYSTAL CLEAR LENS - ALUMINUM BACKED HEADLAMP BULBS WITH 15 WHITE LEDs INSIDE THE HOUSING. THIS LISTING IS FOR 2 HEADLIGHTS. THESE WILL FIT ANY CAR OR TRUCK THAT HAS 7X6 or 5x7 INCH HEADLIGHTS. SOME MODIFICATION TO THE HEADLIGHT BUCKET MAY BE REQUIRED, BUT ON MOST CARS THEY ARE PLUG AND PLAY AND WILL ONLY TAKE YOU 15 MINUTES TO INSTALL WITH BASIC HAND TOOLS. WE WILL TAKE EXTRA CARE IN PACKAGING.INTERCHANGE: H6054 / 6054 ITEM SPECIFICS:Power Draw: 12V / 55 WBeam Pattern: Flood Beam/ Spot BeamLight Output: High Beam 3200 lumens per assembly, Low Beam 1550 lumens per assemblyColor Temperature: 5000K, 6000KOperating Voltage: 12V DCOperating Amperage: 3A at 12VWattage: 45WWaterproof Rating: IP68Light: 15 3W LEDsHousing Material: Black AluminumLens Material: Clear Polycarbonate Lens LensHours: 5000+ HoursDimensions: L-3" X W-7" X H-6"
    • $59.95
    Out of stock
  • 7" Blue Halo Ring Angel Eyes 6K 20/40w LED Headlight Headlamp Light Bulbs Pair
    OCTANE LIGHTINGPAIR - New 7" Split Circuit LED Halo Headlights   Blue LED Rings can be Wired to be Daytime Running Lights, Directional Turn Signals or to Come on with the Headlights Includes Super White 6K 20/40w G5 LED Headlight BulbsPAIR - Two Headlights7" Round Crystal Clear Glass LED Headlight w/ Blue LED Halo RingHalo Ring Has Bright LEDs Around Entire HeadlightCrystal Clear Glass Lens6000k 20/40w LED Headlight BulbsLow Beam / High Beam HeadlightHeadlight Plugs Directly into Factory Headlight Wiring Connector PlugSome Modification to the Back of the Headlight Bucket May be RequiredUnique Split Circuit Halo is Wired Separately - Can Be Used As DRL or Left & Right Directional Turn SignalsPart Number Interchange: H6024 / 6014DOT / SAE ApprovedLED BULB SPECIFICATIONS:Bulb Type: - Generation 5 - H4 (9003) LED Low Beam / High Beam Headlight with Canbus Error Canceller PlugsCanbus Error Free Electrical plugs prevent any headlight error codesWattage: 40W / EACH PC Luminous Flux: 8000LM / Set ,4000LM / Each Bulb  Beam Angle: 360°  Placement on Vehicle: Left, Right, FrontColor Temperature: 6000K Pure White
    • $119.95
  • 552 Heavy Duty Thermal Flasher 2-Terminal Auto Turn Signal Hazard Lights 12 Volt
    Features 552 12v Thermal Flasher 32CP MAX 6 12 Volt, 2 pin, 2-6 lamp Thermal design Turn signal DOT approved Previously sold as V552
    • $7.95
    Out of stock
  • Tacoma SS30 Stealth Bracket Kit Diode Dynamics
    Perfect fitment. The Stealth LED Light Bar Kit for the 2016-2019 Toyota Tacoma from Diode Dynamics allows you to easily mount a 30 inch light bar in the factory lower grille opening. These application-specific brackets were CAD-designed to install using factory mounting points. No cutting or drilling required! This kit retains the factory lower grille for a clean, OEM-like appearance. Additionally, if preferred, the lower grille can be modified to make the light bar more visible. Designed For Performance. Using optical simulation modeling, Diode Dynamics Stage Series light bars have been designed for maximum functionality, with compact size, custom-engineered TIR optics, and a useful beam pattern, all in a highly durable package. Our light bars shine light in a highly-functional and useful beam pattern, much more focused than older LEDs on the market. Functional Patterns. All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you! The Driving pattern was designed to supplement your high beams. Rather than a simple spot pattern, the Stage Series Driving pattern has a rectangular 20Wx8H degree pattern that is far more useful for directing light downrange at high speeds. The Flood pattern was designed to provide uniform, even illumination and a full 80Wx50H degree spread of light. Unlike generic flood light optics that are simply a heavily diffused spot, our flood optic is a true optically designed spread, resulting in the biggest spread in the industry! It is perfect for lighting up anything at low speeds, a backup or reverse light, or to light up a worksite. The Combo pattern combines both the Driving and Flood optics. It shines light downrange in a focused, rectangular 20Wx8H degree pattern while also illuminating area around it in a full 80Wx50H degree spread. The Stage Series 30 Inch Combo Light Bar features three driving lenses in the middle with two flood lenses on the outer edges. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.Features Bar Type One (1) Single Row Straight Bar Length 30 Inch Brackets Inluded Yes Direct fitment on 2016 and up Toyota Tacoma Allows you to mount one 30 inch light bar in the lower grille opening CAD-designed for perfect fitment and OEM-like appearance Utilizes existing mounting points for easy installation - no cutting or drilling required Highly durable powdercoated steel construction Plug-and-play wiring harness included to power light bars What's Included In the Box: Two (2) Application-Specific Heavy-Duty Steel Brackets for Installation on 2016 and Up Toyota Tacoma One (1) Heavy Duty Single-Output Harness All Necessary Hardware Installation Guide Quantity: One (1) Warranty: 3 year warranty 100 percent Satisfaction Guarantee Fitment Make: Toyota Model: Tacoma Years: 2016, 2017, 2018, 2019 Electrical Compatibility: No electrical issues (tested and confirmed) Specifications Color Temp (CCT): 2000K, 6000K Beam Angle: Driving, 20 Degree x8 Degree, Combo (Driving and Flood), Flood, 80 Degree x50 Degree Power (watts): 137.2 Operating Voltage: 9-16V Current (amps at 13.2V): 9.8 Bracket Thickness: 12 ga Polarity: Polarity Specific Operating Temperature: -40C to 85C (-40F to 185F) LED Emitter: Luxeon Z ES Connector(s): Deutsch DT Input Materials: Aluminum PCB, Polycarbonate Lens, Aluminum Heatsink Cooling: Passive, heatsink Intrusion Ratings: IP68 Waterproof
    • $79.95
    9 left in stock. Backorder available
  • 18 Inch LED Light Bar Single Row Straight Amber Combo Each Stage Series Diode Dynamics
    Introducing Stage Series LED lighting! Inspired by the needs of a professional rally driver, these light bars have been designed for maximum functionality, with compact size, custom-engineered TIR optics, and a useful beam pattern, all in a highly durable package. Compact. The lightbar is based on a narrow-profile extruded housing, to allow fitment in small and tight areas. At less than 42mm tall, they'll fit in many places a traditional dual-row light bar won't, while cutting total weight as well. The heatsink design also drastically reduces wind noise, and does not whistle in the wind like many generic housings. Focused. The compact size doesn't mean they're short on power! Thanks to the high-intensity Lumileds LED chips, coupled with our U.S. Patent Pending total internal reflection (TIR) optic, the total intensity of the Stage Series is far higher than a standard, generic light bar using basic optics or reflectors. Standard optics lose light internally, and to glare, spreading a little bit of light in every direction. Instead, the TIR optic in the Stage Series collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Functional Patterns. All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you! The Driving pattern was designed to supplement your high beams. Rather than a simple spot pattern, the Stage Series Driving pattern has a rectangular 20Wx8H degree pattern that is far more useful for directing light downrange at high speeds. The Flood pattern was designed to provide uniform, even illumination and a full 80Wx50H degree spread of light. Unlike generic flood light optics that are simply a heavily diffused spot, our flood optic is a true optically designed spread, resulting in the biggest spread in the industry! It is perfect for lighting up anything at low speeds, a backup or reverse light, or to light up a worksite. The Combo pattern combines both the Driving and Flood optics. It shines light downrange in a focused, rectangular 20Wx8H degree pattern while also illuminating area around it in a full 80Wx50H degree spread. The Stage Series 18 Inch Combo Light Bar features a single flood lens in the middle with two driving lenses on the outer edges. Not just off road. In six-inch size, when installed as a pair and aimed in accordance with your state's regulations, the Driving pattern meets SAE J581 as a Driving/Auxiliary High Beam Light, and the Wide pattern meets SAE J583 as a Foglamp, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability. White or Amber. All Stage Series light bars are available in a cool white or amber color. The white is a 6000K color temperature, which is a true white output, without any blue. The amber is a brilliant deep yellow color, perfect for hazards or high contrast in poor weather. Change it up. Each lightbar is based on 6-inch segments. Each segment is sealed with an individual lens and a double-wall seal. This makes them more weather tight than a large, single seal, and it also allows you to change up the outer lens to suit your needs. With just a few screws, you can replace the outer lens with a new one to change the beam pattern or color. Simple connections. All Stage Series LED lighting products use a standard DT type Deutsch-style connector, and come with a 6-inch pigtail, with bare leads. You can wire yourself, use an off-the-shelf Deutsch wire harness, or select an optional Diode Dynamics wire harness. Proven Reliability. Stage Series lighting has been tested for long-term operation from -40 to 185 degrees F, vibration, moisture intrusion, and corrosion. All of these tests are completed to SAE/DOT standards, just like factory components. They've also been put to the test on-road, and are in-use by dozens of rally and endurance racing teams for nighttime stages and laps. Experience. After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly manufacture and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!Features Bar Type One (1) Single Row Straight Bar Length 18 Inch Lens Color Amber Light Pattern Combo Lux 219 Brackets Inluded Yes Advanced TIR optics provide high efficiency and focus High-intensity automotive-type LEDs with pure white color Available in Driving, Flood, or Combo beam patterns Slim 42mm housing for low-profile fitment Durable matte powdercoated extrusion What's Included In the Box: One (1) LED light bar One (1) wire pigtail Universal bracket set Quantity: One (1) Hardware: Two (2) M6 Hex Screws, for main mounting point Two (2) M5 Hex Screws, for rear mounting point Warranty: 8 year warranty 100 percent Satisfaction Guarantee Fitment With the included universal bracket set, this product can be installed on any make or model Specifications Color Temp (CCT): 2000K Beam Angle: Driving, 20 Degree x8 Degree, Combo (Driving and Flood), Flood, 80 Degree x50 Degree Power (watts): 79.8 Operating Voltage: 9-16V Current (amps at 13.2V): 5.7 Polarity: Polarity Specific Operating Temperature: -40C to 85C (-40F to 185F) LED Emitter: Luxeon Z ES Connector(s): Deutsch DT Input Materials: Aluminum PCB, Polycarbonate Lens, Aluminum Heatsink Cooling: Passive, heatsink Intrusion Ratings: IP68 Waterproof
    • $279.95
    9 left in stock. Backorder available

Browse by Vehicle