LED Strip Kits

Products: 12 of 2
  • Bar Billiard Pool Table Bumper LED RGB Color Changing Light Beat To Music Remote
    Set to any color you want to stay on / fade / or flash! or Color Changing LEDS that strobe to the beat of the music!Use your home 110v AC Power (COMES WITH POWER SUPPLY) ON/OFFON SOLID - WITH 16 COLORS TO CHOOSE FROM AND ADJUST BRIGHTNESSSET TO FLASH DIFFERENT COLORS OR SLOW COLOR CHANGE FADESET TO MUSIC MODE TO HAVE LIGHTS BEAT TO THE SOUND OF MUSIC (YOU CAN ADJUST THE SENSITIVITY)FITS ALL POOL TABLE SIZES (6FT, 7FT, 8FT)INCLUDES:LED CONTROLLER WITH MUSIC FUNCTIONIR REMOTERGB (RED, GREEN, BLUE) LED STRIP WITH 3M TAPE ON THE BACKSIDE SO YOU CAN MOUNT ANYWHERE.110V (HOME) POWER SUPPLY This kit of lights for pool tables allows you to have RGB LED lights flash, fade and dance to the beat of music. Plug right into your home wall outlet and have the option of using 3 RGB outputs that allows you to hook three different LED strips. With this kit you have the option to choose between 16 colors to either stay solid, stay solid white, flash, fade, vary brightness, dance to the beat of music (2 settings). This kit comes with a full function Wireless Remote to control the unit. This DIY LED kit is energy efficient and gives off very little heat so it wont damage your felt or cause a fire. This kit can be set up in the bumpers of the table or affixed with the 3M backing to the underside of the table frame to illuminate the legs and floor. Low power, energy efficient, virtually no heat. Controller SpecificationsInput Voltage - 110 volts ACOutput Voltage - 12 volts DCPower (watts) - 60wCurrent (Amps) Output - 5 amp3 Ports (9 ChannelsWidth - 3 inchesLength - 6 inchesHeight - 1-1/8 inches RGB LED SPECIFICATIONS: LED Type5050 SMD LED (Waterproof)Color16 solid colors optionsDifferent lights changing modesFlash, Strobe, Fade, and SmoothLED Quantity30 leds/MeterSizeL500cm (5M) x W1.40cm x T0.40cmPackage5 Meters / ReelView angle120çWorking Input Voltage12VDCWorking Current/meter0.6AOutput power36W /5 MeterLuminous Flux5000-7000 Lumens/MeterWorking Tempreture-20ç to 50çDrive ModeContant VoltagePCB BackgroundWhiteWaterproof IP65 Power supply Adapter 110v/240v AC - 12v DC 4 AmpsCE, GS, TUV, UL Approved4 A Power Output (48 watts) 12v DC1.5 Meter Cable - plus 1.5 Meter Main Cable (3.0m Total)Includes original end connector
    • $99.99
    Backorder available
  • 8Pc BLUE LED Motorcycle Lighting Neon Body Engine Glow Lights Strips Remote Kit
    BLUE SMD LED KIT! This kit allows you to have BLUE LED lights flash, fade, or stay a solid color. 8 PIECE BLUE LED - 12 VOLT WATERPROOF LED LIGHT STRIPS WITH 3M TAPE ON THE BACKSIDE FOR EASY INSTALLATION. INCLUDES WIRELESS REMOTE AND CONTROL UNIT. MOTORCYCLE AMBIENT LIGHTING
    • $54.95
    Backorder available
  • Bogg Bag XL You Navy Me Crazy Blue Ultimate Beach Tote Go Anywhere With 2 Pouch
    Bogg Bag Cooler COMBO Large Original Beach Tote Navy Blue NWT AuthenticUltimate Tote w/ Cooler and Drink Caddy Get all 3! The perfect combination for the beach, boat or ballgames.The Ultimate Tote â€“ Roomy and it won't tip over. Tough plastic is easy to rinse off. Includes 2 removable zip pouches. Bogg® Brrr Cooler â€“ Insulated insert fits snug inside the tote. Durable, soft-sided polyester exterior. Zip closure and adjustable shoulder strap. Ice packs recommended. Navy.Cup Caddy â€“ Convenient size holds most cans and bottles. Coral.
    • $89.95
    1 left in stock.
  • 10Pc White LED Chrome Modules Motorcycle Chopper Frame Neon Glow Lights Pods Kit
    12V MOTORCYCLE WHITE LED ACCENT LIGHTING. (10) CHROME MODULES WITH 4 WHITE LEDS IN EACH MODULE. TWO SCREW HOLES IN THE ABS CHROME MODULE FOR EASY MOUNTING. White LED Color. Operates from 7V-15V DC. 120 degree viewing angle, 4 LEDs per Light. LED's last longer & use less power (uses 30mA of power @ 12V DC). 4 LED's 5mm (Not SMD LEDs with lens cap). 36" wire leads (Red = positive, Black= negative).
    • $34.95
    Out of stock
  • 8Pc White LED Chrome Modules Motorcycle Chopper Frame Neon Glow Lights Pods Kit
    12V MOTORCYCLE WHITE LED ACCENT LIGHTING. (8) CHROME MODULES WITH 4 WHITE LEDS IN EACH MODULE. ADHESIVE DOUBLE SIDED TAPE ON BACKSIDE AND TWO SCREW HOLES IN THE ABS CHROME MODULE FOR EASY MOUNTING. White LED Color. Operates from 7V-15V DC. 120 degree viewing angle, 4 LEDs per Light. LED's last longer & use less power (uses 30mA of power @ 12V DC). 4 LED's 5mm (Not SMD LEDs with lens cap). 36" wire leads (Red = positive, Black= negative). Plastic Chrome module with 2 mounting holes. Includes double sided mounting tape on backside Measures L=1 1/2" H=3/8" W=3/4" Completely waterproof, safe for wet areas.
    • $20.95
    Out of stock
  • 2x Tape Dispenser Industrial Packing Gun Shipping w/ 6 Rolls 2 Mil 2" x 110yds
    2 -  2" Tape Dispensers with 6 large tape rollsIncludes:1 - 2" Side Load Tape Gun6 Rolls - 2 Mil 2" x 110yds
    • $49.95
    Out of stock
  • Bar Billiard Pool Table Bumper LED RGB Color Changing Light Beat To Music Remote
    Set to any color you want to stay on / fade / or flash! or Color Changing LEDS that strobe to the beat of the music!Use your home 110v AC Power (COMES WITH POWER SUPPLY) ON/OFFON SOLID - WITH 16 COLORS TO CHOOSE FROM AND ADJUST BRIGHTNESSSET TO FLASH DIFFERENT COLORS OR SLOW COLOR CHANGE FADESET TO MUSIC MODE TO HAVE LIGHTS BEAT TO THE SOUND OF MUSIC (YOU CAN ADJUST THE SENSITIVITY)FITS ALL POOL TABLE SIZES (6FT, 7FT, 8FT)INCLUDES:LED CONTROLLER WITH MUSIC FUNCTIONIR REMOTERGB (RED, GREEN, BLUE) LED STRIP WITH 3M TAPE ON THE BACKSIDE SO YOU CAN MOUNT ANYWHERE.110V (HOME) POWER SUPPLY This kit of lights for pool tables allows you to have RGB LED lights flash, fade and dance to the beat of music. Plug right into your home wall outlet and have the option of using 3 RGB outputs that allows you to hook three different LED strips. With this kit you have the option to choose between 16 colors to either stay solid, stay solid white, flash, fade, vary brightness, dance to the beat of music (2 settings). This kit comes with a full function Wireless Remote to control the unit. This DIY LED kit is energy efficient and gives off very little heat so it wont damage your felt or cause a fire. This kit can be set up in the bumpers of the table or affixed with the 3M backing to the underside of the table frame to illuminate the legs and floor. Low power, energy efficient, virtually no heat. Controller SpecificationsInput Voltage - 110 volts ACOutput Voltage - 12 volts DCPower (watts) - 60wCurrent (Amps) Output - 5 amp3 Ports (9 ChannelsWidth - 3 inchesLength - 6 inchesHeight - 1-1/8 inches RGB LED SPECIFICATIONS: LED Type5050 SMD LED (Waterproof)Color16 solid colors optionsDifferent lights changing modesFlash, Strobe, Fade, and SmoothLED Quantity30 leds/MeterSizeL500cm (5M) x W1.40cm x T0.40cmPackage5 Meters / ReelView angle120çWorking Input Voltage12VDCWorking Current/meter0.6AOutput power36W /5 MeterLuminous Flux5000-7000 Lumens/MeterWorking Tempreture-20ç to 50çDrive ModeContant VoltagePCB BackgroundWhiteWaterproof IP65 Power supply Adapter 110v/240v AC - 12v DC 4 AmpsCE, GS, TUV, UL Approved4 A Power Output (48 watts) 12v DC1.5 Meter Cable - plus 1.5 Meter Main Cable (3.0m Total)Includes original end connector
    • $99.99
    Backorder available

Browse by Vehicle