(855) 962-8263

LED Strip Kits

Products: 1–2 of 2
Show: 12
Sort by: Name A - Z
  • 8Pc BLUE LED Motorcycle Lighting Neon Body Engine Glow Lights Strips Remote Kit
    8Pc BLUE LED Motorcycle Lighting Neon Body Engine Glow Lights Strips Remote Kit
    BLUE SMD LED KIT! This kit allows you to have BLUE LED lights flash, fade, or stay a solid color. 8 PIECE BLUE LED - 12 VOLT WATERPROOF LED LIGHT STRIPS WITH 3M TAPE ON THE BACKSIDE FOR EASY INSTALLATION. INCLUDES WIRELESS REMOTE AND CONTROL UNIT. MOTORCYCLE AMBIENT LIGHTING
    • $54.95
    Backorder available
  • Bar Billiard Pool Table Bumper LED RGB Color Changing Light Beat To Music Remote
    Bar Billiard Pool Table Bumper LED RGB Color Changing Light Beat To Music Remote
    Set to any color you want to stay on / fade / or flash! or Color Changing LEDS that strobe to the beat of the music!Use your home 110v AC Power (COMES WITH POWER SUPPLY) ON/OFFON SOLID - WITH 16 COLORS TO CHOOSE FROM AND ADJUST BRIGHTNESSSET TO FLASH DIFFERENT COLORS OR SLOW COLOR CHANGE FADESET TO MUSIC MODE TO HAVE LIGHTS BEAT TO THE SOUND OF MUSIC (YOU CAN ADJUST THE SENSITIVITY)FITS ALL POOL TABLE SIZES (6FT, 7FT, 8FT)INCLUDES:LED CONTROLLER WITH MUSIC FUNCTIONIR REMOTERGB (RED, GREEN, BLUE) LED STRIP WITH 3M TAPE ON THE BACKSIDE SO YOU CAN MOUNT ANYWHERE.110V (HOME) POWER SUPPLY This kit of lights for pool tables allows you to have RGB LED lights flash, fade and dance to the beat of music. Plug right into your home wall outlet and have the option of using 3 RGB outputs that allows you to hook three different LED strips. With this kit you have the option to choose between 16 colors to either stay solid, stay solid white, flash, fade, vary brightness, dance to the beat of music (2 settings). This kit comes with a full function Wireless Remote to control the unit. This DIY LED kit is energy efficient and gives off very little heat so it wont damage your felt or cause a fire. This kit can be set up in the bumpers of the table or affixed with the 3M backing to the underside of the table frame to illuminate the legs and floor. Low power, energy efficient, virtually no heat. Controller SpecificationsInput Voltage - 110 volts ACOutput Voltage - 12 volts DCPower (watts) - 60wCurrent (Amps) Output - 5 amp3 Ports (9 ChannelsWidth - 3 inchesLength - 6 inchesHeight - 1-1/8 inches RGB LED SPECIFICATIONS: LED Type5050 SMD LED (Waterproof)Color16 solid colors optionsDifferent lights changing modesFlash, Strobe, Fade, and SmoothLED Quantity30 leds/MeterSizeL500cm (5M) x W1.40cm x T0.40cmPackage5 Meters / ReelView angle120çWorking Input Voltage12VDCWorking Current/meter0.6AOutput power36W /5 MeterLuminous Flux5000-7000 Lumens/MeterWorking Tempreture-20ç to 50çDrive ModeContant VoltagePCB BackgroundWhiteWaterproof IP65 Power supply Adapter 110v/240v AC - 12v DC 4 AmpsCE, GS, TUV, UL Approved4 A Power Output (48 watts) 12v DC1.5 Meter Cable - plus 1.5 Meter Main Cable (3.0m Total)Includes original end connector
    • $99.99
    Backorder available
New arrivals
Bestsellers
  • Amber Flush Mount Rear Tail Brake Light Lens Assembly Set of 4 for 59 Cadillac
    Amber Flush Mount Rear Tail Brake Light Lens Assembly Set of 4 for 59 Cadillac
    Octane LightingSET OF 4 - Amber Flush Mount Tail Light Lens Assembly for 59 CadillacSET OF 4 New Amber Tail Light Lens Assembles12v 1157 Bulbs IncludedAmber Polycarbonate LensesSimple 3-Wire HookupTail Lamp / Brake FunctionsFully Sealed ElectronicsEasy Surface Mounting w/ 2 StudsMounting Hardware & Gaskets IncludedFits 1959 Cadillac CarsQty: 4 (Four) AssembliesWe Also Have These Assemblies Available Individually in Our Store
    • $139.95
    1 left in stock.
  • Amber Flush Mount Rear Tail Brake Light Lens Assembly Set of 4 for 59 Cadillac
    Amber Flush Mount Rear Tail Brake Light Lens Assembly Set of 4 for 59 Cadillac
    Octane LightingSET OF 4 - Amber Flush Mount Tail Light Lens Assembly for 59 CadillacSET OF 4 New Amber Tail Light Lens Assembles12v 1157 Bulbs IncludedAmber Polycarbonate LensesSimple 3-Wire HookupTail Lamp / Brake FunctionsFully Sealed ElectronicsEasy Surface Mounting w/ 2 StudsMounting Hardware & Gaskets IncludedFits 1959 Cadillac CarsQty: 4 (Four) AssembliesWe Also Have These Assemblies Available Individually in Our Store
    • $139.95
    1 left in stock.
  • 5-3/4" Motorcycle Stock 6v LED Headlamp w/ Chrome Moto Bucket Bottom Mount EACH
    5-3/4" Motorcycle Stock 6v LED Headlamp w/ Chrome Moto Bucket Bottom Mount EACH
    ONE - NEW - MOTORCYCLE 5-3/4" INCH ROUND STOCK GLASS HEADLAMP & CHROME METAL HOUSING INCLUDES (1) HIGH INTENSITY 6v 3RD GENERATION LED H4 INTENSE WHITE LIGHT BULB! - Fits Harley Davidson Motorcycle with 5.75" Headlight Buckets - One New 6-Volt LED Headlight w/ Moto Bucket SAE/DOT Approved - Street LegalDurable Chrome Bucket w/ Wiring & PlugBottom Stud Mounted BucketChrome Finish2600 Lumen Low Beam / 4000 Lumen High BeamDaylight White Brightness360° Light Beam AngleBrighter and Whiter than Stock Headlights High & Low Beam Function LED Bulb Works with Factory Wiring Original 3 Prong Plug Design (Plug & Play) High Quality Stock Style Glass Faced & Metal Backed Semi-Sealed Beam - Removable / Replaceable Light Bulbs Direct Replacement for Stock Headlights Fits Motorcycles with 5-3/4" Round Headlight Housing This listing is for one new 5.75" round 6 volt high/low beam stock style H4 conversion 3rd Generation LED motorcycle headlight with a chrome headlight bucket. Includes one 3rd Gen LED Xenon 6500k super white LED bulb. This is a glass faced headlight. These are very good quality and very bright! These headlights have a domed clear glass face unlike all all the others on the market that have a flat plastic face. These light up much brighter and whiter than the standard stock style incandescent headlight bulbs. These have the original 3 prong plug design on the back so they will plug right into the original wiring harness (no wiring modification needed). These will fit motorcycles that have 5.75 inch in diameter headlight buckets with stud mounts. Bucket is metal with a chrome finish and a bottom stud mount.  We will take extra care in packaging. Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,600 / 4,000 Lumen Bulbs 2,600 / 4,000 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,600 Lumens of light and draws 26 watts of energy on the low beam setting; but produces 4,000 Lumens of light and draws 40 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,600 Lumens Low Beam / 4,00 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle26 Watts Low Beam / 40 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for CoolingNewest Technology All-In-One Design: No Ballast or Driver RequiredLED Protection Circuit to Protect from Reverse Polarity, Low Voltage or High Voltage SpikesSmart & Efficient Cooling System Uses Built-In Cooling FanGreater Visibility - 3x Brighter than Factory Halogen BulbsHigh Luminous Efficacy Flux: 2,600/4,000lmHigh Quality Aluminum Heat Sink Ensures Proper Temperature RegulationLower Power Consumption than Halogen BulbsVibration Proof Design30,000 Hour LifespanEasy Plug & Play Installation - No Modification RequiredNo Splicing of Harnesses Required for LED BulbsUses 75% LESS Power than Halogen or HID Bulbs3x Brighter than Stock Halogen BulbsOBC Error Free OperationDramatically Improves Visibility at Night SAE & DOT APPROVED
    • $79.95
    2 left in stock.
  • 5-3/4" Motorcycle Stock 6v LED Headlamp w/ Chrome Moto Bucket Bottom Mount EACH
    5-3/4" Motorcycle Stock 6v LED Headlamp w/ Chrome Moto Bucket Bottom Mount EACH
    ONE - NEW - MOTORCYCLE 5-3/4" INCH ROUND STOCK GLASS HEADLAMP & CHROME METAL HOUSING INCLUDES (1) HIGH INTENSITY 6v 3RD GENERATION LED H4 INTENSE WHITE LIGHT BULB! - Fits Harley Davidson Motorcycle with 5.75" Headlight Buckets - One New 6-Volt LED Headlight w/ Moto Bucket SAE/DOT Approved - Street LegalDurable Chrome Bucket w/ Wiring & PlugBottom Stud Mounted BucketChrome Finish2600 Lumen Low Beam / 4000 Lumen High BeamDaylight White Brightness360° Light Beam AngleBrighter and Whiter than Stock Headlights High & Low Beam Function LED Bulb Works with Factory Wiring Original 3 Prong Plug Design (Plug & Play) High Quality Stock Style Glass Faced & Metal Backed Semi-Sealed Beam - Removable / Replaceable Light Bulbs Direct Replacement for Stock Headlights Fits Motorcycles with 5-3/4" Round Headlight Housing This listing is for one new 5.75" round 6 volt high/low beam stock style H4 conversion 3rd Generation LED motorcycle headlight with a chrome headlight bucket. Includes one 3rd Gen LED Xenon 6500k super white LED bulb. This is a glass faced headlight. These are very good quality and very bright! These headlights have a domed clear glass face unlike all all the others on the market that have a flat plastic face. These light up much brighter and whiter than the standard stock style incandescent headlight bulbs. These have the original 3 prong plug design on the back so they will plug right into the original wiring harness (no wiring modification needed). These will fit motorcycles that have 5.75 inch in diameter headlight buckets with stud mounts. Bucket is metal with a chrome finish and a bottom stud mount.  We will take extra care in packaging. Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,600 / 4,000 Lumen Bulbs 2,600 / 4,000 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,600 Lumens of light and draws 26 watts of energy on the low beam setting; but produces 4,000 Lumens of light and draws 40 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,600 Lumens Low Beam / 4,00 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle26 Watts Low Beam / 40 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for CoolingNewest Technology All-In-One Design: No Ballast or Driver RequiredLED Protection Circuit to Protect from Reverse Polarity, Low Voltage or High Voltage SpikesSmart & Efficient Cooling System Uses Built-In Cooling FanGreater Visibility - 3x Brighter than Factory Halogen BulbsHigh Luminous Efficacy Flux: 2,600/4,000lmHigh Quality Aluminum Heat Sink Ensures Proper Temperature RegulationLower Power Consumption than Halogen BulbsVibration Proof Design30,000 Hour LifespanEasy Plug & Play Installation - No Modification RequiredNo Splicing of Harnesses Required for LED BulbsUses 75% LESS Power than Halogen or HID Bulbs3x Brighter than Stock Halogen BulbsOBC Error Free OperationDramatically Improves Visibility at Night SAE & DOT APPROVED
    • $79.95
    2 left in stock.
  • Bar Billiard Pool Table Bumper LED RGB Color Changing Light Beat To Music Remote
    Bar Billiard Pool Table Bumper LED RGB Color Changing Light Beat To Music Remote
    Set to any color you want to stay on / fade / or flash! or Color Changing LEDS that strobe to the beat of the music!Use your home 110v AC Power (COMES WITH POWER SUPPLY) ON/OFFON SOLID - WITH 16 COLORS TO CHOOSE FROM AND ADJUST BRIGHTNESSSET TO FLASH DIFFERENT COLORS OR SLOW COLOR CHANGE FADESET TO MUSIC MODE TO HAVE LIGHTS BEAT TO THE SOUND OF MUSIC (YOU CAN ADJUST THE SENSITIVITY)FITS ALL POOL TABLE SIZES (6FT, 7FT, 8FT)INCLUDES:LED CONTROLLER WITH MUSIC FUNCTIONIR REMOTERGB (RED, GREEN, BLUE) LED STRIP WITH 3M TAPE ON THE BACKSIDE SO YOU CAN MOUNT ANYWHERE.110V (HOME) POWER SUPPLY This kit of lights for pool tables allows you to have RGB LED lights flash, fade and dance to the beat of music. Plug right into your home wall outlet and have the option of using 3 RGB outputs that allows you to hook three different LED strips. With this kit you have the option to choose between 16 colors to either stay solid, stay solid white, flash, fade, vary brightness, dance to the beat of music (2 settings). This kit comes with a full function Wireless Remote to control the unit. This DIY LED kit is energy efficient and gives off very little heat so it wont damage your felt or cause a fire. This kit can be set up in the bumpers of the table or affixed with the 3M backing to the underside of the table frame to illuminate the legs and floor. Low power, energy efficient, virtually no heat. Controller SpecificationsInput Voltage - 110 volts ACOutput Voltage - 12 volts DCPower (watts) - 60wCurrent (Amps) Output - 5 amp3 Ports (9 ChannelsWidth - 3 inchesLength - 6 inchesHeight - 1-1/8 inches RGB LED SPECIFICATIONS: LED Type5050 SMD LED (Waterproof)Color16 solid colors optionsDifferent lights changing modesFlash, Strobe, Fade, and SmoothLED Quantity30 leds/MeterSizeL500cm (5M) x W1.40cm x T0.40cmPackage5 Meters / ReelView angle120çWorking Input Voltage12VDCWorking Current/meter0.6AOutput power36W /5 MeterLuminous Flux5000-7000 Lumens/MeterWorking Tempreture-20ç to 50çDrive ModeContant VoltagePCB BackgroundWhiteWaterproof IP65 Power supply Adapter 110v/240v AC - 12v DC 4 AmpsCE, GS, TUV, UL Approved4 A Power Output (48 watts) 12v DC1.5 Meter Cable - plus 1.5 Meter Main Cable (3.0m Total)Includes original end connector
    • $99.99
    Backorder available

Browse by Vehicle