Products: 6172 of 3368
You are on page 6, click to load from start
  • 14-15 GMC Sierra RGBW LED Color Changing Headlight DRL Accent Bars Bluetooth Set
    Diode Dynamics2014-2015 GMC Sierra RGBW LED Color Changing Headlight Accent Bars w/ Bluetooth SetNew Set of 14-15 GMC Sierra RGBW LED Multi-Color Changing Headlight Accent PanelsRGBW Bluetooth Color-Changing Controller IncludedSet Covers Both Left & Right Side Accent LightsLED Panels are Installed Over Current Accent Bar BoardsPanels Feature Multi-Color Changing RGBW LED BulbsRGBW LED Bulbs Allow You To Maintain the Pure White Factory Color for Everyday UseFeatures an Additional 5 Colors - Red, Green, Blue, Purple & CyanConstant-Current, Waterproof Inductive Drivers Included for Long Term ReliabilityController Compatible w/ iOS & Android SystemsCreate Any Color You WantCustomize & Save Colors & Patterns, Strobe, Flashing, Camera Match & Music Sync All Featured in App3-Year Manufacturer WarrantyMade in USAQty: 1 (One) Set of LED Boards & One ControllerWarranty: 3 Year Replacement Limited WarrantyAll Diode Dynamics products come with a 3 Year Worry-Free Warranty.Description: The GMC Sierra has two LED accent bars in the headlights. They are illuminated by circuit boards that hold white LEDs. Our replacement LED boards utilize RGBW LEDs instead! The RGB function allows for full multicolor control using any standard RGB controller, to accent the look of your Sierra and make it stand out on the road. This product is not just RGB though- it is RGBW! That means there is an LED chip that is specifically white in color, right next to the standard red, green, and blue chips. By using an RGBW controller rather than the standard RGB, you can activate and control the white chip independently of the colors. This provides a much more uniform, pure, and bright white color than the traditional method of combining all RGB signals, so you can keep a clean, factory white appearance for everyday driving. With this setup, both LED bars will be on at the same time, instead of just one or the other. You don't have to align and fasten LEDs by hand- this is an OEM-grade solution, with exact fitment, and perfect alignment of the new LEDs. Just remove the factory boards, and ours fit directly in place. Your order includes two sets of LED boards, one for each side. To drive the high-power LEDs safely, a new constant-current, waterproof, inductive driver is included for each set. You will also need a standard RGB or RGBW controller. Controllers can usually be powered by any standard 12V source. We recommend connecting to the parking light signal, so this module lights up when the parking lights or headlights are on. Remember, when you're not showing off, you can set the LEDs to pure white for everyday use. Professional installation is strongly recommended, as the factory headlights must be opened in order to replace the LED panels. Wiring instructions are included to identify the wire colors required to power your controller. All Diode Dynamics products are backed by a 3-year replacement warranty.  Made in USA by Diode Dynamics Manufacturing. View Installation Guide (.pdf) Bluetooth RGBW Controller Full multicolor control, or True White for everyday driving20 adjustable patterns, plus custom modes, camera match, and audio syncEasily group multiple controllers for multi-zone controlFully waterproof and shockproof Overview Full RGBW. Full multicolor, with no sacrifice. Unlike other RGB controllers on the market that produce a mixed white color, this controller is full RGBW, with an independent White channel. After you have fun with colors, just select True White for a crisp, clean white output for everyday use. App Control. With the Diode Dynamics multicolor app, you can of course choose any color under the sun, including True White. There's preset patterns too, including strobe, fade, and more. But it's the extras that really make this controller special. Simple features like Preset Colors make it easy to use, and fun features like Camera Match and Music Sync make it fun to show off! Don't see a pattern you like? Just program your own, and save it for later! This controller is the most fully-featured in terms of control and features on the market. Instant Function. Don't wait around to see your lights. This controller will light up immediately to the previous setting when it gets power, no need to access the app. And connecting to the controller takes seconds, not minutes. Instant response, instant control, for an excellent user experience. Get a Few. If you have more than one RGBW device, consider picking up an extra controller. The Group feature allows you to connect and control multiple units in the same app, controlling them all at once (Grouped) or selecting one at a time, in a multizone setup. Even pick names so you can keep track of what's what, and really show off what your lights can do. Up to eight controllers can be accessed in one app session. Purpose-Built. Introducing the only RGBW controller on the market that is purpose-built for automotive LEDs. Made in USA, it is designed to handle standard automotive power, and will power any common-positive 12V RGBW lighting products. With a fully-waterproof, durable potting, and robust components allowing up to 3A output per channel, this is the most reliable, low-cost RGBW controller on the market! Easy Connection. With plug-and-play input and output connectors, simply plug in to any standard 12V signal - we recommend parking lights or direct battery. Then, connect the outputs directly to your Diode Dynamics multicolor products, with no cutting, crimping, or splicing. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project! Installation Guide: Click to download
    • $230.00
    Backorder available
  • 14-15 GMC Sierra RGBW LED Color Changing Headlight DRL Accent Bars Bluetooth Set
    Diode Dynamics2014-2015 GMC Sierra RGBW LED Color Changing Headlight Accent Bars w/ Bluetooth SetNew Set of 14-15 GMC Sierra RGBW LED Multi-Color Changing Headlight Accent PanelsRGBW Bluetooth Color-Changing Controller IncludedSet Covers Both Left & Right Side Accent LightsLED Panels are Installed Over Current Accent Bar BoardsPanels Feature Multi-Color Changing RGBW LED BulbsRGBW LED Bulbs Allow You To Maintain the Pure White Factory Color for Everyday UseFeatures an Additional 5 Colors - Red, Green, Blue, Purple & CyanConstant-Current, Waterproof Inductive Drivers Included for Long Term ReliabilityController Compatible w/ iOS & Android SystemsCreate Any Color You WantCustomize & Save Colors & Patterns, Strobe, Flashing, Camera Match & Music Sync All Featured in App3-Year Manufacturer WarrantyMade in USAQty: 1 (One) Set of LED Boards & One ControllerWarranty: 3 Year Replacement Limited WarrantyAll Diode Dynamics products come with a 3 Year Worry-Free Warranty.Description: The GMC Sierra has two LED accent bars in the headlights. They are illuminated by circuit boards that hold white LEDs. Our replacement LED boards utilize RGBW LEDs instead! The RGB function allows for full multicolor control using any standard RGB controller, to accent the look of your Sierra and make it stand out on the road. This product is not just RGB though- it is RGBW! That means there is an LED chip that is specifically white in color, right next to the standard red, green, and blue chips. By using an RGBW controller rather than the standard RGB, you can activate and control the white chip independently of the colors. This provides a much more uniform, pure, and bright white color than the traditional method of combining all RGB signals, so you can keep a clean, factory white appearance for everyday driving. With this setup, both LED bars will be on at the same time, instead of just one or the other. You don't have to align and fasten LEDs by hand- this is an OEM-grade solution, with exact fitment, and perfect alignment of the new LEDs. Just remove the factory boards, and ours fit directly in place. Your order includes two sets of LED boards, one for each side. To drive the high-power LEDs safely, a new constant-current, waterproof, inductive driver is included for each set. You will also need a standard RGB or RGBW controller. Controllers can usually be powered by any standard 12V source. We recommend connecting to the parking light signal, so this module lights up when the parking lights or headlights are on. Remember, when you're not showing off, you can set the LEDs to pure white for everyday use. Professional installation is strongly recommended, as the factory headlights must be opened in order to replace the LED panels. Wiring instructions are included to identify the wire colors required to power your controller. All Diode Dynamics products are backed by a 3-year replacement warranty.  Made in USA by Diode Dynamics Manufacturing. View Installation Guide (.pdf) Bluetooth RGBW Controller Full multicolor control, or True White for everyday driving20 adjustable patterns, plus custom modes, camera match, and audio syncEasily group multiple controllers for multi-zone controlFully waterproof and shockproof Overview Full RGBW. Full multicolor, with no sacrifice. Unlike other RGB controllers on the market that produce a mixed white color, this controller is full RGBW, with an independent White channel. After you have fun with colors, just select True White for a crisp, clean white output for everyday use. App Control. With the Diode Dynamics multicolor app, you can of course choose any color under the sun, including True White. There's preset patterns too, including strobe, fade, and more. But it's the extras that really make this controller special. Simple features like Preset Colors make it easy to use, and fun features like Camera Match and Music Sync make it fun to show off! Don't see a pattern you like? Just program your own, and save it for later! This controller is the most fully-featured in terms of control and features on the market. Instant Function. Don't wait around to see your lights. This controller will light up immediately to the previous setting when it gets power, no need to access the app. And connecting to the controller takes seconds, not minutes. Instant response, instant control, for an excellent user experience. Get a Few. If you have more than one RGBW device, consider picking up an extra controller. The Group feature allows you to connect and control multiple units in the same app, controlling them all at once (Grouped) or selecting one at a time, in a multizone setup. Even pick names so you can keep track of what's what, and really show off what your lights can do. Up to eight controllers can be accessed in one app session. Purpose-Built. Introducing the only RGBW controller on the market that is purpose-built for automotive LEDs. Made in USA, it is designed to handle standard automotive power, and will power any common-positive 12V RGBW lighting products. With a fully-waterproof, durable potting, and robust components allowing up to 3A output per channel, this is the most reliable, low-cost RGBW controller on the market! Easy Connection. With plug-and-play input and output connectors, simply plug in to any standard 12V signal - we recommend parking lights or direct battery. Then, connect the outputs directly to your Diode Dynamics multicolor products, with no cutting, crimping, or splicing. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project! Installation Guide: Click to download
    • $280.00
    5 left in stock.
  • 14-18 Cadillac ATS/CTS Front Fender LED Clear Side Marker Set Diode Dynamics
    Diode Dynamics15-16-17-18 Cadillac ATS / 14-15-16-17-18 Cadillac CTS Front Side Amber SMD LED Clear Marker Light Lens Set   New Amber LED Clear Front Side Marker Lamp Lenses - PAIR For 2015-2016-2017-2018 Cadillac ATS / 2014-2015-2016-2017-2018 Cadillac CTS (Non V Models) Fits Left (Driver) & Right (Passenger) Sides Plug & Play - No Tools Required Optical Reflector Pattern and LED Focal Strip Powerful SMD LEDs with Constant-Current Driver Non-Polar Input for Hassle-Free Installation High Reliability with Embedded Transient Voltage Suppression Ultrasonically Welded for OEM Longevity DOT/SAE Compliant Output and Assembly  100% Made in USA 3 Year Manufacturer Warranty We Also Have These Lenses Available in Amber & Smoked Qty: 2 (Two) Lenses Description Diode Dynamics is pleased to announce the replacement LED Sidemarker set, for 2015+ Cadillac ATS (non V) and 2014+ Cadillac CTS (non V models). With these sidemarkers, you'll gain a modern LED appearance, with a simple 15-minute installation. Upgrade your ATS today! These sidemarkers are sold in a pair and light up with Amber LEDs. The lens options include factory-style Amber, Clear, or Smoked. Key features include: - Amber, clear, and smoked lens options - Plug and play, simple tools required - Optical reflector pattern and LED focal strip - Powerful SMD LEDs with constant-current driver - Non-polar input, for hassle-free installation - High reliability with embedded transient voltage suppression - Ultrasonically welded for OEM longevity - DOT/SAE compliant output and assembly (red/amber lens) - 100% Made in USA All Diode Dynamics products are backed by a 3-year replacement warranty.   What's Included Quantity: Two (2) Warranty: 3 year warranty 100% Satisfaction Guarantee Installation Guide: Click to download
    • $99.95
    3 left in stock. Backorder available
  • 14-18 Chevy Corvette RGBW LED Multi-Color Headlight Accent DRL w/ Bluetooth Set
    Diode Dynamics2014-2015-2016-2017-2018 Chevy Corvette RGBW LED Color Changing Headlight Accent Bars w/ Bluetooth SetNew Set of 14-15-16-17-18 Chevrolet C7 Corvette RGBW LED Multi-Color Changing Headlight Accent PanelsRGBW Bluetooth Color-Changing Controller IncludedSet Covers Both Left & Right Side Accent LightsLED Panels Replace Factory Accent Bar BoardsPanels Feature Multi-Color Changing RGBW LED BulbsRGBW LED Bulbs Allow You To Maintain the Pure White Factory Color for Everyday UseFeatures an Additional 5 Colors - Red, Green, Blue, Purple & CyanConstant-Current, Waterproof Inductive Drivers Included for Long Term ReliabilityController Compatible w/ iOS & Android SystemsCreate Any Color You WantCustomize & Save Colors & Patterns, Strobe, Flashing, Camera Match & Music Sync All Featured in App3-Year Manufacturer WarrantyMade in USAQty: 1 (One) Set of LED Boards & One ControllerWarranty: 3 Year Replacement Limited WarrantyAll Diode Dynamics products come with a 3 Year Worry-Free Warranty.Description: The 2014+ Corvette has a white LED accent in the headlights. It is illuminated by a set of circuit boards that hold white LEDs. Our replacement LED boards utilize RGBW LEDs instead! The RGB function allows for full multicolor control using any standard RGB controller, to accent the look of your Corvette and make it stand out on the road. This product is not just RGB though- it is RGBW! That means there is an LED chip that is specifically white in color, right next to the standard red, green, and blue chips. By using an RGBW controller rather than the standard RGB, you can activate and control the white chip independently of the colors. This provides a much more uniform, pure, and bright white color than the traditional method of combining all RGB signals, so you can keep a clean, factory white appearance for everyday driving. You don't have to align and fasten LEDs by hand- this is an OEM-grade solution, with exact fitment, and perfect alignment of the new LEDs. Just remove the factory boards, and ours fit directly in place. Your order includes two sets of LED boards, one for each side. To drive the high-power LEDs safely, a new constant-current, waterproof, inductive driver is included for each set. You will also need a standard RGB or RGBW controller. Controllers can usually be powered by any standard 12V source. We recommend connecting to the parking light signal, so this module lights up when the parking lights or headlights are on. Remember, when you're not showing off, you can set the LEDs to pure white for everyday use. Professional installation is strongly recommended, as the factory headlights must be opened in order to replace the LED panels. Wiring instructions are included to identify the wire colors required to power your controller. All Diode Dynamics products are backed by a 3-year replacement warranty.  Made in USA by Diode Dynamics Manufacturing.Installation: Click to Download Installation Guide (.pdf) Bluetooth RGBW Controller Full multicolor control, or True White for everyday driving20 adjustable patterns, plus custom modes, camera match, and audio syncEasily group multiple controllers for multi-zone controlFully waterproof and shockproof Overview Full RGBW. Full multicolor, with no sacrifice. Unlike other RGB controllers on the market that produce a mixed white color, this controller is full RGBW, with an independent White channel. After you have fun with colors, just select True White for a crisp, clean white output for everyday use. App Control. With the Diode Dynamics multicolor app, you can of course choose any color under the sun, including True White. There's preset patterns too, including strobe, fade, and more. But it's the extras that really make this controller special. Simple features like Preset Colors make it easy to use, and fun features like Camera Match and Music Sync make it fun to show off! Don't see a pattern you like? Just program your own, and save it for later! This controller is the most fully-featured in terms of control and features on the market. Instant Function. Don't wait around to see your lights. This controller will light up immediately to the previous setting when it gets power, no need to access the app. And connecting to the controller takes seconds, not minutes. Instant response, instant control, for an excellent user experience. Get a Few. If you have more than one RGBW device, consider picking up an extra controller. The Group feature allows you to connect and control multiple units in the same app, controlling them all at once (Grouped) or selecting one at a time, in a multizone setup. Even pick names so you can keep track of what's what, and really show off what your lights can do. Up to eight controllers can be accessed in one app session. Purpose-Built. Introducing the only RGBW controller on the market that is purpose-built for automotive LEDs. Made in USA, it is designed to handle standard automotive power, and will power any common-positive 12V RGBW lighting products. With a fully-waterproof, durable potting, and robust components allowing up to 3A output per channel, this is the most reliable, low-cost RGBW controller on the market! Easy Connection. With plug-and-play input and output connectors, simply plug in to any standard 12V signal - we recommend parking lights or direct battery. Then, connect the outputs directly to your Diode Dynamics multicolor products, with no cutting, crimping, or splicing. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project! Installation Guide: Click to download
    • $260.00
  • 15-16-17 Ford Mustang LED Switchback DRL Headlight Accent Board USDM Kit
    Diode Dynamics2015-2016-2017 Ford Mustang LED Switchback Headlight DRL Accent Board PairNew PAIR of Diode Dynamics LED Switchback Headlight Accent BoardsFits 15-16-17 Ford Mustang (USA Models Only)Computer-Designed LED DRL Boards for 2015-2017 Ford Mustang HeadlightsBoards Contain 2x More LED Than Factory BoardsHuge Increase in Brightness, Even in Direct SunlightTwo Epistar LEDs in Place of Each Original White ChipWaterproof Drivers IncludedEasily Adds Styling to Your Mustang!These Will Not Work w/ Aftermarket Headlight AssembliesQty: 2 (Two) LED Boards w/ Drivers & WiringItem #DD2115 What's IncludedTwo (2) sets of LED boards, left and rightTwo (2) waterproof driversTwo (2) input wire pigtails with T-tapsInstallation guide Time for an upgrade! From the factory, the Ford Mustang has LED accents in the headlight that illuminate in a white color, for the parking light and DRL. Diode Dynamics replacement LED boards add a brighter DRL along with a sequential amber turn signal for a custom, yet functional look. Your order includes two sets of LED boards, one for each side of the vehicle.  Sequencing Turn Signal. These LED boards are a direct replacement for the factory ones, but have double the number of LEDs. They illuminate white for your parking lights and DRLs, with a dimmed power level at night. Anytime you hit your turn signal, they light up in a sequencing amber pattern, just like the factory tail lights, to indicate signaling. While the amber is extremely bright, we do not recommend disabling your factory turn signal.  USDM vs EU/AU. There's a few differences between Mustangs in different regions of the world, so we've developed two versions of the Switchback Sequencing kit to accommodate this. First, if you're in Europe or Australia, you probably know that your tribars aren't lit up at all! This kit will still fit directly in place - the mounting points are all there in your headlights, you're just missing the circuit boards. The sequential function is also a bit different: The US-market Mustang has a slower blink rate, to leave time for the taillights to sequence across. The drivers with the USDM option are designed to match this slower blink rate. EU/AU Mustangs have a standard blink rate, so the sequencing is faster to accommodate this.  OEM-grade design. At Diode Dynamics, we work directly from OEM data, and use a 3D scanner, to develop precise replacement boards with identical mounting points and shape. Just remove the original boards, and ours will fit directly in place with correct alignment. You'll also see OEM design features, such as high-intensity automotive emitters, wire connectors, and serial numbers for quality assurance. Works correctly, with no surprises. In 2014, Diode Dynamics was the first to make replacement circuit boards. Our goal is to make them work just like the factory system - except for added functionality! That means connecting to the factory DRL and running light signals for proper operation. This isn't as easy as it sounds - on the Ford Mustang, all functions are powered through the vehicle's computer, rather than traditional relays. If the vehicle doesn't see the power draw it expects, it disables the signal. Many of our competitors skip the factory signals, instructing customers to connect power to the battery, and manually turn the LEDs off and on every time they're used. Not ideal! To provide an upgrade without disabling the factory functions, our engineers spent hours with our own Mustang, and consulted with Mustang owners overseas in order to tune the drivers correctly. They pull enough power to light up the boards brightly, with the factory functions, but do not cause any errors with the vehicle's computer. The included instructions show you exactly which wires to connect to, for no guesswork. Everything works perfectly, with no errors: there's no need to sacrifice factory function with Diode Dynamics products! Optically correct. Unlike strips or halos, replacement boards work in conjunction with factory optics in your headlight. Since the factory setup uses only one white chip, it can be difficult to align the light properly from both replacement emitters. To save cost, other brands often use low-cost generic chips, which cannot focus light properly. This creates odd appearances, as some sections are brighter than others. Diode Dynamics uses high-intensity automotive emitters to direct light properly to the factory optic, and all designs are tested a number of times with small adjustments to make sure the setup is optimized. Even a 0.1mm change can make a big difference, and Diode Dynamics products are carefully tuned for maximum performance. Reliable operation. To drive the high-power LEDs safely, a constant-current, waterproof, inductive driver is included for each set. These drivers were designed to last the life of your vehicle, and have been subjected to advanced transient voltage testing. These tests replicate the electrical wear and tear experienced in automotive environments every time your alternator starts and stops, which is what kills less robust electronics over time. The entire kit is also tested for long-term operation from -40 to 185 degrees F, vibration, and corrosion. All of these tests are completed to SAE/DOT standards, just like the factory components. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project! Installation Guide: Click to download
    • $180.00
    Backorder available
  • 15-16-17 Ford Mustang LED Switchback Turn Signal & Side Marker Bulb Resistor Kit
    Diode Dynamics2015-2016-2017 Ford Mustang LED Switchback Turn Signal Park Light Lamp Bulbs 7 Resistors KitNew PAIR of Diode Dynamics LED Switchback Turn Signal BulbsAlso Included: Two (2) 194 HP3 Cool White LED Bulbs to Replace Factory Side Marker Bulbs & LED Resistor KitFits 15-16-17 Ford MustangModern Dual Capability: Bright White Running Light w/ Intense Amber Turn SignalInstant On / Off FunctionMultiple Brightness Levels AvailableWhite Light Switches to Amber Blinker when Turn Signal ActivatedDirect Replacement Sized Bulbs -7743 (HP24) & 194Plug & Play InstallationResistor Kit Included to Fix Hyperblinking IssuesAluminum ConstructionSamsung LEDsNonpolar - Works in Either Direction when InstalledHigh Reliability with Embedded Transient Voltage Suppression LEDs are Built w/ Constant-Current Inductive CircuitryEasily Adds Styling to Your Mustang!Qty: 2 (Two) LED 7743 BulbsQty: 2 (Two) LED 194 HP3 BulbsQty: 2 (Two) LED ResistorsItem #DD0227 & DD4025 Standard fender lights only (not for factory LED) Bulb Size: 7443 & 194 Application: Front Turn & Side Marker Make: Ford Model: Mustang Years: 2015-2016-2017 Electrical Compatibility: Requires Hyperblink Fix (Resistors Included) What's Included Quantity: Two (2) Park Light Bulbs, Two (2) Side Marker Bulbs Warranty: 3 year warranty Return Policy: 30-day Return with No Restocking Fee 100% Satisfaction GuaranteeUpgrade. With this kit, you can easily convert the front end of your Mustang to an all-LED, cool white modern appearance. These aren't your average turn signal bulbs- they're Switchback! On the S550 Mustang, they will illuminate in a bright cool white color with your parking lights and headlights, then switch to intense amber when the turn signals are activated. The result is a modern dual-color effect! Also included with the kit is a pair of 194 HP3 cool white bulbs to replace the factory amber sidemarker bulb. This is one of the best ways to easily add styling to the S550. Brightness. All Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. Colors that match. Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance. Reduced Load. While LED upgrades do have a lower power draw compared to you factory bulb, you do not need to do any wiring or install resistors- just replace your factory bulbs. Due to the circuit design of the S550 Mustang, you do not need resistors to slow down the blinking speed. Your indicator in the dash will blink at a different rate, but your exterior turn signals will always blink at the standard speed. Reliability. Diode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your S550. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure. Experience. After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly manufacture and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Mustang or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project! Installation Guide: Click to download
    • $109.95
    2 left in stock. Backorder available
  • 15-16-17 Ford Mustang LED Switchback Turn Signal Park Light Side Marker Bulb Kit
    Diode Dynamics2015-2016-2017 Ford Mustang LED Switchback Turn Signal Park Light Lamp Bulb PairNew PAIR of Diode Dynamics LED Switchback Turn Signal BulbsAlso Included: Two (2) 194 HP3 Cool White LED Bulbs to Replace Factory Side Marker BulbsFits 15-16-17 Ford MustangModern Dual Capability: Bright White Running Light w/ Intense Amber Turn SignalInstant On / Off FunctionMultiple Brightness Levels AvailableWhite Light Switches to Amber Blinker when Turn Signal ActivatedDirect Replacement Sized Bulbs -7743 (HP24)410 Lumens Each BulbPlug & Play InstallationAluminum ConstructionSamsung LEDsNonpolar - Works in Either Direction when InstalledHigh Reliability with Embedded Transient Voltage Suppression LEDs are Built w/ Constant-Current Inductive CircuitryEasily Adds Styling to Your Mustang!Qty: 2 (Two) LED 7743 BulbsQty: 2 (Two) LED 194 HP3 BulbsItem #DD0227 Standard fender lights only (not for factory LED) Bulb Size: 7443 & 194 Application: Front Turn & Side Marker Make: Ford Model: Mustang Years: 2015-2016-2017 Electrical Compatibility: Requires Hyperblink Fix (Resistors Only) What's Included Quantity: Two (2) Park Light Bulbs & Two (2) Side Marker Bulbs Warranty: 3 year warranty Return Policy: 30-day Return with no restocking fee 100% Satisfaction GuaranteeUpgrade. With this kit, you can easily convert the front end of your Mustang to an all-LED, cool white modern appearance. These aren't your average turn signal bulbs- they're Switchback! On the S550 Mustang, they will illuminate in a bright cool white color with your parking lights and headlights, then switch to intense amber when the turn signals are activated. The result is a modern dual-color effect! Also included with the kit is a pair of 194 HP3 cool white bulbs to replace the factory amber sidemarker bulb. This is one of the best ways to easily add styling to the S550. Brightness. All Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. Colors that match. Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance. Reduced Load. While LED upgrades do have a lower power draw compared to you factory bulb, you do not need to do any wiring or install resistors- just replace your factory bulbs. Due to the circuit design of the S550 Mustang, you do not need resistors to slow down the blinking speed. Your indicator in the dash will blink at a different rate, but your exterior turn signals will always blink at the standard speed. Reliability. Diode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your S550. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure. Experience. After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly manufacture and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Mustang or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project! Installation Guide: Click to download
    • $90.00
    2 left in stock. Backorder available
  • 15-16-17 Subaru WRX/STi LED Switchback Turn Signal Park Light Boards Halo Kit
    Diode Dynamics2015-2019 Subaru WRX/STi LED Switchback Turn Signal Park Light Boards Halo KitNew Pair of Diode Dynamics LED Switchback Halo Ring BoardsFits 15-16-17-18-19 Subaru WRX/STiModern Dual Capability: Bright White Running Light w/ Intense Amber Turn SignalMultiple Brightness Levels AvailableWhite Light Switches to Amber Blinker when Turn Signal ActivatedExtremely Bright (Over 500 LED Chips on Each Halo Board)Driver Included for High Reliability with Embedded Transient Voltage Suppression LEDs are Built w/ Constant-Current Inductive CircuitryOver 5000 sets installed, with proven reliabilityEasily Adds Styling to Your WRX/STiFitment Note: Does Not Fit 2018-2019 STiQty: 2 (Two) Switchback LED BoardsQty: 2 (Two) Waterproof LED Driver UnitsQty: 8 (Eight) T-Tap ConnectorsItem #DD02016 Standard fender lights only (not for factory LED) Application: Front Turn & Side Marker Make: Subaru Model: WRX/STi Years: 2015-2016-2017-2018-2019 WRX & 2015-2016-2017 STi What's Included Quantity: Two (2) LED Switchback Halo Ring Boards, Two (2) Waterproof LED Drivers & Eight (8) T-Tap Connectors Warranty: 3 year warranty Return Policy: 30-day Return with No Restocking Fee 100% Satisfaction GuaranteeTime for an upgrade! These C-Light LED modules are circuit boards that fit right behind the factory diffusing reflector, illuminating in an extremely bright white, as well as a brilliant amber. Don't be fooled by other options on the market: these LEDs have been designed from the ground-up for this application, and manufactured in St. Louis, Missouri, to be absolutely the brightest lights physically possible. High output, clean appearance. The custom-designed LED modules replace the factory bulb or single LED, illuminating with a much higher intensity. With our proprietary high-density "HDLED" technology, these modules are populated with over 500 LED chips, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When it's off, the diffusing gel hides the chips, resulting in a clean, OEM appearance. Pure white color. Manufactured in USA, the modules light in a pure 6000K white color, not a cool blue like cheaper products on the market. And because they use modern high-power amber chips, rather than traditional LEDs, the amber is even brighter than the white! Constant-current power. To power the modules efficiently, your order includes two custom-designed drivers, which feature transient voltage suppression, reverse protection, and a switching driver for extremely high reliability over time. And here's what really makes this product shine over the competition: with an embedded microcontroller, the drivers utilize multi-stage PWM dimming, to allow for a half-brightness white, for use at night (parking lights), as well as a full-power white, for use as DRL during the day. Finally, the amber is run at even higher power, making the turn signal easily visible in broad daylight! Wire it up. Wiring instructions are included with your order. You will need to use the included T-tap connectors to connect the drivers to ground, parking signal, and turn signal on each side. Another wire is included for DRL connection. You can tap this into your DRLs to have the C-Light come on as a DRL alongside your factory DRL bulb. If you wish, you can add the DRL Harness to your order. Fully plug-and-play, this harness will disable your factory DRL, and power the C-Lights instead. Your high beam will still work as normal. Professional installation is recommended for this product, as the headlights must be opened. However, these lamps are substantially easier than most to work with, so we do recommend watching the installation process yourself, by viewing our video. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project! Installation Guide: Click to download
    • $180.00
    3 left in stock. Backorder available
  • 15-17 Ford F-150 RGBW LED Color Changing Headlight Accent Bars w/ Bluetooth Set
    2015-2017 Ford F-150 RGBW LED Color Changing Headlight Accent Bars w/ Bluetooth Set New Set of 15-17 Ford F-150 RGBW LED Multi-Color Changing Headlight Accent Panels RGBW Bluetooth Color-Changing Controller Included Set Covers Both Left & Right Side Accent Lights LED Panels are Installed Over Current Accent Bar Boards Panels Feature Multi-Color Changing RGBW LED Bulbs RGBW LED Bulbs Allow You To Maintain the Pure White Factory Color for Everyday Use Features an Additional 5 Colors - Red, Green, Blue, Purple & Cyan Constant-Current, Waterproof Inductive Drivers Included for Long Term Reliability Controller Compatible w/ iOS & Android Systems Create Any Color You Want Customize & Save Colors & Patterns, Strobe, Flashing, Camera Match & Music Sync All Featured in App 3-Year Manufacturer Warranty Made in USA Qty: 1 (One) Set of LED Boards & One Controller Warranty: 3 Year Replacement Limited Warranty All Diode Dynamics products come with a 3 Year Worry-Free Warranty.   Description: The new Premium-model Ford F-150 has an amber LED accent in the headlights. It is illuminated by circuit boards that hold amber LEDs. Our replacement LED boards utilize RGBW LEDs instead! The RGB function allows for full multicolor control using any standard RGB controller, to accent the look of your F-150 and make it stand out on the road. This product is not just RGB though- it is RGBW! That means there is an LED chip that is specifically white in color, right next to the standard red, green, and blue chips. By using an RGBW controller rather than the standard RGB, you can activate and control the white chip independently of the colors. This provides a much more uniform, pure, and bright white color than the traditional method of combining all RGB signals, so you can keep a clean, factory white appearance for everyday driving. You don't have to align and fasten LEDs by hand- this is an OEM-grade solution, with exact fitment, and perfect alignment of the new LEDs. Just remove the factory boards, and ours fit directly in place. Your order includes two sets of LED boards, one for each side. To drive the high-power LEDs safely, a new constant-current, waterproof, inductive driver is included for each set. You will also need a standard RGB or RGBW controller. Controllers can usually be powered by any standard 12V source. We recommend connecting to the parking light signal, so this module lights up when the parking lights or headlights are on. Remember, when you're not showing off, you can set the LEDs to pure white for everyday use. Professional installation is strongly recommended, as the factory headlights must be opened in order to replace the LED panels. Wiring instructions are included to identify the wire colors required to power your controller. All Diode Dynamics products are backed by a 3-year replacement warranty.  Made in USA by Diode Dynamics Manufacturing. Click to Download Installation Guide (.pdf) Bluetooth RGBW Controller Full multicolor control, or True White for everyday driving 20 adjustable patterns, plus custom modes, camera match, and audio sync Easily group multiple controllers for multi-zone control Fully waterproof and shockproof Overview Full RGBW. Full multicolor, with no sacrifice. Unlike other RGB controllers on the market that produce a mixed white color, this controller is full RGBW, with an independent White channel. After you have fun with colors, just select True White for a crisp, clean white output for everyday use. App Control. With the Diode Dynamics multicolor app, you can of course choose any color under the sun, including True White. There's preset patterns too, including strobe, fade, and more. But it's the extras that really make this controller special. Simple features like Preset Colors make it easy to use, and fun features like Camera Match and Music Sync make it fun to show off! Don't see a pattern you like? Just program your own, and save it for later! This controller is the most fully-featured in terms of control and features on the market. Instant Function. Don't wait around to see your lights. This controller will light up immediately to the previous setting when it gets power, no need to access the app. And connecting to the controller takes seconds, not minutes. Instant response, instant control, for an excellent user experience. Get a Few. If you have more than one RGBW device, consider picking up an extra controller. The Group feature allows you to connect and control multiple units in the same app, controlling them all at once (Grouped) or selecting one at a time, in a multizone setup. Even pick names so you can keep track of what's what, and really show off what your lights can do. Up to eight controllers can be accessed in one app session. Purpose-Built. Introducing the only RGBW controller on the market that is purpose-built for automotive LEDs. Made in USA, it is designed to handle standard automotive power, and will power any common-positive 12V RGBW lighting products. With a fully-waterproof, durable potting, and robust components allowing up to 3A output per channel, this is the most reliable, low-cost RGBW controller on the market! Easy Connection. With plug-and-play input and output connectors, simply plug in to any standard 12V signal - we recommend parking lights or direct battery. Then, connect the outputs directly to your Diode Dynamics multicolor products, with no cutting, crimping, or splicing. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project! Installation Guide: Click to download  
    • $180.00
  • 15-17 Ford Mustang Interior LED Glove Box Map Light Conversion Stage 1 White Kit
    2015-2016-2017 Ford Mustang Interior LED Glove Box Map Light Conversion Stage 1 White KitInterior LED Light Conversion KitFor 15-16-17 Ford Mustang(4) Vanity LED Bulbs(2) 194 Map Light Bulbs(1) 194 Trunk Light Bulb(1) 194 Glove Box Light BulbPlug & Play InstallationHigh Reliability with Embedded Transient Voltage Suppression LEDs are Built w/ Constant-Current Inductive CircuitryStage 1 Kit (300lm Output)Cool White Color & Slight Increase in Brightness Stage 2 Brightness (440lm) Also Available in Our StoreMade in USAQty: 8 (Eight) LED Bulbs Features Includes all the LEDs you need to replace the interior incandescent bulbsIncreased output with LED appearancePlug-and-play, simple installationAvailable in multiple colors and brightness levels. Overview Upgrade. Add a modern appearance to your Ford Mustang with this Interior LED Conversion Kit. This kit includes all the LEDs you need to replace the factory map, vanity, glove box, and trunk incandescent bulbs. These bright LEDs are available in a number of colors including cool white, red, blue, and green to match your unique style. Brightness. This kit is available in two different brightness levels. The Stage 1 option is a good choice if you're looking for a simple change of color, and slightly brighter output than your factory bulbs. For the highest increase in light output from your factory bulbs, we'd recommend the Stage 2 option!Stage 1: 300 lumens All Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. Reliability. Unlike other bulbs on the market, Diode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project! What's Included In the Box: Four (4) 74 1-SMD Vanity Light BulbsTwo (2) 194 Map Light BulbsOne (1) 194 Trunk Light BulbOne (1) 194 Glove Box Light Bulb Warranty: 3 year warranty 100% Satisfaction Guarantee Fitment Application: Glovebox, Map Light, Trunk/Cargo, Vanity Mirror Make: Ford Model: Mustang Years: 2015, 2016, 2017 Electrical Compatibility: No known electrical issues DRL Function: No
    • $34.00
    2 left in stock. Backorder available
  • 15-17 Ford Mustang Interior LED Glove Box Map Light Conversion Stage 2 White Kit
    Diode Dynamics2015-2016-2017 Ford Mustang Interior LED Glove Box Map Light Conversion Stage 2 White KitInterior LED Light Conversion KitFor 15-16-17 Ford Mustang(4) Vanity LED Bulbs(2) 194 Map Light Bulbs(1) 194 Trunk Light Bulb(1) 194 Glove Box Light BulbPlug & Play InstallationHigh Reliability with Embedded Transient Voltage Suppression LEDs are Built w/ Constant-Current Inductive CircuitryStage 2 Kit (440lm Output)Cool White Color & Major Increase in Brightness Stage 1 Brightness (300lm) Also Available in Our StoreMade in USAQty: 8 (Eight) LED Bulbs Features Includes all the LEDs you need to replace the interior incandescent bulbsIncreased output with LED appearancePlug-and-play, simple installationAvailable in multiple colors and brightness levels. Overview Upgrade. Add a modern appearance to your Ford Mustang with this Interior LED Conversion Kit. This kit includes all the LEDs you need to replace the factory map, vanity, glove box, and trunk incandescent bulbs. These bright LEDs are available in a number of colors including cool white, red, blue, and green to match your unique style. Brightness. This kit is available in two different brightness levels. The Stage 1 option is a good choice if you're looking for a simple change of color, and slightly brighter output than your factory bulbs. For the highest increase in light output from your factory bulbs, we'd recommend the Stage 2 option!Stage 2: 440 lumens All Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. Reliability. Unlike other bulbs on the market, Diode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project! What's Included In the Box: Four (4) 74 1-SMD Vanity Light BulbsTwo (2) 194 Map Light BulbsOne (1) 194 Trunk Light BulbOne (1) 194 Glove Box Light Bulb Warranty: 3 year warranty 100% Satisfaction Guarantee Fitment Application: Glovebox, Map Light, Trunk/Cargo, Vanity Mirror Make: Ford Model: Mustang Years: 2015, 2016, 2017 Electrical Compatibility: No known electrical issues DRL Function: No
    • $50.00
    3 left in stock. Backorder available
  • 15-18 Scion FRS & Subaru BRZ LED Tail as Turn w/ Backup Light Signal Module Kit
    2015-2018 Scion FRS & Subaru BRZ LED Tail as Turn w/ Backup Module KitNew Tail as Turn w/ Backup Module KitFits 2015-2018 Scion FRS & Subaru BRZThis Kit Allows Your LED Tail Light to Also Function as the Turn SignalEliminates the Factory Incandescent Turn Signal Bulb and Operates it Through Your LED Tail LightPlug & Play Easy Installation - You Don't Even Have to Remove Your Tail Lights!1 Kit Covers Left & Right Tail Lights A Resistor Kit is Integrated Into Each Module Automatically Eliminating Any HyperblinkingOptional: Wires Included to Convert Your Old Tail Light Sockets to Extra LED Backup Lights (Bulbs Not Included)Easily Adds a Modern Look to Your VehicleMade in USAQty: 1 (One) Tail as Turn w/ Backup Module Kit                      Fits: 15-16-17-18-2015-2016-2017-2018 Scion FRS & Subaru BRZ CarsNOTICE: Compatible with USDM models only / 3M Adhessive tape not included This kit will make your LED tail light also function as the turn signal on your 2015+ Subaru WRX or STi. By eliminating the factory incandescent turn signal bulb, and instead operating it through your LED tail light, you will gain a much more modern appearance. Using OEM plug-and-play tail light connectors, the base kit is 100% plug-and-play, with no wiring required. You don't even have to remove your tail lights! This product was designed and fully manufactured by Diode Dynamics, in St. Louis, Missouri. It is fully made in USA. This product is designed to be used with Diode Dynamics products. Use of non Diode Dynamics products may result in improper function. Please note: For ease of installation, load resistors will be integrated into each module. This means you will not have to tap any factory wiring to eliminate hyperblinking, or change your flasher relay. If you do already have an LED flasher relay, you may continue using it with this product. If you wish, you can also convert the old turn signal socket to an extra high-mounted backup light! Each kit comes with the wires to accomplish this (see video for details) but you will need new white LED bulbs. You must use LEDs, not standard bulbs, because you will be drawing power from the backup light circuit.Warranty 3 Year Replacement Limited WarrantyAll Diode Dynamics products come with a 3 Year Worry-Free Warranty. Installation Installation Guide: Click to download
    • $80.00
    Backorder available
Products: 6172 of 3368