Gas Pedals

Products: 112 of 12
  • Bare Foot Gas Pedal
    Bare Foot Gas Pedal
    • $11.95
    2 left in stock. Backorder available
  • Mr. Gasket 9645 Barefoot Style Gas Pedal Pad
    Mr. Gasket 9645 Barefoot Style Gas Pedal Pad
    • $10.95
    2 left in stock. Backorder available
  • 67-72 Chevy & GMC C/K Pickup Truck Brake or Clutch Pedal Pad Stainless Trim
    1967-1972 Chevy & GMC Truck Clutch or Brake Pedal Pad Stainless Trim1 (One) 1967-72 Chevrolet / GMC Pickup Truck Pedal Pad Stainless TrimFits Brake or ClutchDeluxe Trim is Stainless SteelDesigned for Use with Rubber Pedal PadWe Also Have the Pedal Pad Available in Our StoreQty: 1             Fits: 67-68-69-70-71-72-1967-1968-1969-1970-1971-1972 Chevrolet / GMC Pick Up Trucks
    • $7.18
    2 left in stock. Backorder available
  • 67-72 Chevy & GMC C/K Pickup Truck Brake or Clutch Rubber Pedal Pad
    1967-1972 Chevy & GMC Truck Clutch or Brake Rubber Pedal Pad1 (One) 1967-72 Chevrolet / GMC Pickup Truck Pedal PadFits Brake or ClutchPedal is Correctly Molded with Same Curve as the OriginalPedal Designed for Use with Stainless TrimWe Also Have the Stainless Trim Available in Our StoreQty: 1 Pedal Pad             Fits: 67-68-69-70-71-72-1967-1968-1969-1970-1971-1972 Chevrolet / GMC Pick Up Trucks
    • $3.49
    2 left in stock. Backorder available
  • 67-72 Chevy & GMC Truck Brake & Clutch Rubber Pedal Pad & Stainless Trim Pair
    1967-1972 Chevy & GMC Truck Clutch & Brake Rubber Pedal Pads & Stainless Trim Kit2 (Two) 1967-72 Chevrolet / GMC Pickup Truck Pedal Pads & Stainless Trim PiecesFits Brake & ClutchPedals are Correctly Molded with Same Curve as the OriginalDeluxe Trim is Stainless SteelQty: 2 Pedal Pads & 2 Stainless Trim Pieces            Fits: 67-68-69-70-71-72-1967-1968-1969-1970-1971-1972 Chevrolet / GMC Pick Up Trucks
    • $21.36
    1 left in stock. Backorder available
  • 67-72 Chevy & GMC C/K Pickup Truck Brake & Clutch Pedal Pad Stainless Trim Pair
    1967-1972 Chevy & GMC Truck Clutch & Brake Pedal Pad Stainless Trim Pair2 (Two) 1967-72 Chevrolet / GMC Pickup Truck Pedal Pad Stainless Trim PiecesFits Brake & ClutchDeluxe Trim is Stainless SteelDesigned for Use with Rubber Pedal PadWe Also Have the Pedal Pads Available in Our StoreQty: 2             Fits: 67-68-69-70-71-72-1967-1968-1969-1970-1971-1972 Chevrolet / GMC Pick Up Trucks
    • $14.36
    1 left in stock. Backorder available
  • 67-72 Chevy & GMC C/K Pickup Truck Brake & Clutch Rubber Pedal Pad Pair
    1967-1972 Chevy & GMC Truck Clutch & Brake Rubber Pedal Pad Pair2 (Two) 1967-72 Chevrolet / GMC Pickup Truck Pedal PadsFits Brake & ClutchPedals are Correctly Molded with Same Curve as the OriginalPedals Designed for Use with Stainless TrimWe Also Have the Stainless Trim Available in Our StoreQty: 2 Pedal Pads            Fits: 67-68-69-70-71-72-1967-1968-1969-1970-1971-1972 Chevrolet / GMC Pick Up Trucks
    • $6.99
    1 left in stock. Backorder available
  • 67-72 Chevy & GMC C/K Truck Brake or Clutch Rubber Pedal Pad & Stainless Trim
    1967-1972 Chevy & GMC Truck Clutch & Brake Rubber Pedal Pad & Stainless Trim Set1 (One) 1967-72 Chevrolet / GMC Pickup Truck Pedal Pad & Stainless Trim PieceFits Brake or ClutchPedal is Correctly Molded with Same Curve as the OriginalDeluxe Trim is Stainless SteelQty: 1 Pedal Pad & 1 Stainless Piece            Fits: 67-68-69-70-71-72-1967-1968-1969-1970-1971-1972 Chevrolet / GMC Pick Up Trucks
    • $10.68
    2 left in stock. Backorder available
  • Accelerator Pedal / Arm Set - Chrome | Pedals, Floor, / Shifter Parts
    "Spoon" Style Gas Pedal and Arm Set Available in Chrome Splined Adjustment Universal Fit
    • $19.40
  • Stainless Steel Accelerator Gas Pedal Assembly | Octane Lighting
    "Spoon" Style Gas Pedal Assembly and Arm Set Available in Stainless Steel Splined Adjustment Universal Fit Accelerator Pedal Assembly
    • $50.49
  • Stainless Chrome Barefoot Gas Pedal Cover | Octane Lighting
    Barefoot Accelerator and Dimmer Switch Pedal Cover for Vintage CarsS1020: 9" Chrome Gas Pedal Cover Simply Mounts Over your Existing Accelerator Pedal, Mounting Straps and Screws are IncludedUniversal Fit Barefoot Gas Pedal
    • $18.59
  • Mr. Gasket 9645 Barefoot Style Gas Pedal Pad
    Mr. Gasket Barefoot Style Gas Pedal Pads are designed to provide a firm grip for excellent braking. They feature contrasting chrome grid which ensures extreme durability. These pads are clamped over the original pedal for grip. They require a no-drill installation and are backed by a limited warranty.
    • $19.99
    1 left in stock. Backorder available
  • 5-3/4" Motorcycle Stock 6v LED Headlamp w/ Chrome Moto Bucket Bottom Mount EACH
    ONE - NEW - MOTORCYCLE 5-3/4" INCH ROUND STOCK GLASS HEADLAMP & CHROME METAL HOUSING INCLUDES (1) HIGH INTENSITY 6v 3RD GENERATION LED H4 INTENSE WHITE LIGHT BULB! - Fits Harley Davidson Motorcycle with 5.75" Headlight Buckets - One New 6-Volt LED Headlight w/ Moto Bucket SAE/DOT Approved - Street LegalDurable Chrome Bucket w/ Wiring & PlugBottom Stud Mounted BucketChrome Finish2600 Lumen Low Beam / 4000 Lumen High BeamDaylight White Brightness360° Light Beam AngleBrighter and Whiter than Stock Headlights High & Low Beam Function LED Bulb Works with Factory Wiring Original 3 Prong Plug Design (Plug & Play) High Quality Stock Style Glass Faced & Metal Backed Semi-Sealed Beam - Removable / Replaceable Light Bulbs Direct Replacement for Stock Headlights Fits Motorcycles with 5-3/4" Round Headlight Housing This listing is for one new 5.75" round 6 volt high/low beam stock style H4 conversion 3rd Generation LED motorcycle headlight with a chrome headlight bucket. Includes one 3rd Gen LED Xenon 6500k super white LED bulb. This is a glass faced headlight. These are very good quality and very bright! These headlights have a domed clear glass face unlike all all the others on the market that have a flat plastic face. These light up much brighter and whiter than the standard stock style incandescent headlight bulbs. These have the original 3 prong plug design on the back so they will plug right into the original wiring harness (no wiring modification needed). These will fit motorcycles that have 5.75 inch in diameter headlight buckets with stud mounts. Bucket is metal with a chrome finish and a bottom stud mount.  We will take extra care in packaging. Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,600 / 4,000 Lumen Bulbs 2,600 / 4,000 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,600 Lumens of light and draws 26 watts of energy on the low beam setting; but produces 4,000 Lumens of light and draws 40 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,600 Lumens Low Beam / 4,00 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle26 Watts Low Beam / 40 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for CoolingNewest Technology All-In-One Design: No Ballast or Driver RequiredLED Protection Circuit to Protect from Reverse Polarity, Low Voltage or High Voltage SpikesSmart & Efficient Cooling System Uses Built-In Cooling FanGreater Visibility - 3x Brighter than Factory Halogen BulbsHigh Luminous Efficacy Flux: 2,600/4,000lmHigh Quality Aluminum Heat Sink Ensures Proper Temperature RegulationLower Power Consumption than Halogen BulbsVibration Proof Design30,000 Hour LifespanEasy Plug & Play Installation - No Modification RequiredNo Splicing of Harnesses Required for LED BulbsUses 75% LESS Power than Halogen or HID Bulbs3x Brighter than Stock Halogen BulbsOBC Error Free OperationDramatically Improves Visibility at Night SAE & DOT APPROVED
    • $79.95
    2 left in stock.
  • 5-3/4" Motorcycle Stock 6v LED Headlamp w/ Chrome Moto Bucket Bottom Mount EACH
    ONE - NEW - MOTORCYCLE 5-3/4" INCH ROUND STOCK GLASS HEADLAMP & CHROME METAL HOUSING INCLUDES (1) HIGH INTENSITY 6v 3RD GENERATION LED H4 INTENSE WHITE LIGHT BULB! - Fits Harley Davidson Motorcycle with 5.75" Headlight Buckets - One New 6-Volt LED Headlight w/ Moto Bucket SAE/DOT Approved - Street LegalDurable Chrome Bucket w/ Wiring & PlugBottom Stud Mounted BucketChrome Finish2600 Lumen Low Beam / 4000 Lumen High BeamDaylight White Brightness360° Light Beam AngleBrighter and Whiter than Stock Headlights High & Low Beam Function LED Bulb Works with Factory Wiring Original 3 Prong Plug Design (Plug & Play) High Quality Stock Style Glass Faced & Metal Backed Semi-Sealed Beam - Removable / Replaceable Light Bulbs Direct Replacement for Stock Headlights Fits Motorcycles with 5-3/4" Round Headlight Housing This listing is for one new 5.75" round 6 volt high/low beam stock style H4 conversion 3rd Generation LED motorcycle headlight with a chrome headlight bucket. Includes one 3rd Gen LED Xenon 6500k super white LED bulb. This is a glass faced headlight. These are very good quality and very bright! These headlights have a domed clear glass face unlike all all the others on the market that have a flat plastic face. These light up much brighter and whiter than the standard stock style incandescent headlight bulbs. These have the original 3 prong plug design on the back so they will plug right into the original wiring harness (no wiring modification needed). These will fit motorcycles that have 5.75 inch in diameter headlight buckets with stud mounts. Bucket is metal with a chrome finish and a bottom stud mount.  We will take extra care in packaging. Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,600 / 4,000 Lumen Bulbs 2,600 / 4,000 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,600 Lumens of light and draws 26 watts of energy on the low beam setting; but produces 4,000 Lumens of light and draws 40 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,600 Lumens Low Beam / 4,00 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle26 Watts Low Beam / 40 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for CoolingNewest Technology All-In-One Design: No Ballast or Driver RequiredLED Protection Circuit to Protect from Reverse Polarity, Low Voltage or High Voltage SpikesSmart & Efficient Cooling System Uses Built-In Cooling FanGreater Visibility - 3x Brighter than Factory Halogen BulbsHigh Luminous Efficacy Flux: 2,600/4,000lmHigh Quality Aluminum Heat Sink Ensures Proper Temperature RegulationLower Power Consumption than Halogen BulbsVibration Proof Design30,000 Hour LifespanEasy Plug & Play Installation - No Modification RequiredNo Splicing of Harnesses Required for LED BulbsUses 75% LESS Power than Halogen or HID Bulbs3x Brighter than Stock Halogen BulbsOBC Error Free OperationDramatically Improves Visibility at Night SAE & DOT APPROVED
    • $79.95
    2 left in stock.
  • 5-3/4" Motorcycle Stock 12v LED Headlamp w/ Chrome Moto Bucket Bottom Mount EACH
    ONE - NEW - MOTORCYCLE 5-3/4" INCH ROUND STOCK GLASS HEADLAMP & CHROME METAL HOUSING INCLUDES (1) HIGH INTENSITY 3RD GENERATION LED H4 INTENSE WHITE LIGHT BULB!SAE & DOT APPROVED - Fits Harley Davidson Motorcycle with 5.75" Headlight Buckets - One New LED Headlight w/ Moto Bucket SAE/DOT Approved - Street LegalDurable Chrome Bucket w/ Wiring & PlugBottom Stud Mounted BucketChrome Finish2000 Lumen Low Beam / 2500 Lumen High BeamDaylight White Brightness360° Light Beam AngleBrighter and Whiter than Stock Headlights High & Low Beam Function LED Bulb Works with Factory Wiring Original 3 Prong Plug Design (Plug & Play) High Quality Stock Style Glass Faced & Metal Backed Semi-Sealed Beam - Removable / Replaceable Light Bulbs Direct Replacement for Stock Headlights Fits Motorcycles with 5-3/4" Round Headlight Housing This listing is for one new 5.75" round 12 volt high/low beam stock style H4 conversion 3rd Generation LED motorcycle headlight with a chrome headlight bucket. Includes one 3rd Gen LED Xenon 6500k super white LED bulb. This is a glass faced headlight. These are very good quality and very bright! These headlights have a domed clear glass face unlike all all the others on the market that have a flat plastic face. These light up much brighter and whiter than the standard stock style incandescent headlight bulbs. These have the original 3 prong plug design on the back so they will plug right into the original wiring harness (no wiring modification needed). These will fit motorcycles that have 5.75 inch in diameter headlight buckets with stud mounts. Bucket is metal with a chrome finish and a bottom stud mount.  We will take extra care in packaging. Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,500 Lumen Bulbs 2,500 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,000 Lumens of light and draws 18 watts of energy on the low beam setting; but produces 2,500 Lumens of light and draws 24 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,000 Lumens Low Beam / 2,500 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle18 Watts Low Beam / 24 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for CoolingNewest Technology All-In-One Design: No Ballast or Driver RequiredLED Protection Circuit to Protect from Reverse Polarity, Low Voltage or High Voltage SpikesSmart & Efficient Cooling System Uses Built-In Cooling FanGreater Visibility - 3x Brighter than Factory Halogen BulbsHigh Luminous Efficacy Flux: 2,500/2,000lmHigh Quality Aluminum Heat Sink Ensures Proper Temperature RegulationLower Power Consumption than Halogen BulbsVibration Proof Design30,000 Hour LifespanEasy Plug & Play Installation - No Modification RequiredNo Splicing of Harnesses Required for LED BulbsUses 75% LESS Power than Halogen or HID Bulbs3x Brighter than Stock Halogen BulbsOBC Error Free OperationDramatically Improves Visibility at Night
    • $74.95
    2 left in stock.
  • 5-3/4" Motorcycle Stock 12v LED Headlamp w/ Chrome Moto Bucket Bottom Mount EACH
    ONE - NEW - MOTORCYCLE 5-3/4" INCH ROUND STOCK GLASS HEADLAMP & CHROME METAL HOUSING INCLUDES (1) HIGH INTENSITY 3RD GENERATION LED H4 INTENSE WHITE LIGHT BULB!SAE & DOT APPROVED - Fits Harley Davidson Motorcycle with 5.75" Headlight Buckets - One New LED Headlight w/ Moto Bucket SAE/DOT Approved - Street LegalDurable Chrome Bucket w/ Wiring & PlugBottom Stud Mounted BucketChrome Finish2000 Lumen Low Beam / 2500 Lumen High BeamDaylight White Brightness360° Light Beam AngleBrighter and Whiter than Stock Headlights High & Low Beam Function LED Bulb Works with Factory Wiring Original 3 Prong Plug Design (Plug & Play) High Quality Stock Style Glass Faced & Metal Backed Semi-Sealed Beam - Removable / Replaceable Light Bulbs Direct Replacement for Stock Headlights Fits Motorcycles with 5-3/4" Round Headlight Housing This listing is for one new 5.75" round 12 volt high/low beam stock style H4 conversion 3rd Generation LED motorcycle headlight with a chrome headlight bucket. Includes one 3rd Gen LED Xenon 6500k super white LED bulb. This is a glass faced headlight. These are very good quality and very bright! These headlights have a domed clear glass face unlike all all the others on the market that have a flat plastic face. These light up much brighter and whiter than the standard stock style incandescent headlight bulbs. These have the original 3 prong plug design on the back so they will plug right into the original wiring harness (no wiring modification needed). These will fit motorcycles that have 5.75 inch in diameter headlight buckets with stud mounts. Bucket is metal with a chrome finish and a bottom stud mount.  We will take extra care in packaging. Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,500 Lumen Bulbs 2,500 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,000 Lumens of light and draws 18 watts of energy on the low beam setting; but produces 2,500 Lumens of light and draws 24 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,000 Lumens Low Beam / 2,500 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle18 Watts Low Beam / 24 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for CoolingNewest Technology All-In-One Design: No Ballast or Driver RequiredLED Protection Circuit to Protect from Reverse Polarity, Low Voltage or High Voltage SpikesSmart & Efficient Cooling System Uses Built-In Cooling FanGreater Visibility - 3x Brighter than Factory Halogen BulbsHigh Luminous Efficacy Flux: 2,500/2,000lmHigh Quality Aluminum Heat Sink Ensures Proper Temperature RegulationLower Power Consumption than Halogen BulbsVibration Proof Design30,000 Hour LifespanEasy Plug & Play Installation - No Modification RequiredNo Splicing of Harnesses Required for LED BulbsUses 75% LESS Power than Halogen or HID Bulbs3x Brighter than Stock Halogen BulbsOBC Error Free OperationDramatically Improves Visibility at Night
    • $74.95
    2 left in stock.
  • 67-72 Chevy & GMC C/K Truck Brake or Clutch Rubber Pedal Pad & Stainless Trim
    1967-1972 Chevy & GMC Truck Clutch & Brake Rubber Pedal Pad & Stainless Trim Set1 (One) 1967-72 Chevrolet / GMC Pickup Truck Pedal Pad & Stainless Trim PieceFits Brake or ClutchPedal is Correctly Molded with Same Curve as the OriginalDeluxe Trim is Stainless SteelQty: 1 Pedal Pad & 1 Stainless Piece            Fits: 67-68-69-70-71-72-1967-1968-1969-1970-1971-1972 Chevrolet / GMC Pick Up Trucks
    • $10.68
    2 left in stock. Backorder available
  • Mr. Gasket 9645 Barefoot Style Gas Pedal Pad
    Mr. Gasket 9645 Barefoot Style Gas Pedal Pad
    • $10.95
    2 left in stock. Backorder available
  • Mr. Gasket 9645 Barefoot Style Gas Pedal Pad
    Mr. Gasket Barefoot Style Gas Pedal Pads are designed to provide a firm grip for excellent braking. They feature contrasting chrome grid which ensures extreme durability. These pads are clamped over the original pedal for grip. They require a no-drill installation and are backed by a limited warranty.
    • $19.99
    1 left in stock. Backorder available
  • Stainless Chrome Barefoot Gas Pedal Cover | Octane Lighting
    Barefoot Accelerator and Dimmer Switch Pedal Cover for Vintage CarsS1020: 9" Chrome Gas Pedal Cover Simply Mounts Over your Existing Accelerator Pedal, Mounting Straps and Screws are IncludedUniversal Fit Barefoot Gas Pedal
    • $18.59

Browse by Vehicle