LED Strip Kits

Products: 12 of 2
  • Bar Billiard Pool Table Bumper LED RGB Color Changing Light Beat To Music Remote
    Set to any color you want to stay on / fade / or flash! or Color Changing LEDS that strobe to the beat of the music!Use your home 110v AC Power (COMES WITH POWER SUPPLY) ON/OFFON SOLID - WITH 16 COLORS TO CHOOSE FROM AND ADJUST BRIGHTNESSSET TO FLASH DIFFERENT COLORS OR SLOW COLOR CHANGE FADESET TO MUSIC MODE TO HAVE LIGHTS BEAT TO THE SOUND OF MUSIC (YOU CAN ADJUST THE SENSITIVITY)FITS ALL POOL TABLE SIZES (6FT, 7FT, 8FT)INCLUDES:LED CONTROLLER WITH MUSIC FUNCTIONIR REMOTERGB (RED, GREEN, BLUE) LED STRIP WITH 3M TAPE ON THE BACKSIDE SO YOU CAN MOUNT ANYWHERE.110V (HOME) POWER SUPPLY This kit of lights for pool tables allows you to have RGB LED lights flash, fade and dance to the beat of music. Plug right into your home wall outlet and have the option of using 3 RGB outputs that allows you to hook three different LED strips. With this kit you have the option to choose between 16 colors to either stay solid, stay solid white, flash, fade, vary brightness, dance to the beat of music (2 settings). This kit comes with a full function Wireless Remote to control the unit. This DIY LED kit is energy efficient and gives off very little heat so it wont damage your felt or cause a fire. This kit can be set up in the bumpers of the table or affixed with the 3M backing to the underside of the table frame to illuminate the legs and floor. Low power, energy efficient, virtually no heat. Controller SpecificationsInput Voltage - 110 volts ACOutput Voltage - 12 volts DCPower (watts) - 60wCurrent (Amps) Output - 5 amp3 Ports (9 ChannelsWidth - 3 inchesLength - 6 inchesHeight - 1-1/8 inches RGB LED SPECIFICATIONS: LED Type5050 SMD LED (Waterproof)Color16 solid colors optionsDifferent lights changing modesFlash, Strobe, Fade, and SmoothLED Quantity30 leds/MeterSizeL500cm (5M) x W1.40cm x T0.40cmPackage5 Meters / ReelView angle120çWorking Input Voltage12VDCWorking Current/meter0.6AOutput power36W /5 MeterLuminous Flux5000-7000 Lumens/MeterWorking Tempreture-20ç to 50çDrive ModeContant VoltagePCB BackgroundWhiteWaterproof IP65 Power supply Adapter 110v/240v AC - 12v DC 4 AmpsCE, GS, TUV, UL Approved4 A Power Output (48 watts) 12v DC1.5 Meter Cable - plus 1.5 Meter Main Cable (3.0m Total)Includes original end connector
    • $99.99
    Backorder available
  • 8Pc BLUE LED Motorcycle Lighting Neon Body Engine Glow Lights Strips Remote Kit
    BLUE SMD LED KIT! This kit allows you to have BLUE LED lights flash, fade, or stay a solid color. 8 PIECE BLUE LED - 12 VOLT WATERPROOF LED LIGHT STRIPS WITH 3M TAPE ON THE BACKSIDE FOR EASY INSTALLATION. INCLUDES WIRELESS REMOTE AND CONTROL UNIT. MOTORCYCLE AMBIENT LIGHTING
    • $54.95
    Backorder available
  • 4X6" Red LED COB Halo Crystal Glass/Metal Headlight H4 6K HID Light Bulb Pair
    OCTANE LIGHTING - 4"x6" DIAMOND CRYSTAL CLEAR GLASS LENS / METAL HOUSING H4 CONVERSION HEADLIGHTS WITH BUILT IN RED COB LED HALO ANGEL EYE RINGS - PAIRHalo rings can be wired into the parking lights, headlights, turn signals, or connected to a separate switch.Extremely Bright Halo Ring! - Day or NightINCLUDES 6000K HIGH INTENSITY DISCHARGE (HID) HI/LOW BI-XENON SLIM BALLAST LIGHT BULB KIT! PAIR - LEFT & RIGHT SIDE New PAIR of 2 Headlamps SAE/DOT Approved - Street Legal3000 Lumen Headlight BrightnessDaylight White Visibility6000k (White Color) AC Slim Ballast 35w Bi-Xenon HID KitHigh & Low Beam FunctionPlugs into Factory Wiring ConnectionBrighter and Whiter than stock headlights High Quality Glass Faced & Metal Backed Semi-Sealed Beam - Removable / Replaceable Light Bulbs Fits cars and trucks with 4x6 rectangle headlightsFits into stock headlight bucketPart number interchange: H4651/H4656/4651/4652Halo is wired separately with power/ground wireExtremely Bright Halo - Visible day or nightDOT / SAE approved THIS LISTING IS FOR A NEW PAIR - 4x6" CRYSTAL CLEAR GLASS LENS / METAL BACKSIDE H4 CONVERSION RED LED HALO HEADLIGHTS. INCLUDES 6000K BI-XENON HI/LOW SUPER BRIGHT WHITE HID KITS. THIS SET INCLUDES (2) HEADLIGHTS, (2) 6K HID BULBS, (2) HID SLIM DIGITAL BALLASTS AND RELAY HARNESSES. THESE HAVE THE ORIGINAL SHAPED PRONGS ON THE BACK SO THEY WILL PLUG RIGHT INTO YOUR ORIGINAL WIRING HARNESS PLUGS. IN RARE CIRCUMSTANCES, WIRING MODIFICATION MAY BE REQUIRED. THIS KIT IS BI-XENON, MEANING YOU WILL HAVE LOW BEAM AND HIGH BEAM FUNCTION WITH THE HID LIGHT KIT. THE HALO IS EXTREMELY BRIGHT AND WIRED SEPARATELY WITH A POWER AND GROUND WIRE. THE HALO CAN BE SPLICED INTO THE PARKING LIGHTS, TURN SIGNAL, IGNITION SOURCE FOR DAYTIME RUNNING LIGHTS, OR TO A SEPARATE SWITCH. THESE ARE FOR ANY CAR OR TRUCK THAT HAS 4 SQUARE 4x6" HEADLIGHTS. DOT / SAE APPROVED.INTERCHANGE: H4651 / H4656 / 4651 / 4652 THESE ARE GLASS AND WE WILL TAKE EXTRA CARE IN PACKAGING. UNRIVALED BRIGHTNESS The Standard for 35w HID Kit 3000 lumen @ 35 watts Ultra Bright HID Kit - 35% brighter than 35w DC Analog HID KitsOctane HID Bulbs - High and Low Beam Function Pushing 3000 Lumens!AC Digital Technology - No Flickering. PERIOD.Waterproof Ballasts - We coat our chips with silicone to ensure maximum protection20 Minute Setup - QuickSnapTM connectors gets you back on the road quicker Why Choose Octane Lighting? We dont cut corners. We pride ourselves on quality and reliability. Every component of this HID kit goes through a series of Quality Assurance Tests to ensure consistent color matching and stable power output. Although many HID companies use similar ballast housings, the internal components are always different and inferior. Trust the original. Trust what lasts. Your Comprehensive HID Conversion Kit Includes: (2) AC Digital 35w Power Ballasts (2) AC Ballast Igniters (2) 35w-Rated HID Bulbs (2) HID Capacitors (1) HID Power Relay Harness (2) Metal Mounting Brackets and Screws (1) Easy-to-Use Installation Instructions Features: AC Series Ballast: 35w Power Output Provides Maximum Light and Cverage Where You Need ItBetter, Brighter, Longer: Octane HID bulbs uses power more efficiently to optimally achieve an ultra-bright 3000 lumens shine while extending the bulbs life to over 3000 hoursPlug-and-Play Installation: Just connect QuickSnap™ connectors, securely lock Octane Lighting bulbs into housing and youre done. No cutting, splicing or headachesComprehensive HID kit that includes a relay harness and capacitors. Everything you need is included!
    • $209.95
  • 7X6" LED HID Light Bulbs Crystal Clear Sealed Beam Headlamp Headlight Pair
    THESE ARE A 7x6 PAIR WHITE HID LED HEADLIGHTS Replaces factory Sealed Beams - Plugs into factory headlight plugsINCLUDES (2) 15-LED DUAL BEAM HEADLIGHT ASSEMBLIESTHIS LISTING IS FOR A PAIR NEW 7x6" CRYSTAL CLEAR LENS - ALUMINUM BACKED HEADLAMP BULBS WITH 15 WHITE LEDs INSIDE THE HOUSING. THIS LISTING IS FOR 2 HEADLIGHTS. THESE WILL FIT ANY CAR OR TRUCK THAT HAS 7X6 or 5x7 INCH HEADLIGHTS. SOME MODIFICATION TO THE HEADLIGHT BUCKET MAY BE REQUIRED, BUT ON MOST CARS THEY ARE PLUG AND PLAY AND WILL ONLY TAKE YOU 15 MINUTES TO INSTALL WITH BASIC HAND TOOLS. WE WILL TAKE EXTRA CARE IN PACKAGING.INTERCHANGE: H6054 / 6054 ITEM SPECIFICS:Power Draw: 12V / 55 WBeam Pattern: Flood Beam/ Spot BeamLight Output: High Beam 3200 lumens per assembly, Low Beam 1550 lumens per assemblyColor Temperature: 5000K, 6000KOperating Voltage: 12V DCOperating Amperage: 3A at 12VWattage: 45WWaterproof Rating: IP68Light: 15 3W LEDsHousing Material: Black AluminumLens Material: Clear Polycarbonate Lens LensHours: 5000+ HoursDimensions: L-3" X W-7" X H-6"
    • $59.95
    Out of stock
  • 7" Blue Halo Ring Angel Eyes 6K 20/40w LED Headlight Headlamp Light Bulbs Pair
    OCTANE LIGHTINGPAIR - New 7" Split Circuit LED Halo Headlights   Blue LED Rings can be Wired to be Daytime Running Lights, Directional Turn Signals or to Come on with the Headlights Includes Super White 6K 20/40w G5 LED Headlight BulbsPAIR - Two Headlights7" Round Crystal Clear Glass LED Headlight w/ Blue LED Halo RingHalo Ring Has Bright LEDs Around Entire HeadlightCrystal Clear Glass Lens6000k 20/40w LED Headlight BulbsLow Beam / High Beam HeadlightHeadlight Plugs Directly into Factory Headlight Wiring Connector PlugSome Modification to the Back of the Headlight Bucket May be RequiredUnique Split Circuit Halo is Wired Separately - Can Be Used As DRL or Left & Right Directional Turn SignalsPart Number Interchange: H6024 / 6014DOT / SAE ApprovedLED BULB SPECIFICATIONS:Bulb Type: - Generation 5 - H4 (9003) LED Low Beam / High Beam Headlight with Canbus Error Canceller PlugsCanbus Error Free Electrical plugs prevent any headlight error codesWattage: 40W / EACH PC Luminous Flux: 8000LM / Set ,4000LM / Each Bulb  Beam Angle: 360°  Placement on Vehicle: Left, Right, FrontColor Temperature: 6000K Pure White
    • $119.95
  • 552 Heavy Duty Thermal Flasher 2-Terminal Auto Turn Signal Hazard Lights 12 Volt
    Features 552 12v Thermal Flasher 32CP MAX 6 12 Volt, 2 pin, 2-6 lamp Thermal design Turn signal DOT approved Previously sold as V552
    • $7.95
    Out of stock
  • Bar Billiard Pool Table Bumper LED RGB Color Changing Light Beat To Music Remote
    Set to any color you want to stay on / fade / or flash! or Color Changing LEDS that strobe to the beat of the music!Use your home 110v AC Power (COMES WITH POWER SUPPLY) ON/OFFON SOLID - WITH 16 COLORS TO CHOOSE FROM AND ADJUST BRIGHTNESSSET TO FLASH DIFFERENT COLORS OR SLOW COLOR CHANGE FADESET TO MUSIC MODE TO HAVE LIGHTS BEAT TO THE SOUND OF MUSIC (YOU CAN ADJUST THE SENSITIVITY)FITS ALL POOL TABLE SIZES (6FT, 7FT, 8FT)INCLUDES:LED CONTROLLER WITH MUSIC FUNCTIONIR REMOTERGB (RED, GREEN, BLUE) LED STRIP WITH 3M TAPE ON THE BACKSIDE SO YOU CAN MOUNT ANYWHERE.110V (HOME) POWER SUPPLY This kit of lights for pool tables allows you to have RGB LED lights flash, fade and dance to the beat of music. Plug right into your home wall outlet and have the option of using 3 RGB outputs that allows you to hook three different LED strips. With this kit you have the option to choose between 16 colors to either stay solid, stay solid white, flash, fade, vary brightness, dance to the beat of music (2 settings). This kit comes with a full function Wireless Remote to control the unit. This DIY LED kit is energy efficient and gives off very little heat so it wont damage your felt or cause a fire. This kit can be set up in the bumpers of the table or affixed with the 3M backing to the underside of the table frame to illuminate the legs and floor. Low power, energy efficient, virtually no heat. Controller SpecificationsInput Voltage - 110 volts ACOutput Voltage - 12 volts DCPower (watts) - 60wCurrent (Amps) Output - 5 amp3 Ports (9 ChannelsWidth - 3 inchesLength - 6 inchesHeight - 1-1/8 inches RGB LED SPECIFICATIONS: LED Type5050 SMD LED (Waterproof)Color16 solid colors optionsDifferent lights changing modesFlash, Strobe, Fade, and SmoothLED Quantity30 leds/MeterSizeL500cm (5M) x W1.40cm x T0.40cmPackage5 Meters / ReelView angle120çWorking Input Voltage12VDCWorking Current/meter0.6AOutput power36W /5 MeterLuminous Flux5000-7000 Lumens/MeterWorking Tempreture-20ç to 50çDrive ModeContant VoltagePCB BackgroundWhiteWaterproof IP65 Power supply Adapter 110v/240v AC - 12v DC 4 AmpsCE, GS, TUV, UL Approved4 A Power Output (48 watts) 12v DC1.5 Meter Cable - plus 1.5 Meter Main Cable (3.0m Total)Includes original end connector
    • $99.99
    Backorder available

Browse by Vehicle