Switches

Products: 2536 of 37
You are on page 3, click to load from start
  • Master Battery Disconnect On/Off Kill Switch Semi-Truck Freightliner Peterbilt
    New Heavy Duty Master Battery Disconnect On/Off Kill Switch with Red HandleCAN BE USED ON ALL SEMI-TRUCKS - FREIGHTLINER, KENWORTH, MACK, PETERBILT, ETC...Battery Disconnect Switch - 2 Terminal Single Pole Single Throw Can be used on Race Cars, Street Rods, Boats, Heavy Machinery or anywhere else you may need a master battery on/off switch. Can be used on 6 Volt, 12 Volt, 24 Volt, or 36 Volt Electrical Systems. The lever is removable so you can make your own  push/pull system if you prefer or if its required. Manual battery disconnect switch with a bright red handleEasier to find in an emergency Mounts studs are 3/8" in diameter. Ratings: 180 amps continuous - 1000 amps intermittent Made of Heavy Duty Die Cast Metal Lever is spring loaded and vibration resistantMounting Hole Size: 0.730" Body Diameter (At largest Point): 2.647" Body Depth (From end of threads to lock washer): 2.980" Overall Depth: 4.216" CROSS REFERENCE: Manufacture Part NumberLONGACRE 45750 AIRTEX AUTOMOTIVE DIVISION   1S2545 BWD AUTOMOTIVE    S678 BWD AUTOMOTIVE    S9905 COLE HERSEE 2484 M-288 M284 ECHLIN SW34 GP SORENSEN BS4 KEMPARTS UL4D NAPA SW34 NIEHOFF      UN129B NIEHOFF      UN129E NIEHOFF      UN77291 POLLACK 51-902, 51-302 STANDARD MOTOR PRODUCTS (SMP) DS248 WELLS    542601 WELLS    SW1765 WELLS    SW273
    • $32.95
    7 left in stock. Backorder available
  • Master Battery Disconnect Red On/Off Kill Switch 2-Post SPST Boat Yacht Marine
    New Heavy Duty Master Battery Disconnect On/Off Kill Switch with Red HandleBattery Disconnect Switch - 2 Terminal Single Pole Single Throw Can be used on Race Cars, Street Rods, Boats, Heavy Machinery or anywhere else you may need a master battery on/off switch. Can be used on 6 Volt, 12 Volt, 24 Volt, or 36 Volt Electrical Systems. The lever is removable so you can make your own  push/pull system if you prefer or if its required. Manual battery disconnect switch with a bright red handleEasier to find in an emergency Mounts studs are 3/8" in diameter. Ratings: 180 amps continuous - 1000 amps intermittent Made of Heavy Duty Die Cast Metal Lever is spring loaded and vibration resistantMounting Hole Size: 0.730" Body Diameter (At largest Point): 2.647" Body Depth (From end of threads to lock washer): 2.980" Overall Depth: 4.216" CROSS REFERENCE: Manufacture Part NumberLONGACRE 45750 AIRTEX AUTOMOTIVE DIVISION   1S2545 BWD AUTOMOTIVE    S678 BWD AUTOMOTIVE    S9905 COLE HERSEE 2484 M-288 M284 ECHLIN SW34 GP SORENSEN BS4 KEMPARTS UL4D NAPA SW34 NIEHOFF      UN129B NIEHOFF      UN129E NIEHOFF      UN77291 POLLACK 51-902, 51-302 STANDARD MOTOR PRODUCTS (SMP) DS248 WELLS    542601 WELLS    SW1765 WELLS    SW273
    • $32.95
    Backorder available
  • Master Battery Power Disconnect On/Off Kill Switch 2-Post 6V / 12V / 24V / 36V
    New Heavy Duty Master Battery Disconnect On/Off Kill Switch with Red HandleBattery Disconnect Switch - 2 Terminal Single Pole Single Throw Can be used on Race Cars, Street Rods, Boats, Heavy Machinery or anywhere else you may need a master battery on/off switch. Can be used on 6 Volt, 12 Volt, 24 Volt, or 36 Volt Electrical Systems. The lever is removable so you can make your own  push/pull system if you prefer or if its required. Manual battery disconnect switch with a bright red handleEasier to find in an emergency Mounts studs are 3/8" in diameter. Ratings: 180 amps continuous - 1000 amps intermittent Made of Heavy Duty Die Cast Metal Lever is spring loaded and vibration resistantMounting Hole Size: 0.730" Body Diameter (At largest Point): 2.647" Body Depth (From end of threads to lock washer): 2.980" Overall Depth: 4.216" CROSS REFERENCE: Manufacture Part NumberLONGACRE 45750 AIRTEX AUTOMOTIVE DIVISION   1S2545 BWD AUTOMOTIVE    S678 BWD AUTOMOTIVE    S9905 COLE HERSEE 2484 M-288 M284 ECHLIN SW34 GP SORENSEN BS4 KEMPARTS UL4D NAPA SW34 NIEHOFF      UN129B NIEHOFF      UN129E NIEHOFF      UN77291 POLLACK 51-902, 51-302 STANDARD MOTOR PRODUCTS (SMP) DS248 WELLS    542601 WELLS    SW1765 WELLS    SW273
    • $32.95
    Backorder available
  • Battery Disconnect On/Off Switch Removable Key Semi Truck Hot Rod Marine Boat
    Battery Disconnect SwitchPrevents Dead Batteries,Theft and Safer to Work on Vehicle with Battery Disconnected 350A Continous, 500A Momentary Metal Switch has Heavy Duty Housing with Die Cast Knob Plastic is Corrosion Proof and has Removable Red Key for Security Semi Truck Application: Kenworth, Peterbilt, Freightliner, Western Star, Volvo, Mack, International IHC and various other heavy duty trucksApplications include automotive and marine as wellRemovable Red Key for Security6-Volt & 12-Volt Applications
    • $14.95
    9 left in stock. Backorder available
  • 16 Amp LED Toggle Switch | Switches / Buttons
    This electrical switch has a small LED light at the end of the switch to make it easier to find in the dark or at night. Switch handles up to 16 amp with 3 prongs.
    • $3.72
  • 1928-29 Stop Light Switch | Switches / Buttons
    1928-29 OEM # A-13480-A Bolted to the Transmission
    • $8.70
  • 1930-31 Stop Light Swtich | Switches / Buttons
    1930-31OEM # A-13480-BBolts on to the Cross Member of FrameFits FORD, MODEL A, 1930, 1931
    • $12.69
  • 1947-59 Headlight Switch | Switches / Buttons
    1947-59 Headlight Switch (12 Volt) Fits CHEVY, TRUCK, 1947-59
    • $28.79
  • Battery Disconnect Switches 350A Cont,500A Momen. | Wiring, Plugs, / Harness
    Prevents Dead Batteries,Theft and Safer to Work on Vehicle with Battery Disconnected350A Continous, 500A MomentaryMetal battery kill switch has Heavy Duty Housing with Die Cast KnobThe plastic on this marine battery disconnect switch is Corrosion Proof and has Removable Red Key for SecurityUniversal Fit
    • $13.79
  • 65-69 Ford Mustang Pull/Push Plunger Headlight Lamp Switch Internal Light Dimmer
    This is New Pull / Push Style 1965-1966-1967-1968-1969 Ford Mustang Headlight Switch. Pull/Push Plunger Style Proper rheostat for internal light dimming Dash Mount Direct replacement No cutting or splicing necessary Built to strict quality control standards Replaces OE Part Number(s): C5ZB-11652A1 , C5ZZ-11654B , D0HZ-11654B, DS150 Fits: FORD  1965-1969             MUSTANG  1966-1969                   1969 L6-200ci 3.3L 1 BBL                   1969 V8-351ci 5.8L 2 BBL                   1969 V8-351ci 5.8L 4 BBL                   1969 V8-390ci 6.4L 4 BBL                   1969 V8-428ci 7.0L 4 BBL                   1969 V8-302ci 5.0L 2 BBL                   1969 L6-250ci 4.1L CARB                   1968 V8-302ci 5.0L 2 BBL                   1968 L6-200ci 3.3L 1 BBL                   1968 V8-289ci 4.7L 2 BBL                   1968 V8-302ci 5.0L 4 BBL                   1968 V8-390ci 6.4L 4 BBL                   1968 V8-427ci 7.0L 4 BBL                   1968 V8-428ci 7.0L 4 BBL                   1967 L6-200ci 3.3L 1 BBL                   1967 V8-289ci 4.7L 2 BBL                   1967 V8-390ci 6.4L 4 BBL                   1966 L6-200ci 3.3L 1 BBL                   1966 V8-289ci 4.7L 2 BBL             MUSTANG BOSS 429   1969-1969                   1969 V8-429ci 7.0L 4 BBL (BOSS 429)             FALCON  1965-1965                   1965 L6-170ci 2.8L 1 BBL                   1965 L6-200ci 3.3L 1 BBL                   1965 V8-289ci 4.7L 2 BBL
    • $12.95
    Backorder available
  • Universal Ignition Switch Starter 4 Position Tractor Trailer Forklift Golf Cart
    Universal Ignition Switch w/ 2 KeysUniversal Ignition Switch For Tractor Trailer, Forklift, Golf Cart, Etc4 Positions: ACC, OFF, IGN/ACC & IGN/STARTComes with 2 KeysMounts on 3/4" HoleKnurled Aluminum Molding NutStud Terminal Posts with Nuts
    • $15.95
    Backorder available
  • Vintage Universal Ignition Switch Starter 2 Keys 4 Position Hot Street Rat Rod
    Universal Vintage Ignition Switch Universal Vintage Ignition Switch For Cars & Trucks4 Positions: ACC, OFF, IGN/ACC & IGN/STARTComes with 2 KeysMounts on 3/4" HoleKnurled Aluminum Molding NutStud Terminal Posts with Nuts
    • $15.95
    Backorder available
Products: 2536 of 37
  • 5-3/4" Motorcycle Stock 6v LED Headlamp w/ Chrome Moto Bucket Bottom Mount EACH
    ONE - NEW - MOTORCYCLE 5-3/4" INCH ROUND STOCK GLASS HEADLAMP & CHROME METAL HOUSING INCLUDES (1) HIGH INTENSITY 6v 3RD GENERATION LED H4 INTENSE WHITE LIGHT BULB! - Fits Harley Davidson Motorcycle with 5.75" Headlight Buckets - One New 6-Volt LED Headlight w/ Moto Bucket SAE/DOT Approved - Street LegalDurable Chrome Bucket w/ Wiring & PlugBottom Stud Mounted BucketChrome Finish2600 Lumen Low Beam / 4000 Lumen High BeamDaylight White Brightness360° Light Beam AngleBrighter and Whiter than Stock Headlights High & Low Beam Function LED Bulb Works with Factory Wiring Original 3 Prong Plug Design (Plug & Play) High Quality Stock Style Glass Faced & Metal Backed Semi-Sealed Beam - Removable / Replaceable Light Bulbs Direct Replacement for Stock Headlights Fits Motorcycles with 5-3/4" Round Headlight Housing This listing is for one new 5.75" round 6 volt high/low beam stock style H4 conversion 3rd Generation LED motorcycle headlight with a chrome headlight bucket. Includes one 3rd Gen LED Xenon 6500k super white LED bulb. This is a glass faced headlight. These are very good quality and very bright! These headlights have a domed clear glass face unlike all all the others on the market that have a flat plastic face. These light up much brighter and whiter than the standard stock style incandescent headlight bulbs. These have the original 3 prong plug design on the back so they will plug right into the original wiring harness (no wiring modification needed). These will fit motorcycles that have 5.75 inch in diameter headlight buckets with stud mounts. Bucket is metal with a chrome finish and a bottom stud mount.  We will take extra care in packaging. Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,600 / 4,000 Lumen Bulbs 2,600 / 4,000 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,600 Lumens of light and draws 26 watts of energy on the low beam setting; but produces 4,000 Lumens of light and draws 40 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,600 Lumens Low Beam / 4,00 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle26 Watts Low Beam / 40 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for CoolingNewest Technology All-In-One Design: No Ballast or Driver RequiredLED Protection Circuit to Protect from Reverse Polarity, Low Voltage or High Voltage SpikesSmart & Efficient Cooling System Uses Built-In Cooling FanGreater Visibility - 3x Brighter than Factory Halogen BulbsHigh Luminous Efficacy Flux: 2,600/4,000lmHigh Quality Aluminum Heat Sink Ensures Proper Temperature RegulationLower Power Consumption than Halogen BulbsVibration Proof Design30,000 Hour LifespanEasy Plug & Play Installation - No Modification RequiredNo Splicing of Harnesses Required for LED BulbsUses 75% LESS Power than Halogen or HID Bulbs3x Brighter than Stock Halogen BulbsOBC Error Free OperationDramatically Improves Visibility at Night SAE & DOT APPROVED
    • $79.95
    2 left in stock.
  • 5-3/4" Motorcycle Stock 6v LED Headlamp w/ Chrome Moto Bucket Bottom Mount EACH
    ONE - NEW - MOTORCYCLE 5-3/4" INCH ROUND STOCK GLASS HEADLAMP & CHROME METAL HOUSING INCLUDES (1) HIGH INTENSITY 6v 3RD GENERATION LED H4 INTENSE WHITE LIGHT BULB! - Fits Harley Davidson Motorcycle with 5.75" Headlight Buckets - One New 6-Volt LED Headlight w/ Moto Bucket SAE/DOT Approved - Street LegalDurable Chrome Bucket w/ Wiring & PlugBottom Stud Mounted BucketChrome Finish2600 Lumen Low Beam / 4000 Lumen High BeamDaylight White Brightness360° Light Beam AngleBrighter and Whiter than Stock Headlights High & Low Beam Function LED Bulb Works with Factory Wiring Original 3 Prong Plug Design (Plug & Play) High Quality Stock Style Glass Faced & Metal Backed Semi-Sealed Beam - Removable / Replaceable Light Bulbs Direct Replacement for Stock Headlights Fits Motorcycles with 5-3/4" Round Headlight Housing This listing is for one new 5.75" round 6 volt high/low beam stock style H4 conversion 3rd Generation LED motorcycle headlight with a chrome headlight bucket. Includes one 3rd Gen LED Xenon 6500k super white LED bulb. This is a glass faced headlight. These are very good quality and very bright! These headlights have a domed clear glass face unlike all all the others on the market that have a flat plastic face. These light up much brighter and whiter than the standard stock style incandescent headlight bulbs. These have the original 3 prong plug design on the back so they will plug right into the original wiring harness (no wiring modification needed). These will fit motorcycles that have 5.75 inch in diameter headlight buckets with stud mounts. Bucket is metal with a chrome finish and a bottom stud mount.  We will take extra care in packaging. Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,600 / 4,000 Lumen Bulbs 2,600 / 4,000 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,600 Lumens of light and draws 26 watts of energy on the low beam setting; but produces 4,000 Lumens of light and draws 40 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,600 Lumens Low Beam / 4,00 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle26 Watts Low Beam / 40 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for CoolingNewest Technology All-In-One Design: No Ballast or Driver RequiredLED Protection Circuit to Protect from Reverse Polarity, Low Voltage or High Voltage SpikesSmart & Efficient Cooling System Uses Built-In Cooling FanGreater Visibility - 3x Brighter than Factory Halogen BulbsHigh Luminous Efficacy Flux: 2,600/4,000lmHigh Quality Aluminum Heat Sink Ensures Proper Temperature RegulationLower Power Consumption than Halogen BulbsVibration Proof Design30,000 Hour LifespanEasy Plug & Play Installation - No Modification RequiredNo Splicing of Harnesses Required for LED BulbsUses 75% LESS Power than Halogen or HID Bulbs3x Brighter than Stock Halogen BulbsOBC Error Free OperationDramatically Improves Visibility at Night SAE & DOT APPROVED
    • $79.95
    2 left in stock.
  • 5-3/4" Motorcycle Stock 12v LED Headlamp w/ Chrome Moto Bucket Bottom Mount EACH
    ONE - NEW - MOTORCYCLE 5-3/4" INCH ROUND STOCK GLASS HEADLAMP & CHROME METAL HOUSING INCLUDES (1) HIGH INTENSITY 3RD GENERATION LED H4 INTENSE WHITE LIGHT BULB!SAE & DOT APPROVED - Fits Harley Davidson Motorcycle with 5.75" Headlight Buckets - One New LED Headlight w/ Moto Bucket SAE/DOT Approved - Street LegalDurable Chrome Bucket w/ Wiring & PlugBottom Stud Mounted BucketChrome Finish2000 Lumen Low Beam / 2500 Lumen High BeamDaylight White Brightness360° Light Beam AngleBrighter and Whiter than Stock Headlights High & Low Beam Function LED Bulb Works with Factory Wiring Original 3 Prong Plug Design (Plug & Play) High Quality Stock Style Glass Faced & Metal Backed Semi-Sealed Beam - Removable / Replaceable Light Bulbs Direct Replacement for Stock Headlights Fits Motorcycles with 5-3/4" Round Headlight Housing This listing is for one new 5.75" round 12 volt high/low beam stock style H4 conversion 3rd Generation LED motorcycle headlight with a chrome headlight bucket. Includes one 3rd Gen LED Xenon 6500k super white LED bulb. This is a glass faced headlight. These are very good quality and very bright! These headlights have a domed clear glass face unlike all all the others on the market that have a flat plastic face. These light up much brighter and whiter than the standard stock style incandescent headlight bulbs. These have the original 3 prong plug design on the back so they will plug right into the original wiring harness (no wiring modification needed). These will fit motorcycles that have 5.75 inch in diameter headlight buckets with stud mounts. Bucket is metal with a chrome finish and a bottom stud mount.  We will take extra care in packaging. Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,500 Lumen Bulbs 2,500 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,000 Lumens of light and draws 18 watts of energy on the low beam setting; but produces 2,500 Lumens of light and draws 24 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,000 Lumens Low Beam / 2,500 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle18 Watts Low Beam / 24 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for CoolingNewest Technology All-In-One Design: No Ballast or Driver RequiredLED Protection Circuit to Protect from Reverse Polarity, Low Voltage or High Voltage SpikesSmart & Efficient Cooling System Uses Built-In Cooling FanGreater Visibility - 3x Brighter than Factory Halogen BulbsHigh Luminous Efficacy Flux: 2,500/2,000lmHigh Quality Aluminum Heat Sink Ensures Proper Temperature RegulationLower Power Consumption than Halogen BulbsVibration Proof Design30,000 Hour LifespanEasy Plug & Play Installation - No Modification RequiredNo Splicing of Harnesses Required for LED BulbsUses 75% LESS Power than Halogen or HID Bulbs3x Brighter than Stock Halogen BulbsOBC Error Free OperationDramatically Improves Visibility at Night
    • $74.95
    2 left in stock.
  • 5-3/4" Motorcycle Stock 12v LED Headlamp w/ Chrome Moto Bucket Bottom Mount EACH
    ONE - NEW - MOTORCYCLE 5-3/4" INCH ROUND STOCK GLASS HEADLAMP & CHROME METAL HOUSING INCLUDES (1) HIGH INTENSITY 3RD GENERATION LED H4 INTENSE WHITE LIGHT BULB!SAE & DOT APPROVED - Fits Harley Davidson Motorcycle with 5.75" Headlight Buckets - One New LED Headlight w/ Moto Bucket SAE/DOT Approved - Street LegalDurable Chrome Bucket w/ Wiring & PlugBottom Stud Mounted BucketChrome Finish2000 Lumen Low Beam / 2500 Lumen High BeamDaylight White Brightness360° Light Beam AngleBrighter and Whiter than Stock Headlights High & Low Beam Function LED Bulb Works with Factory Wiring Original 3 Prong Plug Design (Plug & Play) High Quality Stock Style Glass Faced & Metal Backed Semi-Sealed Beam - Removable / Replaceable Light Bulbs Direct Replacement for Stock Headlights Fits Motorcycles with 5-3/4" Round Headlight Housing This listing is for one new 5.75" round 12 volt high/low beam stock style H4 conversion 3rd Generation LED motorcycle headlight with a chrome headlight bucket. Includes one 3rd Gen LED Xenon 6500k super white LED bulb. This is a glass faced headlight. These are very good quality and very bright! These headlights have a domed clear glass face unlike all all the others on the market that have a flat plastic face. These light up much brighter and whiter than the standard stock style incandescent headlight bulbs. These have the original 3 prong plug design on the back so they will plug right into the original wiring harness (no wiring modification needed). These will fit motorcycles that have 5.75 inch in diameter headlight buckets with stud mounts. Bucket is metal with a chrome finish and a bottom stud mount.  We will take extra care in packaging. Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,500 Lumen Bulbs 2,500 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,000 Lumens of light and draws 18 watts of energy on the low beam setting; but produces 2,500 Lumens of light and draws 24 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,000 Lumens Low Beam / 2,500 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle18 Watts Low Beam / 24 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for CoolingNewest Technology All-In-One Design: No Ballast or Driver RequiredLED Protection Circuit to Protect from Reverse Polarity, Low Voltage or High Voltage SpikesSmart & Efficient Cooling System Uses Built-In Cooling FanGreater Visibility - 3x Brighter than Factory Halogen BulbsHigh Luminous Efficacy Flux: 2,500/2,000lmHigh Quality Aluminum Heat Sink Ensures Proper Temperature RegulationLower Power Consumption than Halogen BulbsVibration Proof Design30,000 Hour LifespanEasy Plug & Play Installation - No Modification RequiredNo Splicing of Harnesses Required for LED BulbsUses 75% LESS Power than Halogen or HID Bulbs3x Brighter than Stock Halogen BulbsOBC Error Free OperationDramatically Improves Visibility at Night
    • $74.95
    2 left in stock.
You are on page 3, click to load from start
  • Master Battery Disconnect On/Off Kill Switch Semi-Truck Freightliner Peterbilt
    New Heavy Duty Master Battery Disconnect On/Off Kill Switch with Red HandleCAN BE USED ON ALL SEMI-TRUCKS - FREIGHTLINER, KENWORTH, MACK, PETERBILT, ETC...Battery Disconnect Switch - 2 Terminal Single Pole Single Throw Can be used on Race Cars, Street Rods, Boats, Heavy Machinery or anywhere else you may need a master battery on/off switch. Can be used on 6 Volt, 12 Volt, 24 Volt, or 36 Volt Electrical Systems. The lever is removable so you can make your own  push/pull system if you prefer or if its required. Manual battery disconnect switch with a bright red handleEasier to find in an emergency Mounts studs are 3/8" in diameter. Ratings: 180 amps continuous - 1000 amps intermittent Made of Heavy Duty Die Cast Metal Lever is spring loaded and vibration resistantMounting Hole Size: 0.730" Body Diameter (At largest Point): 2.647" Body Depth (From end of threads to lock washer): 2.980" Overall Depth: 4.216" CROSS REFERENCE: Manufacture Part NumberLONGACRE 45750 AIRTEX AUTOMOTIVE DIVISION   1S2545 BWD AUTOMOTIVE    S678 BWD AUTOMOTIVE    S9905 COLE HERSEE 2484 M-288 M284 ECHLIN SW34 GP SORENSEN BS4 KEMPARTS UL4D NAPA SW34 NIEHOFF      UN129B NIEHOFF      UN129E NIEHOFF      UN77291 POLLACK 51-902, 51-302 STANDARD MOTOR PRODUCTS (SMP) DS248 WELLS    542601 WELLS    SW1765 WELLS    SW273
    • $32.95
    7 left in stock. Backorder available
  • Pick Up Truck Brake Stop Light Control Switch OEM Replacement NEW
     One - New Pick Up Truck Replacement Brake Stoplight switch. See compatibility chart for full fitment.Detailed item info Product DetailsSub Type:Brake Light SwitchNotes:Description--Brake Light SwitchPackage Height--3.375 INPackage Length--2.000 INPackage Weight--0.07 LBSPackage Width--1.438 IN
    • $4.75
  • Chevy GM GMC Pontiac Cadillac Headlight Switch Headlamp Light Bulb Control HS09
    THIS IS FOR A NEW HEADLIGHT CONTROL SWITCH.
    • $19.95
  • Master Battery Disconnect On/Off Kill Switch 2-Post Spst Race Car Nascar Nhra
    New Heavy Duty Master Battery Disconnect On/Off Kill Switch Single Pole Single Throw Can be used on Race Cars, Street Rods, Boats, Heavy Machinery or anywhere else you may need a master battery on/off switch. Can be used on 6 Volt, 12 Volt, 24 Volt, or 36 Volt Electrical Systems. The lever is removable so you can make your own  push/pull system if you prefer or if its required. Mounts studs are 3/8" in diameter. Ratings: 180 amps continuous - 1000 amps intermittent Made of Heavy Duty Die Cast Metal Lever is spring loaded and vibration resistant CROSS REFERENCE: Manufacture Part Number AIRTEX AUTOMOTIVE DIVISION   1S2545 BWD AUTOMOTIVE    S678 BWD AUTOMOTIVE    S9905 COLE HERSEE 2484 M-288 M284 ECHLIN SW34 GP SORENSEN BS4 KEMPARTS UL4D NAPA SW34 NIEHOFF      UN129B NIEHOFF      UN129E NIEHOFF      UN77291 POLLACK 51-902, 51-302 STANDARD MOTOR PRODUCTS (SMP) DS248 WELLS    542601 WELLS    SW1765 WELLS    SW273
    • $19.95

Browse by Vehicle