SMD RGB Multi-Color

Multi-Color Changing RGB LED Headlight Halo Ring Set For 11-12-13-14 Jeep Grand Cherokee 2011-2012-2013-2014 JEEP GRAND CHEROKEE  - OCTANE LIGHTING MULTI-COLOR RGB SMD HALO HEADLIGHT RING KIT w/ IR CONTROLLER AND REMOTE Fits: 2011-2014 JEEP GRAND CHEROKEES*This listing is for a halo headlight kit and does not include an actual set of headlights.*Our exclusive Octane Lighting multi-color-changing technology exceeds the limits of typical halo lights (sometimes called Angel Eyes or Demon Eyes), giving you every variety of custom color combinations. Instead of having to choose a permanent color when buying your kit, you can choose a new color every time you get in your truck. What's Included:     (4) x 2011-2012-2013-2014 JEEP GRAND CHEROKEE - Octane Multi-Color RGB SMD LED Halo Headlight Rings     (2) x  External Drivers     (1) x 2 to 1 Splitter is included. Additional splitters can be purchased here if necessary.    (1) x IR Controller & Remote     (1) x Wiring Information Instructions   Additional Add-On Sold Seperately:     Octane Bluetooth Cell Phone Controller (Works with Apple and Android Devices) Product Specifications Make: JeepModel: Grand CherokeeYear(s): 2011-2014Included in this Kit 4 (four) Jeep Grand Cherokee LED halo ringsColor Changing IR Controller and RemoteWritten instructions for adding the LED halo rings to your headlightsThis kit includes halo rings to be installed in your stock headlight enclosures (new headlight enclosures are not included).

Diode DynamicsRGBW LED Multi-Color Changing Headlight Accent Boards Pair for 2013-2014 Ford MustangNew Pair of 13-14 Ford Mustang RGBW LED Multi-Color Changing Headlight Accent PanelsSet Covers Both Left & Right Side Accent LightsLED Panels Replace Factory Accent BoardsPanels Feature Multi-Color Changing RGBW LED BulbsRGBW LED Bulbs Allow You To Maintain the Pure White Factory Color for Everyday UseFeatures an Additional 5 Colors - Red, Green, Blue, Purple & CyanConstant-Current, Waterproof Inductive Drivers Included for Long Term ReliabilityCompatible with Any RGBW ControllerRGBW Controller Required (Not Included)3-Year Manufacturer WarrantyMade in USAQty: 1 (One) SetWarranty: 3 Year Replacement Limited WarrantyAll Diode Dynamics products come with a 3 Year Worry-Free Warranty. Overview OEM Style, Multicolor Function. The Mustang's factory headlamps are fitted with signature "tribar" DRLs. By replacing the circuit boards inside with Diode Dynamics LED circuit boards, you can add full multicolor funtionality, along with an optional amber sequencing mode, to seriously make your ride stand out! Your order includes two sets of LED boards, one for each side of the vehicle. RGBW. This product is not just RGB, it is RGBW! That means there is an extra LED chip that is specifically white in color, right next to the standard red, green, and blue LEDs. By using an RGBW controller, you can activate and control the white chip independently of the colors. This provides a much more uniform, pure, and bright white color than the traditional method of combining all RGB signals, so you can keep a clean, factory white appearance for everyday driving. Sequencing Turn Signal To take it a step further, you can select the RGBWA boards, which add yet another set of LEDs, high-power amber emitters. Any time your turn signal is activated, they will sequence across. The RGBWA drivers use a programmed integrated circuit to keep the timing exactly in sync with the factory tail lamp speed, for a unique feature that still flows well with factory styling. USDM vs EU/AU There's a few differences between Mustangs in different regions of the world, so we've developed two versions of the RGBWA Sequencing kit to accommodate this. First, if you're in Europe or Australia, you probably know that that your tribars aren't lit up at all! This kit will still fit directly in place - the mounting points are all there in your headlights, you're just missing the circuit boards. The sequential function is also a bit different: The US-market Mustang has a slower blink rate, to leave time for the taillights to sequence across. The drivers with the USDM option are designed to match this slower blink rate. EU/AU Mustangs have a standard blink rate, so the sequencing is faster to accommodate this. OEM-Grade Design. At Diode Dynamics, we work directly from OEM data, and use a 3D scanner, to develop precise replacement boards with identical mounting points and shape. Just remove the original boards, and ours will fit directly in place with correct alignment. You'll also see OEM design features, such as high-intensity automotive emitters, wire connectors, and serial numbers for quality assurance. Works correctly, with no surprises. In 2014, Diode Dynamics was the first to make replacement multicolor circuit boards. Our goal is to make them work just like the factory system - except for that fact that you can change the color anytime you'd like! That means connecting to the factory DRL and running light signals for proper operation. This isn't as easy as it sounds - on the Ford Mustang, all functions are powered through the vehicle's computer, rather than traditional relays. If the vehicle doesn't see the power draw it expecdts, it disables the signal. Many of our competitors skip the factory signals, instructing customers to connect power to the battery, and manually turn the LEDs off and on every time they're used. Not ideal! To provide an upgrade without disabling the factory functions, our engineers spent dozens of hours with our own Mustang, and consulted with Mustang owners overseas in order to tune the drivers correctly. They pull enough power to light up the boards brightly, with the factory functions, but do not cause any errors with the vehicle's computer. The included instructions show you exactly which wires to connect to, for no guesswork. Everything works perfectly, with no errors: there's no need to sacrifice factory function with Diode Dynamics products! Optically correct. Unlike strips or halos, replacement boards work in conjunction with factory optics in your headlight. Since the factory setup uses only one white chip, it can be difficult to align the light properly from all four replacement emitters (Red, Green, Blue, and White). To save cost, other brands often use low-cost generic chips, which cannot focus light properly. This creates odd appearances, as some sections are brighter than others, and mixed colors like yellow and purple don't match. Diode Dynamics uses high-intensity automotive emitters to direct light properly to the factory optic, and all designs are tested a number of times with small adjustments to make sure the setup is optimized. Even a 0.1mm change can make a big difference, and Diode Dynamics products are carefully tuned for maximum performance. Reliable operation. To drive the high-power LEDs safely, a constant-current, waterproof, inductive driver is included for each set. These drivers were designed to last the life of your vehicle, and have been subjected to advanced transient voltage testing. These tests replicate the electrical wear and tear experienced in automotive environments every time your alternator starts and stops, which is what kills less robust electronics over time. The entire kit is also tested for long-term operation from -40 to 185 degrees F, vibration, and corrosion. All of these tests are completed to SAE/DOT standards, just like the factory components. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!

RGB Multi-Color Changing LED Headlight Halo Ring BLUETOOTH Set For 11-12-13-14 Jeep Grand Cherokee 2011-2012-2013-2014 JEEP GRAND CHEROKEE  - OCTANE LIGHTING MULTI-COLOR RGB SMD HALO HEADLIGHT RING KIT w/ IPHONE / ANDROID BLUETOOTH CONTROLLER Fits: 2011-2014 JEEP GRAND CHEROKEES*This listing is for a halo headlight kit and does not include an actual set of headlights.*Our exclusive Octane Lighting multi-color-changing technology exceeds the limits of typical halo lights (sometimes called Angel Eyes or Demon Eyes), giving you every variety of custom color combinations. Instead of having to choose a permanent color when buying your kit, you can choose a new color every time you get in your truck. What's Included:     (4) x 2011-2012-2013-2014 JEEP GRAND CHEROKEE - Octane Multi-Color RGB SMD LED Halo Headlight Rings     (2) x  External Drivers     (1) x 2 to 1 Splitter is included. Additional splitters can be purchased here if necessary.    (1) x Bluetooth Cell Phone Controller     (1) x Wiring Information Instructions Product Specifications Make: JeepModel: Grand CherokeeYear(s): 2011-2014Included in this Kit 4 (four) Jeep Grand Cherokee LED halo ringsBluetooth Iphone / Android Cell Phone Multi-Color LED Halo ControllerWritten instructions for adding the LED halo rings to your headlightsThis kit includes halo rings to be installed in your stock headlight enclosures (new headlight enclosures are not included). Bluetooth RGB led strip light controller flexible light wireless remote controlControl Your Lights From Your Apple or Android Device! BLUETOOTH 4 RGB LED strip controller, the latest version 2 model with extensive APP for smartphone and tablet (Apple iOS and Android). Control your RGB LED strip directly via Bluetooth from your smartphone or tablet. Wide 16 million color wide RGB color range, also for creating soft pastel tints.The Bluetooth APP is also equipped with a sn where you can set timers to switch the lights on or off and change color or dimmer setting at certain times. This is ideal for when you are on holiday and automatically switch on the light at specific times. Also handy for automated timed control of LED illuminated signs. The controller stores all settings so the device with App doesn"t have to be in range.You can choose from a variety of preset effects, but you can also create a custom color program with the APP of this Bluetooth LED controller. It is also possible to load a MP3 music file for color effects.You can easily use multiple Bluetooth lamps and multiple Bluetooth LED controllers together and operate both individually or in a group, all from within the same APP. Specifications: Type:  RGB ControlerColor: WhiteSize: 86*45*23mmWeight: N.W:61g   G.W:101gCertification: CE,FCC,RoHSOscillation: 50/60HzVoltage: DC12V-24VMax.Load Power: 12AOutput Channel: 3CH/RGBWaterproof: IP25Material: AluminumApplicable: Strip LightWork Temperature: -20℃-60℃Connection Methods: Bluetooth Version 4.0Effective Remote Distance: No barrier,60m ;Indoor, 30m   Features: This controller is a bluetooth enabled, multicolored,energy efficient smart led light controller that you can control with your smart phone or tablet with Android and Apple IOS APP. It supports a color palette of over 16 million colors and also different tones of white light-from warm yellow light to vibrant blue lightThe APP is with timer, music control and group control function and 20 built-in modes and DIY mode.The control distance is 20-40 meters.Requires Bluetooth 4.0 compatible device,Android device must be at least android 4.3 and IOS system must be at least IOS 6.0   LED MagicLight Instructions - Android & Apple IOS smart RGB LED bluetooth controller   A:Search “LED Magic Light " in App store by iPhone , download for free and install it. Following pages show you how to install "LED Magic Light v2 ". (Android device search Magic Light BLE from Google Play and install it)   B.Download it by scanning QR code (included in package) OR search App in App Store: 2. How to use (android IOS smart rgb led bluetooth controller) A: Please switch on the bluetooth led controller B: Then open phone’s Bluetooth setting and enable Bluetooth On C: Then open the Light Controller App and you will see these bluetooth led controller already on the device list (the bulb will connect to your phone directly, no need wait time to get them pair, the bulb will then connect to your phone automatically) D: you can now control the bluetooth led controller from phone APP. The APP also features a timer function, group control, and a music control function