75-82 Chevy Corvette Red LED Rear Tail Light Lamp Lens 1975 1976 1977-1982 Set

(1)  2 Terminal 12V LED Electrical Flasher New 2-prong (2 terminal with ground wire) 12 Volt LED Flasher. Flasher is designed to replace stock turn signal flasher on most 1955 to present cars and trucks with 2 prong 12v systems. Flasher has NEGATIVE ground (flasher will NOT work with early 6v POSITIVE ground cars/truck or motorcycles). Replacement of the stock flasher is usually needed in order for the LED turn signals to operate as intended. Solves: hyper flashing, burnt out bulb indication, or non flashing when using led lights and led light bulbs. We are also including a FREE "reverse polarity" adapter. If your turn signal flasher dock has the wires reversed, no need to disconnect, switch, and reinstall wires. Simply attach the adapter to the end of the flasher. These flashers will also work with stock turn signals, so if you change back to stock lights, there will be no need to swap out the flasher We also offer 3-prong LED flashers for most pre-1955 vehicles that have been converted to 12v Solve Turn Signal Problems: Hyper Flashing, No Flashing, or Burnt Out Bulb Indication when using LED Lights and LED Bulbs 2 Terminal Flasher / 2 Prong with Ground Wire Use with LED lights Max 20 Amps

2 WIRE PLUG ADAPTOR FOR TAIL LAMP SOCKET-1156 SINGLE CONTACT STYLE

THESE ARE 5.75" CRYSTAL CLEAR GLASS FACED / METAL BACKED HEADLIGHT - SET OF 4Includes Octane Lighting H4 (9003 / HB2) 40w 6000k 4000 Lumen LED High Intensity Discharge Hi/Low Beam Headlight Light Bulbs with Canbus Error Canceller Plugs!SET OF 4 - 5-3/4" CRYSTAL H4 HEADLIGHTSCRYSTAL CLEAR GLASS / METAL BACKSIDEHIGH INTENSITY LED BULBS(4) LOW/HIGH BEAM HEADLIGHTSNO MODIFICATIONS NEEDED - PLUG AND PLAYPART NUMBER INTERCHANGE: H5006 / H5001 OR 4000 / 5001DOT SAE APPROVEDLED BULB SPECIFICATIONS:Bulb Type: - Generation 5 - H4 (9003) LED Low Beam / High Beam Headlight with Canbus Error Canceller PlugsCanbus Error Free Electrical plugs prevent any headlight error codesWattage: 40W / EACH PC Luminous Flux: 8000LM / Set ,4000LM / Each Bulb  Beam Angle: 360°  Placement on Vehicle: Left, Right, FrontColor Temperature: 6000K Pure White THIS LISTING IS FOR A NEW SET OF 5 3/4" CRYSTAL CLEAR GLASS LENS - METAL BACK HEADLIGHT BULBS. THIS SET INCLUDES (4) LOW/HIGH BEAM HEADLIGHTS WITH HIGH INTENSITY LED LIGHT BULBS (NO WIRING OR BUCKET MODIFICATION NEEDED). THESE HAVE THE ORIGINAL SHAPED PRONGS ON THE BACK SO THEY WILL PLUG RIGHT INTO YOUR ORIGINAL WIRING HARNESS PLUGS. THESE WILL FIT ANY CAR OR TRUCK THAT HAS 4 ROUND GLASS HEADLIGHTS. WILL FIT INTO STOCK BUCKETS. EACH BULB IS 5 3/4 INCHES IN DIAMETER. THESE ARE GLASS AND WE WILL TAKE EXTRA CARE IN PACKAGING. DOT SAE APPROVED INTERCHANGE: H5006 / H5001 OR 4000 / 5001

(1)  2 Terminal 12V LED Electrical Flasher New 2-prong (2 terminal with ground wire) 12 Volt LED Flasher. Flasher is designed to replace stock turn signal flasher on most 1955 to present cars and trucks with 2 prong 12v systems. Flasher has NEGATIVE ground (flasher will NOT work with early 6v POSITIVE ground cars/truck or motorcycles). Replacement of the stock flasher is usually needed in order for the LED turn signals to operate as intended. Solves: hyper flashing, burnt out bulb indication, or non flashing when using led lights and led light bulbs. We are also including a FREE "reverse polarity" adapter. If your turn signal flasher dock has the wires reversed, no need to disconnect, switch, and reinstall wires. Simply attach the adapter to the end of the flasher. These flashers will also work with stock turn signals, so if you change back to stock lights, there will be no need to swap out the flasher We also offer 3-prong LED flashers for most pre-1955 vehicles that have been converted to 12v Solve Turn Signal Problems: Hyper Flashing, No Flashing, or Burnt Out Bulb Indication when using LED Lights and LED Bulbs 2 Terminal Flasher / 2 Prong with Ground Wire Use with LED lights Max 20 Amps