Headlight Components

When installing HIDs in a dual-filament application, the original factory power signal must be separated into main power for the ballast, and a high beam signal to trigger the bixenon bulb, switching from low beam to high beam. Normally, this is accomplished with a bixenon relay, which connects to the battery and runs to each headlight. However, these can be unreliable as the relay fails over time, and cumbersome to install. These bixenon adapters are a modern, reliable alternative to the traditional wire harness relay. They do not require extra wiring- it's just an adapter! Plug one side into your factory bulb socket, then plug the other side into your HID ballast and bixenon HID bulb. The adapter will power the ballast, and quickly change from low to high beam when you flip the switch in your vehicle. These adapters are fully encapsulated for maximum reliability, and are compatible with all 35W CAN-BUS HID ballasts. Select the size based on the input power signal - H4/9003, H13, 9004, or 9007. The output wires are standard 9006 power to plug into the ballast, and a rectangular 2-pin standard high beam solenoid connector. Included in your order is two adapters, one for each side of your HID kit. Please make sure to select the correct option for bulb size, corresponding to your headlight bulb size. All items are covered by Diode Dynamics 30 days satisfaction guarantee as well as Diode Dynamics 3-year limited warranty.What's Included Bixenon Adapter 9007 Pair Quantity: Two (2) Warranty: 3 year warranty 100 percent Satisfaction Guarantee Specifications Measured Lumens: 3200 (per bulb) Operating Voltage: 9-16V Operating Temperature: -40C to 85C (-40F to 185F) Connector(s): OEM-Size Plug and Play

When installing HIDs in a dual-filament application, the original factory power signal must be separated into main power for the ballast, and a high beam signal to trigger the bixenon bulb, switching from low beam to high beam. Normally, this is accomplished with a bixenon relay, which connects to the battery and runs to each headlight. However, these can be unreliable as the relay fails over time, and cumbersome to install. These bixenon adapters are a modern, reliable alternative to the traditional wire harness relay. They do not require extra wiring- it's just an adapter! Plug one side into your factory bulb socket, then plug the other side into your HID ballast and bixenon HID bulb. The adapter will power the ballast, and quickly change from low to high beam when you flip the switch in your vehicle. These adapters are fully encapsulated for maximum reliability, and are compatible with all 35W CAN-BUS HID ballasts. Select the size based on the input power signal - H4/9003, H13, 9004, or 9007. The output wires are standard 9006 power to plug into the ballast, and a rectangular 2-pin standard high beam solenoid connector. Included in your order is two adapters, one for each side of your HID kit. Please make sure to select the correct option for bulb size, corresponding to your headlight bulb size. All items are covered by Diode Dynamics 30 days satisfaction guarantee as well as Diode Dynamics 3-year limited warranty.What's Included Bixenon Adapter H13 Pair Quantity: Two (2) Warranty: 3 year warranty 100 percent Satisfaction Guarantee Specifications Measured Lumens: 3200 (per bulb) Operating Voltage: 9-16V Operating Temperature: -40C to 85C (-40F to 185F) Connector(s): OEM-Size Plug and Play

When installing HIDs in a dual-filament application, the original factory power signal must be separated into main power for the ballast, and a high beam signal to trigger the bixenon bulb, switching from low beam to high beam. Normally, this is accomplished with a bixenon relay, which connects to the battery and runs to each headlight. However, these can be unreliable as the relay fails over time, and cumbersome to install. These bixenon adapters are a modern, reliable alternative to the traditional wire harness relay. They do not require extra wiring- it's just an adapter! Plug one side into your factory bulb socket, then plug the other side into your HID ballast and bixenon HID bulb. The adapter will power the ballast, and quickly change from low to high beam when you flip the switch in your vehicle. These adapters are fully encapsulated for maximum reliability, and are compatible with all 35W CAN-BUS HID ballasts. Select the size based on the input power signal - H4/9003, H13, 9004, or 9007. The output wires are standard 9006 power to plug into the ballast, and a rectangular 2-pin standard high beam solenoid connector. Included in your order is two adapters, one for each side of your HID kit. Please make sure to select the correct option for bulb size, corresponding to your headlight bulb size. All items are covered by Diode Dynamics 30 days satisfaction guarantee as well as Diode Dynamics 3-year limited warranty.What's Included Bixenon Adapter H4 Pair Quantity: Two (2) Warranty: 3 year warranty 100 percent Satisfaction Guarantee Specifications Measured Lumens: 3200 (per bulb) Operating Voltage: 9-16V Operating Temperature: -40C to 85C (-40F to 185F) Connector(s): OEM-Size Plug and Play

Keep it dry! These breather patches allow air to vent out of a headlight, but block moisture from coming in. This is a big help in preventing condensation from building up inside. Available in packs of 4 or 40 units, the circle stickers are 20mm in diameter, or just over 3/4 inches. They are designed to be placed over a 1/2 inch hole. We recommend using two per lamp to provide maximum airflow. To install, drill a 1/2 inch hole on your lamp. We recommend placing at the side, but you can choose anywhere that has a flat surface. Clean the hole and stick on the patch, holding firmly for 5 seconds to ensure good adhesion. That's it!Details: 20MM or 3/4 Inch Diameter Black Sold at Forty(40)

Keep it dry! These breather patches allow air to vent out of a headlight, but block moisture from coming in. This is a big help in preventing condensation from building up inside. Available in packs of 4 or 40 units, the circle stickers are 20mm in diameter, or just over 3/4 inches. They are designed to be placed over a 1/2 inch hole. We recommend using two per lamp to provide maximum airflow. To install, drill a 1/2 inch hole on your lamp. We recommend placing at the side, but you can choose anywhere that has a flat surface. Clean the hole and stick on the patch, holding firmly for 5 seconds to ensure good adhesion. That's it!Details: 20MM or 3/4 Inch Diameter Black Sold at Four(4)

Hyperblink Fix. Why do you need this module? When your factory turn signal bulbs go out, your vehicle's flasher senses that less power is being used, and it will blink the turn signals quickly to alert you. Since LED bulbs use less power, you get the same fast blinking, known as hyperblinking, even though the LEDs are functioning just fine. Basically, your car thinks the bulbs went out! To slow down the blinking to regular speed, you can add resistors to increase the circuit's power consumption again. However, whenever possible, replacing the flasher with a module like this is the easiest option. Simply unplug your original flasher from under the dash, and swap it with this one to prevent hyperblinking. Quality. The flashers distributed by Diode Dynamics are produced by industry leaders such as Novita. Watch out for generic cheap flashers, as many are slightly too large and may not fit properly in the socket.Features: Compatible with LED bulbs Prevents hyperflash errors Simple swap for original module Direct fitment and proper sizing What's Included In the Box: One LED-compatible flasher relay module Three-year replacement warranty Quantity: One (1) Warranty: 3 year warranty Return Policy: 30-day Return with no restocking fee 100 percent Satisfaction Guarantee Fitment: Plug and play, direct fitment in your vehicle Direct swap for your original flasher module Specifications: Operating Voltage: 9-16V Operating Temperature: -40C to 85C (-40F to 185F) Connector(s): OEM-Size Plug and Play Weight (lb): 0.1250

Hyperblink Fix. Why do you need this module? When your factory turn signal bulbs go out, your vehicle's flasher senses that less power is being used, and it will blink the turn signals quickly to alert you. Since LED bulbs use less power, you get the same fast blinking, known as hyperblinking, even though the LEDs are functioning just fine. Basically, your car thinks the bulbs went out! To slow down the blinking to regular speed, you can add resistors to increase the circuit's power consumption again. However, whenever possible, replacing the flasher with a module like this is the easiest option. Simply unplug your original flasher from under the dash, and swap it with this one to prevent hyperblinking. Quality. The flashers distributed by Diode Dynamics are produced by industry leaders such as Novita. Watch out for generic cheap flashers, as many are slightly too large and may not fit properly in the socket.Features: Compatible with LED bulbs Prevents hyperflash errors Simple swap for original module Direct fitment and proper sizing What's Included In the Box: One LED-compatible flasher relay module Three-year replacement warranty Quantity: One (1) Warranty: 3 year warranty Return Policy: 30-day Return with no restocking fee 100 percent Satisfaction Guarantee Fitment: Plug and play, direct fitment in your vehicle Direct swap for your original flasher module Specifications: Operating Voltage: 9-16V Operating Temperature: -40C to 85C (-40F to 185F) Connector(s): OEM-Size Plug and Play Weight (lb): 0.1250

Aftermarket or OEM? If you're looking to improve visibility on your vehicle at night, you've probably found many options for LED upgrades. Most bulbs on the market are too big to install, don't work with the electrical system, and have no focus or hotspot in the beam pattern. Even if they come close on those aspects, they still aren't anything close to the quality you would find with factory-installed lighting. Like most aftermarket products, most LED bulbs are not engineered and tested for long-term reliability. With the SL1 LED, Diode Dynamics set out to engineer a true OEM-grade solution. With its compact size, optically correct output, flow-simulated cooling, and boost-mode electrical circuit, our SL1 LED patented design is a properly-engineered solution that finally provides a true upgrade in performance, with high reliability: and it's tested and validated to meet those standards, just like OEM lighting. Compact Size. Your order includes two bulbs, to replace the factory bulbs in your vehicle. The bulbs are compact in size, in a patented design that isn't much bigger than the original halogen bulb. The drivers are compact too! If you have a sealed headlamp, they are designed to fit inside. The drivers and bulbs are tested to last over time, even when sealed inside with the heat of the headlamp. Please note that if you are replacing a high beam / DRL bulb, the DRL function may no longer work, depending on your vehicle. Street Legal Output. Don't be fooled by high lumen numbers or projector specific bulbs. Your vehicle's headlights are designed as a system, to focus light. If the light source in that system is out of focus, it doesn't matter how bright it is. You won't have a focused hotspot of light to shine down the road, you'll just have more glare. To correct this, the SL1 LED headlight bulb was engineered with advanced optical design software, which simulates each ray of light in a process known as ray tracing. Using this tool, our engineers perfectly matched the filament location, allowing the SL1 LED to focus light just like your original bulb, preserving the focus and hotspot, with no added glare. It produces a functional pattern on the road, with a stronger hotspot for added distance. This is a safe, functional output, in compliance with photometric standards, which we call Street Legal. Daytime Running Light. Daytime Running Lights (DRLs) are lights that illuminate when the vehicle is running, and when all other lights are turned off. Some vehicles use the high beam bulb as the daytime running light. If your vehicle uses voltage drop for the DRL signal, the SL1 will operate at full brightness. If your vehicle uses PWM for the DRL signal, the SL1 will operate at a reduced brightness level just like your factory halogen bulb would. Tested to Perform. We test the SL1 bulb in factory headlamps, and measure the entire beam pattern using specialized equipment. It's an elaborate affair: a headlight is mounted to a computer-controlled rotating head called a goniometer. Light shines down a tunnel, where a sensor collects data as the headlight is rotated. The entire beam pattern is mapped, and we compare the total output to the original halogen, confirming that the SL1 bulb shines more light in the hotspot, without adding extra glare on the road. The test results speak for themselves: in most lamps, like the 2015 F-150 Halogen lamp, there is 30-70 percent more light in the critical hotspot, with no added glare or spread of light. With proper optical engineering, testing, and validation in the application, we can assure correct optical performance. Staying Cool. You may have seen bulbs that use large straps for cooling, or big fans that just make noise. These bulbs still run hot, pushing the LEDs past their limits, resulting in degradation of output after a few months. When it comes to cooling, proper engineering is required to efficiently remove heat from the bulb. In the SL1, it comes together as a whole system that was extensively tested, with dozens of iterations to achieve the best cooling performance possible. It includes a direct-solder copper core board, thermal phase-change interface material, and thermally-modeled zinc casting get heat to the base, where base fins are designed for aerodynamic performance in conjunction with the flow rate and pressure of the Sunon bearingless microfan. The result is a highly-effective and reliable cooling system, keeping the bulb running at maximum potential. Fitment. With its patented design, the SL1 LED fits where other bulbs won't, without cutting or modification. There's no hanging metal straps, just a compact bulb that plugs right in, with an exclusive reinforced shroud to keep the heat off any other components or wiring. Only slightly larger than a standard halogen bulb, it fits behind dust caps and in tight spaces. The driver and bulb are tested to function when sealed inside the headlamp - no worries about heat buildup! The base sizes on the bulb are also are keyed for exact applications, not one-size-fits-all, and the compact driver easily tucks away. Driven. Rather than a simple buck regulator found on other bulbs, the SL1 uses a unique boost-mode circuit, which prevents thermal imbalance in the LEDs over time - again, just like you would find in OEM LEDs. It also has transient protection for long life in automotive circuits. Diode Dynamics engineers also analyzed dozens of OEM electrical systems, and added current-monitoring circuitry to mimic the electrical characteristic of halogen bulbs, drastically reducing the need for CAN-BUS adapters (though they're still needed on some applications). Reliability. Every part of the SL1 LED was designed for reliability, from the custom wiring with strain reliefs and solderless terminals, to the exclusive zinc castings, to the reinforced high-temperature PP-GF plastics (the same used in halogen bulb bases). Each component was designed and tested, with dozens of variations of each component reviewed until we achieved the maximum performance possible. Finally, the SL1 was put through its paces in our environmental testing chambers - where the bulb successfully performed through dozens of thermal cycles, from -40 through 85 degrees Celsius (-40 to 185F). Whether you're in the Sahara or northern Canada, the SL1 will keep performing for years, and is backed by a three year warranty. Experience. After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly manufacture and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions.Features 9012RAM SL1 LED Headlight LH Single Direct replacement for Ram Chassis Cab low beam headlight bulbs Correct optical focus for increased output with no added glare Perfect No fitment, no modification needed Designed and validated to OEM lighting standards Engineered and Manufactured in USA Pre-set rotation, designed specifically for Dodge Ram 1630 lumens per bulb 6000K cool white color Designed and tested to OEM standards, for long life What's Included In the Box: Two (2) 9012 SL1 LED Headlights Bulbs Two (2) Anti-Flicker Modules to prevent flickering Quantity: Two (2) Warranty: 3 year warranty Return Policy: 30-day Return with no restocking fee 100 percent Satisfaction Guarantee Fitment Application: Low Beam Make: Ram Model: Chassis Cab Years: 2013, 2014, 2015 Electrical Compatibility: PWM/CANBUS System. Requires anti-flicker modules Specifications Measured Lumens: 1630 (per bulb) Color Temp (CCT): 6000K Power (watts): 20.2 Operating Voltage: 5-16V Current (amps at 13.2V): 1.58 Polarity: Polarity Specific Operating Temperature: -40C to 85C (-40F to 185F) LED Emitter: Luxeon Z ES Connector(s): OEM-Size Plug and Play Driver Features: External, Waterproof, Constant Current Driver Dimensions: 2.19 Inch x 1.13 Inch x 0.56 Inch Materials: Copper PCB, PP-TD30 Base, Zinc Heatsink Location: Left Hand Cooling: Active, Mag-Lev Microfan Compliance Ratings: FMVSS108 Beam Pattern, SAE J575 Durability Test Patent: US D824052

Aftermarket or OEM? If you're looking to improve visibility on your vehicle at night, you've probably found many options for LED upgrades. Most bulbs on the market are too big to install, don't work with the electrical system, and have no focus or hotspot in the beam pattern. Even if they come close on those aspects, they still aren't anything close to the quality you would find with factory-installed lighting. Like most aftermarket products, most LED bulbs are not engineered and tested for long-term reliability. With the SL1 LED, Diode Dynamics set out to engineer a true OEM-grade solution. With its compact size, optically correct output, flow-simulated cooling, and boost-mode electrical circuit, our SL1 LED patented design is a properly-engineered solution that finally provides a true upgrade in performance, with high reliability: and it's tested and validated to meet those standards, just like OEM lighting. Compact Size. Your order includes two bulbs, to replace the factory bulbs in your vehicle. The bulbs are compact in size, in a patented design that isn't much bigger than the original halogen bulb. The drivers are compact too! If you have a sealed headlamp, they are designed to fit inside. The drivers and bulbs are tested to last over time, even when sealed inside with the heat of the headlamp. Please note that if you are replacing a high beam / DRL bulb, the DRL function may no longer work, depending on your vehicle. Street Legal Output. Don't be fooled by high lumen numbers or projector specific bulbs. Your vehicle's headlights are designed as a system, to focus light. If the light source in that system is out of focus, it doesn't matter how bright it is. You won't have a focused hotspot of light to shine down the road, you'll just have more glare. To correct this, the SL1 LED headlight bulb was engineered with advanced optical design software, which simulates each ray of light in a process known as ray tracing. Using this tool, our engineers perfectly matched the filament location, allowing the SL1 LED to focus light just like your original bulb, preserving the focus and hotspot, with no added glare. It produces a functional pattern on the road, with a stronger hotspot for added distance. This is a safe, functional output, in compliance with photometric standards, which we call Street Legal. Daytime Running Light. Daytime Running Lights (DRLs) are lights that illuminate when the vehicle is running, and when all other lights are turned off. Some vehicles use the high beam bulb as the daytime running light. If your vehicle uses voltage drop for the DRL signal, the SL1 will operate at full brightness. If your vehicle uses PWM for the DRL signal, the SL1 will operate at a reduced brightness level just like your factory halogen bulb would. Tested to Perform. We test the SL1 bulb in factory headlamps, and measure the entire beam pattern using specialized equipment. It's an elaborate affair: a headlight is mounted to a computer-controlled rotating head called a goniometer. Light shines down a tunnel, where a sensor collects data as the headlight is rotated. The entire beam pattern is mapped, and we compare the total output to the original halogen, confirming that the SL1 bulb shines more light in the hotspot, without adding extra glare on the road. The test results speak for themselves: in most lamps, like the 2015 F-150 Halogen lamp, there is 30-70 percent more light in the critical hotspot, with no added glare or spread of light. With proper optical engineering, testing, and validation in the application, we can assure correct optical performance. Staying Cool. You may have seen bulbs that use large straps for cooling, or big fans that just make noise. These bulbs still run hot, pushing the LEDs past their limits, resulting in degradation of output after a few months. When it comes to cooling, proper engineering is required to efficiently remove heat from the bulb. In the SL1, it comes together as a whole system that was extensively tested, with dozens of iterations to achieve the best cooling performance possible. It includes a direct-solder copper core board, thermal phase-change interface material, and thermally-modeled zinc casting get heat to the base, where base fins are designed for aerodynamic performance in conjunction with the flow rate and pressure of the Sunon bearingless microfan. The result is a highly-effective and reliable cooling system, keeping the bulb running at maximum potential. Fitment. With its patented design, the SL1 LED fits where other bulbs won't, without cutting or modification. There's no hanging metal straps, just a compact bulb that plugs right in, with an exclusive reinforced shroud to keep the heat off any other components or wiring. Only slightly larger than a standard halogen bulb, it fits behind dust caps and in tight spaces. The driver and bulb are tested to function when sealed inside the headlamp - no worries about heat buildup! The base sizes on the bulb are also are keyed for exact applications, not one-size-fits-all, and the compact driver easily tucks away. Driven. Rather than a simple buck regulator found on other bulbs, the SL1 uses a unique boost-mode circuit, which prevents thermal imbalance in the LEDs over time - again, just like you would find in OEM LEDs. It also has transient protection for long life in automotive circuits. Diode Dynamics engineers also analyzed dozens of OEM electrical systems, and added current-monitoring circuitry to mimic the electrical characteristic of halogen bulbs, drastically reducing the need for CAN-BUS adapters (though they're still needed on some applications). Reliability. Every part of the SL1 LED was designed for reliability, from the custom wiring with strain reliefs and solderless terminals, to the exclusive zinc castings, to the reinforced high-temperature PP-GF plastics (the same used in halogen bulb bases). Each component was designed and tested, with dozens of variations of each component reviewed until we achieved the maximum performance possible. Finally, the SL1 was put through its paces in our environmental testing chambers - where the bulb successfully performed through dozens of thermal cycles, from -40 through 85 degrees Celsius (-40 to 185F). Whether you're in the Sahara or northern Canada, the SL1 will keep performing for years, and is backed by a three year warranty. Experience. After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly manufacture and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions.Features 9012RAM SL1 LED Headlight RH Single Direct replacement for Ram Chassis Cab low beam headlight bulbs Correct optical focus for increased output with no added glare Perfect No fitment, no modification needed Designed and validated to OEM lighting standards Engineered and Manufactured in USA Pre-set rotation, designed specifically for Dodge Ram 1630 lumens per bulb 6000K cool white color Designed and tested to OEM standards, for long life What's Included In the Box: Two (2) 9012 SL1 LED Headlights Bulbs Two (2) Anti-Flicker Modules to prevent flickering Quantity: Two (2) Warranty: 3 year warranty Return Policy: 30-day Return with no restocking fee 100 percent Satisfaction Guarantee Fitment Application: Low Beam Make: Ram Model: Chassis Cab Years: 2013, 2014, 2015 Electrical Compatibility: PWM/CANBUS System. Requires anti-flicker modules Specifications Measured Lumens: 1630 (per bulb) Color Temp (CCT): 6000K Power (watts): 20.2 Operating Voltage: 5-16V Current (amps at 13.2V): 1.58 Polarity: Polarity Specific Operating Temperature: -40C to 85C (-40F to 185F) LED Emitter: Luxeon Z ES Connector(s): OEM-Size Plug and Play Driver Features: External, Waterproof, Constant Current Driver Dimensions: 2.19 Inch x 1.13 Inch x 0.56 Inch Materials: Copper PCB, PP-TD30 Base, Zinc Heatsink Location: Right Hand Cooling: Active, Mag-Lev Microfan Compliance Ratings: FMVSS108 Beam Pattern, SAE J575 Durability Test Patent: US D824052

Easy to work with. Properly reseal any headlamp or tail lamp and protect against moisture ingress with Diode Dynamics Butyl Headlight Sealant! This new and improved sealant rope was designed specifically for headlamps, with a firmer composition than auto-store windshield glue. This makes it easy to work with, without causing a sticky mess. Each roll comes with 20 feet of butyl, enough to reseal two large headlamps. Protection from moisture. Use it to reseal any headlamp after installing Diode Dynamics LED products! Warm it up a bit, place it into the headlight channel, and clamp together while heating, making sure the lens is fastened to the housing. With a little practice, you'll have a factory-quality seal, with quality butyl that will protect against moisture ingress for years to come. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.Features: Automotive grade butyl sealant Easy to work with, no sticky mess Standard black color 20 feet long (enough to reseal two large headlamps) 7mm diameter, designed to fit directly in headlamp channels Specifications: Length: 20 feet Diameter: 7mm Color: Black

Upgrade. Upgrade your headlights with our D6A HID replacement bulbs! If your vehicle is equipped with HID headlights, these are a perfect direct replacement. While the factory bulbs use 25W of power, these bulbs use 35W, so they provide an increase in total light output, giving you better visibility at night. You can also improve your vehicles styling with a cooler color temperature. Quality. There are all kinds of HID bulbs on the market, but these are the best combination of quality, without a high price tag. Manufactured in a fully automated environment, they have high output, and are DOT/SAE and ECE compliant in arc position and size. Using German quartz and American salts, no expense is spared in their construction. This leads to a long, reliable life, and excellent color. Color. While some HIDs on the market give off a green or purple tint, these bulbs will provide a pure white color on the road. These HIDs are available in true, accurate color temperatures, which we measure at our photometric test lab. The white color created by these bulbs will provide more visible light on the road, and wont cause distraction. 4300K is a natural white output, as seen on vehicles with factory HIDs. It will not have any blue tint to its color, and might appear slightly warm. 5000K is a pure white output, without any warm hint, and no tint of blue either. 6000K is our most popular color, which produces an ice white color. It matches best with most LEDs. Experience. After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. We pride ourselves on offering only the best possible LED solutions.Features: Direct replacement for factory OEM HID headlight bulbs Provides increase in total light output Perfect alignment, with easy installation True colors, with no variance Color Temperature: 6000K Sold As: Pair

Upgrade. Upgrade your headlights with our D6A HID replacement bulbs! If your vehicle is equipped with HID headlights, these are a perfect direct replacement. While the factory bulbs use 25W of power, these bulbs use 35W, so they provide an increase in total light output, giving you better visibility at night. You can also improve your vehicles styling with a cooler color temperature. Quality. There are all kinds of HID bulbs on the market, but these are the best combination of quality, without a high price tag. Manufactured in a fully automated environment, they have high output, and are DOT/SAE and ECE compliant in arc position and size. Using German quartz and American salts, no expense is spared in their construction. This leads to a long, reliable life, and excellent color. Color. While some HIDs on the market give off a green or purple tint, these bulbs will provide a pure white color on the road. These HIDs are available in true, accurate color temperatures, which we measure at our photometric test lab. The white color created by these bulbs will provide more visible light on the road, and wont cause distraction. 4300K is a natural white output, as seen on vehicles with factory HIDs. It will not have any blue tint to its color, and might appear slightly warm. 5000K is a pure white output, without any warm hint, and no tint of blue either. 6000K is our most popular color, which produces an ice white color. It matches best with most LEDs. Experience. After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. We pride ourselves on offering only the best possible LED solutions.Features: Direct replacement for factory OEM HID headlight bulbs Provides increase in total light output Perfect alignment, with easy installation True colors, with no variance Color Temperature: 6000K Sold As: Single