Motorcycle Headlights

ONE NEW - MOTORCYCLE 7" INCH ROUND CRYSTAL CLEAR GLASS LENS / METAL HOUSING HEADLAMPINCLUDES (1) HIGH INTENSITY 3RD GENERATION LED H4 INTENSE WHITE LIGHT BULB! - Fits Harley Davidson Motorcycle with 7" Headlight Buckets - ONE New LED Headlight SAE/DOT Approved - Street Legal2000 Lumen Low Beam / 2500 Lumen High BeamDaylight White Brightness360° Light Beam AngleBrighter and Whiter than stock headlights High & Low Beam Function work with factory wiring Original 3 Prong Plug Design (Plug & Play) High Quality Glass Faced & Metal Backed Semi-Sealed Beam - Removable / Replaceable Light Bulbs Direct Replacement for stock headlights Fits motorcycles with 7" round headlight housingsPlug and Play Fitment into stock bucket THIS LISTING IS FOR ONE NEW 7" ROUND 12 VOLT HIGH/LOW BEAM CRYSTAL CLEAR H4 CONVERSION 3rd GENERATION LED MOTORCYCLE HEADLIGHT. INCLUDES ONE 3RD GEN LED XENON 6500K SUPER WHITE LED BULB. THIS IS A GLASS FACED / METAL BACKED HEADLIGHT. THESE ARE VERY GOOD QUALITY AND VERY BRIGHT! THESE HEADLIGHTS HAVE A DOMED CLEAR GLASS FACE UNLIKE ALL ALL THE OTHERS ON THE MARKET THAT HAVE A FLAT PLASTIC FACE. THESE LIGHT UP MUCH BRIGHTER AND WHITER THAN THE STANDARD STOCK STYLE INCANDESCENT HEADLIGHT BULBS. THESE HAVE THE ORIGINAL 3 PRONG PLUG DESIGN ON THE BACK SO THEY WILL PLUG RIGHT INTO THE ORIGINAL WIRING HARNESS (NO WIRING MODIFICATION NEEDED). THESE FIT DIRECTLY INTO THE STOCK BUCKETS WITHOUT HAVING TO MODIFY THE BUCKET. THESE WILL FIT MOTORCYCLES THAT HAVE 7 INCH IN DIAMETER HEADLIGHT BUCKETS. PLEASE MEASURE YOUR BUCKET BEFORE PURCHASING. THESE ARE GLASS AND WE WILL TAKE EXTRA CARE IN PACKAGING. SAE & DOT APPROVED. Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,500 Lumen Bulbs 2,500 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,000 Lumens of light and draws 18 watts of energy on the low beam setting; but produces 2,500 Lumens of light and draws 24 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,000 Lumens Low Beam / 2,500 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle18 Watts Low Beam / 24 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for cooling LED Chips per bulbAll-In-One Design. No Ballast or Driver Required: Newest TechnologyLED Protection Circuit to protect from reverse polarity, low voltage or high voltage spikes. Smart and Efficient Cooling System uses Built-In Cooling Fan. Greater Visibility - 3 times brighter than factory halogen bulbs.High luminous efficacy Flux: 2,500/2,000lm.High quality Aluminum heat sink ensures proper temperature regulation.Lower Power Consumption than Halogen bulb.Vibration proof design.30,000 Hour LifespanEasy installation, Plug and Play, No modification requiredNo Splicing of harnesses required for LED bulbsUses 75% less power than Halogen or HID bulbs3 times brighter than stock halogen bulbsOBC Error free operationDramatically improves visibility at night

THESE ARE 5-3/4" GLASS FACED / METAL BACKED SEMI-SEALED BEAM HALOGEN H4 6V MOTORCYCLE HEADLIGHT! INCLUDES REPLACEABLE H4 HALOGEN 6-VOLT 25/25 WATT BULB THIS LISTING IS FOR A NEW 5-3/4" 6 VOLT - 25 WATT / 25 WATT  HIGH/LOW BEAM HALOGEN MOTORCYCLE HEADLIGHT. THIS HEADLIGHT HAS A GLASS LENS WITH A METAL BACKING. THESE 5-3/4 INCH DIAMETER BULBS FIT MODELS WITH A 6 VOLT ELECTRICAL SYSTEM. THESE HAVE THE ORIGINAL 3 PRONG PLUG DESIGN ON THE BACK SO THEY WILL PLUG RIGHT INTO THE ORIGINAL WIRING HARNESS, NO MODIFICATION NEEDED TO YOUR STOCK WIRING. THESE ARE 5-3/4" INCHES IN DIAMETER. DOT SAE APPROVED. THESE ARE GLASS AND WE WILL TAKE EXTRA CARE IN PACKAGING.