Switches and Buttons

Perfect fitment. The Hood LED Light Bar Kit for the 2020 Jeep Gladiator from Diode Dynamics allows you to easily mount a 50 Inch light bar across the hood. These application-specific brackets were CAD-designed to install using factory mounting points. No cutting or drilling required! When installed along with our fully-customizable Gladiator Cowl Mount Brackets, you can easily mount multiple pods on either side of the 50 Inch light bar as well.Low profile. These L-shaped brackets were designed in-house specifically for our Stage Series light bar. They were designed to be low profile and won't block visibility while driving or block the wiper nozzles. This also means you won't hear whistling or major wind noise like you may have experienced with other light bar brackets.Not your average hardware. The hardware included with this kit is OEM-style, automotive grade hardware. This hardware isn't from the hardware store - it was custom designed for this kit with integrated washers and the same OEM finish as the factory hardware. The Delrin spacers are long-lasting and won't wear over time.Control through aux switch bank. Included with the full light bar kit is our new OEM Auxiliary Switch Dual-Output Wiring Harness. This harness allows you to control your auxiliary lighting using the factory-installed aux switch bank. For those who don't have the aux switch bank, our Heavy Duty Dual-Output Wiring Harness is also included to mount a switch and connect directly to the battery.Designed for performance. You may think that you'll get lots of glare from light bouncing off the hood. However, thanks to custom-engineering TIR optics, Diode Dynamics Stage Series LED light bars shine light in a highly-functional and useful beam pattern, much more focused than older LEDs on the market. The Driving optic easily shines right over the hood, even with the low mounting position.Functional Patterns. All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you!The Driving pattern was designed to supplement your high beams. Rather than a simple spot pattern, the Stage Series Driving pattern has a rectangular 20Wx8H degree pattern that is far more useful for directing light downrange at high speeds.The Flood pattern was designed to provide uniform, even illumination and a full 80Wx50H degree spread of light. Unlike generic flood light optics that are simply a heavily diffused spot, our flood optic is a true optically designed spread, resulting in the biggest spread in the industry! It is perfect for lighting up anything at low speeds, a backup or reverse light, or to light up a worksite.The Combo pattern combines both the Driving and Flood optics. It shines light downrange in a focused, rectangular 20Wx8H degree pattern while also illuminating area around it in a full 80Wx50H degree spread. The Stage Series 50 Inch Combo Light Bar features six driving lenses in the middle with two flood lenses on the outer edges.Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.FeaturesCAD-designed for perfect fitment on 2020 Jeep GladiatorAllows you to mount one 50 Inch light bar across the hoodDesigned to eliminate excess wind noiseIncludes OEM-style automotive grade hardware designed specifically for this kitUtilizes existing mounting points for easy installation - no cutting or drilling requiredHighly durable powdercoated steel constructionControl through factory aux switch bank using the included harnessWhat's Included In the Box:Brackets Only:Two (2) Application-specific hood bracketsFour (4) Delrin spacersFour (4) OEM-style automotive grade boltsInstallation GuideQuantity: Pair (Left and Right Side)Warranty: 3 year warranty100 percent Satisfaction GuaranteeFitmentThis kit is compatible with all Sport, Sport S, Overland, and Rubicon trim levelsMake: JeepModel: GladiatorYears: 2020Electrical Compatibility: No electrical issues (tested and confirmed)

Perfect fitment. The Cowl Mount LED Light Bar Kit for the 2018-2019 Jeep Wrangler from Diode Dynamics allows you to easily mount just about any auxiliary lighting you can think of. These application-specific brackets were CAD-designed to install using factory mounting points. No cutting or drilling required! They also feature a low profile design, which eliminates excess whistling or major wind noise.Endless mounting options. These brackets were designed with a variety of different mounting points for endless mounting options. You can mount multiple pods, a larger worklight, or even a small light bar to achieve the look you're after! There are even slots on the side of the bracket to mount ditch lights. When standard pods are installed on the outer slot, you can fold the windshield down without removing your auxiliary lighting. When installed along with our JL Wrangler Hood Light Bar Kit, you can easily mount a 50 Inch Stage Series light bar across the hood as well.Not your average hardware. The hardware included with this kit is OEM-style, automotive grade hardware. This hardware isn't from the hardware store - it was custom designed for this kit with integrated washers and the same OEM finish as the factory hardware. The Delrin spacers are long-lasting and won't wear over time.Control through aux switch bank. Included with the full light bar kit is our new OEM Auxiliary Switch Dual-Output Wiring Harness. This harness allows you to control your auxiliary lighting using the factory-installed aux switch bank. For those who don't have the aux switch bank, our Light Duty Dual-Output Wiring Harness is also included to mount a switch and connect directly to the battery.Designed for performance. Using optical simulation modeling, Diode Dynamics Stage Series LED light bars have been designed for maximum functionality, with compact size, custom-engineered TIR optics, and a useful beam pattern, all in a highly durable package. Our light bars shine light in a highly-functional and useful beam pattern, much more focused than older LEDs on the market.Functional Patterns. All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you!The Driving pattern was designed to supplement your high beams. Rather than a simple spot pattern, the Stage Series Driving pattern has a rectangular 20Wx8H degree pattern that is far more useful for directing light downrange at high speeds.The Flood pattern was designed to provide uniform, even illumination and a full 80Wx50H degree spread of light. Unlike generic flood light optics that are simply a heavily diffused spot, our flood optic is a true optically designed spread, resulting in the biggest spread in the industry! It is perfect for lighting up anything at low speeds, a backup or reverse light, or to light up a worksite.Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.FeaturesJeep 2018-2019 SS6 Cowl LED Kit White DrivingCAD-designed for perfect fitment on 2018 and Up Jeep JL WranglerFeatures multiple mounting points for endless mounting optionsCompatible with any pod, worklight, or small light barWhen a set of standard pods is mounted on the outer slot, they allow you to still fold down the windshieldIncludes OEM-style automotive grade hardware designed specifically for this kitUtilizes existing mounting points for easy installation - no cutting or drilling requiredHighly durable powdercoated steel constructionWhat's Included In the Box:Cowl Mount Bracket Light Bar Kit:Two (2) Application-specific cowl mount brackets for installation on 2018-2019 Jeep WranglerTwo (2) U-bracketsTwo (2) SS6 Stage Series 6 Inch Light BarsOne (1) OEM Auxillary Switch Dual-Output HarnessOne (1) Light Duty Dual-Output HarnessSix (6) Delrin spacersSix (6) OEM-style automotive grade boltsInstallation GuideQuantity: Pair (Left and Right Side)Warranty: 3 year warrantyReturn Policy: 30-day Return with no restocking fee100 percent Satisfaction GuaranteeFitmentThis kit is compatible with all Sport, Sport S, Sahara, and Rubicon trim levelsMake: JeepModel: WranglerYears: 2018, 2019Electrical Compatibility: No electrical issues (tested and confirmed)SpecificationsIntensity at 10m: 470 lux (Driving)Raw Output: 2280 lumensMeasured Lumens: 1400Intensity (cd): 47,000Color Temp (CCT): 2000K, 6000KBeam Angle: Driving, 20 Degree x8 Degree, Flood, 80 Degree x50 DegreePower (watts): 26.6Operating Voltage: 9-16VCurrent (amps at 13.2V): 1.9Bracket Thickness: 10 gaPolarity: Polarity SpecificOperating Temperature: -40C to 85C (-40F to 185F)LED Emitter: Luxeon Z ESConnector(s): Deutsch DT InputMaterials: Aluminum PCB, Polycarbonate Lens, Aluminum HeatsinkCooling: Passive, heatsinkIntrusion Ratings: IP68 Waterproof

Perfect fitment. The Cowl Mount LED Light Bar Kit for the 2018-2019 Jeep Wrangler from Diode Dynamics allows you to easily mount just about any auxiliary lighting you can think of. These application-specific brackets were CAD-designed to install using factory mounting points. No cutting or drilling required! They also feature a low profile design, which eliminates excess whistling or major wind noise.Endless mounting options. These brackets were designed with a variety of different mounting points for endless mounting options. You can mount multiple pods, a larger worklight, or even a small light bar to achieve the look you're after! There are even slots on the side of the bracket to mount ditch lights. When standard pods are installed on the outer slot, you can fold the windshield down without removing your auxiliary lighting. When installed along with our JL Wrangler Hood Light Bar Kit, you can easily mount a 50 Inch Stage Series light bar across the hood as well.Not your average hardware. The hardware included with this kit is OEM-style, automotive grade hardware. This hardware isn't from the hardware store - it was custom designed for this kit with integrated washers and the same OEM finish as the factory hardware. The Delrin spacers are long-lasting and won't wear over time.Control through aux switch bank. Included with the full light bar kit is our new OEM Auxiliary Switch Dual-Output Wiring Harness. This harness allows you to control your auxiliary lighting using the factory-installed aux switch bank. For those who don't have the aux switch bank, our Light Duty Dual-Output Wiring Harness is also included to mount a switch and connect directly to the battery.Designed for performance. Using optical simulation modeling, Diode Dynamics Stage Series LED light bars have been designed for maximum functionality, with compact size, custom-engineered TIR optics, and a useful beam pattern, all in a highly durable package. Our light bars shine light in a highly-functional and useful beam pattern, much more focused than older LEDs on the market.Functional Patterns. All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you!The Driving pattern was designed to supplement your high beams. Rather than a simple spot pattern, the Stage Series Driving pattern has a rectangular 20Wx8H degree pattern that is far more useful for directing light downrange at high speeds.The Flood pattern was designed to provide uniform, even illumination and a full 80Wx50H degree spread of light. Unlike generic flood light optics that are simply a heavily diffused spot, our flood optic is a true optically designed spread, resulting in the biggest spread in the industry! It is perfect for lighting up anything at low speeds, a backup or reverse light, or to light up a worksite.Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.FeaturesJeep 2018-2019 SS6 Cowl LED Kit White FloodCAD-designed for perfect fitment on 2018 and Up Jeep JL WranglerFeatures multiple mounting points for endless mounting optionsCompatible with any pod, worklight, or small light barWhen a set of standard pods is mounted on the outer slot, they allow you to still fold down the windshieldIncludes OEM-style automotive grade hardware designed specifically for this kitUtilizes existing mounting points for easy installation - no cutting or drilling requiredHighly durable powdercoated steel constructionWhat's Included In the Box:Cowl Mount Bracket Light Bar Kit:Two (2) Application-specific cowl mount brackets for installation on 2018-2019 Jeep WranglerTwo (2) U-bracketsTwo (2) SS6 Stage Series 6 Inch Light BarsOne (1) OEM Auxillary Switch Dual-Output HarnessOne (1) Light Duty Dual-Output HarnessSix (6) Delrin spacersSix (6) OEM-style automotive grade boltsInstallation GuideQuantity: Pair (Left and Right Side)Warranty: 3 year warrantyReturn Policy: 30-day Return with no restocking fee100 percent Satisfaction GuaranteeFitmentThis kit is compatible with all Sport, Sport S, Sahara, and Rubicon trim levelsMake: JeepModel: WranglerYears: 2018, 2019Electrical Compatibility: No electrical issues (tested and confirmed)SpecificationsIntensity at 10m: 470 lux (Driving)Raw Output: 2280 lumensMeasured Lumens: 1400Intensity (cd): 47,000Color Temp (CCT): 2000K, 6000KBeam Angle: Driving, 20 Degree x8 Degree, Flood, 80 Degree x50 DegreePower (watts): 26.6Operating Voltage: 9-16VCurrent (amps at 13.2V): 1.9Bracket Thickness: 10 gaPolarity: Polarity SpecificOperating Temperature: -40C to 85C (-40F to 185F)LED Emitter: Luxeon Z ESConnector(s): Deutsch DT InputMaterials: Aluminum PCB, Polycarbonate Lens, Aluminum HeatsinkCooling: Passive, heatsinkIntrusion Ratings: IP68 Waterproof

Perfect fitment. The Cowl Mount LED Light Bar Kit for the 2018-2019 Jeep Wrangler from Diode Dynamics allows you to easily mount just about any auxiliary lighting you can think of. These application-specific brackets were CAD-designed to install using factory mounting points. No cutting or drilling required! They also feature a low profile design, which eliminates excess whistling or major wind noise.Endless mounting options. These brackets were designed with a variety of different mounting points for endless mounting options. You can mount multiple pods, a larger worklight, or even a small light bar to achieve the look you're after! There are even slots on the side of the bracket to mount ditch lights. When standard pods are installed on the outer slot, you can fold the windshield down without removing your auxiliary lighting. When installed along with our JL Wrangler Hood Light Bar Kit, you can easily mount a 50 Inch Stage Series light bar across the hood as well.Not your average hardware. The hardware included with this kit is OEM-style, automotive grade hardware. This hardware isn't from the hardware store - it was custom designed for this kit with integrated washers and the same OEM finish as the factory hardware. The Delrin spacers are long-lasting and won't wear over time.Control through aux switch bank. Included with the full light bar kit is our new OEM Auxiliary Switch Dual-Output Wiring Harness. This harness allows you to control your auxiliary lighting using the factory-installed aux switch bank. For those who don't have the aux switch bank, our Light Duty Dual-Output Wiring Harness is also included to mount a switch and connect directly to the battery.Designed for performance. Using optical simulation modeling, Diode Dynamics Stage Series LED light bars have been designed for maximum functionality, with compact size, custom-engineered TIR optics, and a useful beam pattern, all in a highly durable package. Our light bars shine light in a highly-functional and useful beam pattern, much more focused than older LEDs on the market.Functional Patterns. All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you!The Driving pattern was designed to supplement your high beams. Rather than a simple spot pattern, the Stage Series Driving pattern has a rectangular 20Wx8H degree pattern that is far more useful for directing light downrange at high speeds.The Flood pattern was designed to provide uniform, even illumination and a full 80Wx50H degree spread of light. Unlike generic flood light optics that are simply a heavily diffused spot, our flood optic is a true optically designed spread, resulting in the biggest spread in the industry! It is perfect for lighting up anything at low speeds, a backup or reverse light, or to light up a worksite.Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.FeaturesJeep 2018-2019 SS6 Cowl LED Kit Amber DrivingCAD-designed for perfect fitment on 2018 and Up Jeep JL WranglerFeatures multiple mounting points for endless mounting optionsCompatible with any pod, worklight, or small light barWhen a set of standard pods is mounted on the outer slot, they allow you to still fold down the windshieldIncludes OEM-style automotive grade hardware designed specifically for this kitUtilizes existing mounting points for easy installation - no cutting or drilling requiredHighly durable powdercoated steel constructionWhat's Included In the Box:Cowl Mount Bracket Light Bar Kit:Two (2) Application-specific cowl mount brackets for installation on 2018-2019 Jeep WranglerTwo (2) U-bracketsTwo (2) SS6 Stage Series 6 Inch Light BarsOne (1) OEM Auxillary Switch Dual-Output HarnessOne (1) Light Duty Dual-Output HarnessSix (6) Delrin spacersSix (6) OEM-style automotive grade boltsInstallation GuideQuantity: Pair (Left and Right Side)Warranty: 3 year warrantyReturn Policy: 30-day Return with no restocking fee100 percent Satisfaction GuaranteeFitmentThis kit is compatible with all Sport, Sport S, Sahara, and Rubicon trim levelsMake: JeepModel: WranglerYears: 2018, 2019Electrical Compatibility: No electrical issues (tested and confirmed)SpecificationsIntensity at 10m: 470 lux (Driving)Raw Output: 2280 lumensMeasured Lumens: 1400Intensity (cd): 47,000Color Temp (CCT): 2000K, 6000KBeam Angle: Driving, 20 Degree x8 Degree, Flood, 80 Degree x50 DegreePower (watts): 26.6Operating Voltage: 9-16VCurrent (amps at 13.2V): 1.9Bracket Thickness: 10 gaPolarity: Polarity SpecificOperating Temperature: -40C to 85C (-40F to 185F)LED Emitter: Luxeon Z ESConnector(s): Deutsch DT InputMaterials: Aluminum PCB, Polycarbonate Lens, Aluminum HeatsinkCooling: Passive, heatsinkIntrusion Ratings: IP68 Waterproof