Gauges

Product detailsBrandDakota DigitalMaterialAlloyIncluded Displays: Speedometer, Tachometer, Oil Pressure, Water Temp, Voltmeter, Fuel Level.Also shown in digital message center: Odometer, Trip Odometer, Resettable Service Odometer, Clock, Hour Meter, 0-60 MPH Timer...Various Indicators can be displayed: Turn Signals, High Beam, Check Engine, Parking Brake, Cruise Control…Necessary sensors included for oil pressure (1/8” NPT), Water Temp (1/8" with bushings for 1/4", 3/8", 1/2” NPT as well 12mm and 16mm for GM & LS applications) and speedometer pulse generator.The new VHX Systems fit directly into the stock dash of a 1961-62 Chevy Impala without modification. The upper (speedometer/voltmeter/fuel level/message centers) display utilizes the stock trim ring, whereas the lower displays (tachometer/oil pressure/water temp) include machined aluminum/chromed new instrument housings. Dashboard and Chrome Speedometer Trim/ Bezel are NOT included.VHX System Includes:Analog GaugesSpeedometer - 0-140 MPH (optional metric version 0-225 kmh)Tachometer - 0-8000 RPMOil Pressure - 0-80 psiWater Temperature - 100-260ºF (optional metric version 40-120ºC)Fuel Level - E, 1/4, 1/2, 3/4, FVoltmeter - 9-17 VDCLighting - Back lit technology is popular with performance instrumentation due to precise lighting allowing you see what is truly important when you really need it at a quick glance. Each number, tick mark, annunciator, needle, indicator and digital message center is lit by a series of LEDs behind the gauge face.Digital Message CenterStandard Displays:Odometer (One time user settable, Million Mile)Dual (A/B) Trip Meter (0-9,999.9)Clock (12 hour)Performance Meters: 0-60 MPH Timer (0-100 kmh)1/4 mile time1/4 mile end speed (trap speed)High speed recallHigh RPM recallGauges: Speedometer (0-255 MPH / KM/H)Tachometer (0-9,990 RPM)Oil Pressure (0-100 psi displayed in 1 psi increments)Water Temperature (100-300ºF / 40-150ºC displayed in 1ºF/ºC increments)Voltmeter (9-17 VDC)Fuel Level (0-99% full)Lighting:Auto-contrasting LCD display for optimal view in the brightest of sunlight.LED backlit at night to match/complete the look at night.Built-In IndicatorsTurn Signals (Left/ Right)High BeamCheck EngineParking BrakeCruise Control (On/ On & Engaged when vehicle is equipped)Gear Position (Optional GSS-3000 sensor required, sold separately)4 x 4 (When vehicle is equipped)Wait to Start (When vehicle is equipped)Included Sensors:Water Temperature - 1/8" NPT, ground isolated sensor with a 10 ft harness.Oil Pressure - 1/8" NPT solid state sensor with a 10 ft harness.Cable Drive Speed Sensor/Generator - Replaces GM style speedometer cables with a 10 ft harness (Tremec and Ford style adapters available upon request).Bushings - Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads.CalibrationPushbutton - Dakota Digital instruments are programmed and operated by the push of a button. Simply mount the included pushbuttons supplied with your gauges in a convenient and easily accessible location. These buttons are used to calibrate your speedometer, set the cylinder count and the fuel level gauge. Once properly configured these same buttons are used to access the wealth of information located in the Digital Message Centers.

Dakota Digital 1977-1988 Oldsmobile Cutlass Customizable Digital / Analog Dash Gauge Kit - Silver AlloyHDX-77O-CUT-S  Included Analog Gauges: Speedometer, Tachometer, Oil Pressure, Water Temp, Voltmeter, and Fuel Level.  Silver alloy gauge-face styling, each HDX system allows the user to select their favorite illumination color for the gauge readings and needles, as well as the TFT message center displays.  Various Indicators can be displayed in the Digital Message Centers: Turn Signals, High Beam, Check Engine, Parking Brake, Cruise Control, Odometer, Clock, Trip Meter...  Necessary sensors included for oil pressure (1/8” NPT), Water Temp (1/8" with bushings for 1/4", 3/8", 1/2” NPT as well 12mm and 16mm for GM & LS applications) and speedometer pulse generator.*Bezel not included, shown for visual/presentation purposes. System uses OEM or reproduction style bezel.No matter if you have the rectangle or round-gauge style cluster in your 1978-87 Cutlass, this direct fit system is the ultimate upgrade! The full color TFT message center can be customized for specific data, while the six analog gauge readings give you information at a glance. Requires use of stock cluster and bezel. Available with your choice of black or silver alloy gauge-face styling, each HDX system allows the user to select independent illumination colors for the gauge readings and needles, as well as the message centers. Calibration and personal settings are manipulated with the built-in, capacitive-touch buttons, or the available Bluetooth app for Apple and Android devices. Each needle hub is black nickel plated spun-aluminum to match the buttons. All HDX instrument systems feature dead-faced indicators (turn signals, high beam, check engine, cruise control, parking brake, plus two user-definable), and a red, settable warning light for each gauge.  With our central control box, installation is greatly simplified with vehicle-harness sourced signals and supplied, solid state sending units connecting cleanly to their respective terminal. Click the tabs below for a more in-depth look at the HDX series! HDX System Includes:Analog GaugesSpeedometer - 0-160 MPH (optional metric version 0-260 kmh). Split scale provides resolution of a 120MPH speedometer, with a top end range of 160MPH.Tachometer - 0-8000 RPMOil Pressure - 0-80 psiWater Temperature - 100-260ºF (optional metric version 40-120ºC)Fuel Level - E, 1/4, 1/2, 3/4, FVoltmeter - 9-17 VDCDigital Message CentersStandard Displays:Odometer (One time user settable, Million Mile)Dual (A/B) Trip Meter (0-9,999.9)Clock (12 hour)Estimated Range/Miles to EmptyPerformance Meters: 0-60 MPH Timer (0-100 kmh)1/4  and 1/8 mile time1/4 and 1/8 mile end speed (trap speed)High speed recallHigh RPM recallGauges: Speedometer (0-255 MPH / KM/H)Tachometer (0-9,990 RPM)Oil Pressure (0-100 psi displayed in 1 psi increments)Water Temperature (100-300ºF / 40-150ºC displayed in 1ºF/ºC increments)Voltmeter (9-17 VDC)Fuel Level (0-99% full)Built-In Indicators: Turn Signals (Left/ Right)High BeamCheck EngineParking BrakeCruise Control (On/ On & Engaged when vehicle is equipped)Gear Position (Optional GSS-2000 sensor required, sold separately)4 x 4 (When vehicle is equipped)Wait to Start (When vehicle is equipped)Two Auxiliary input indicators with user-programmable labelsEach analog gauge sweep contains a red LED indicator for quick notice of a warning condition (except speedometer)Lighting:ColorsOver 30 user-selectable color options allow you to independently change the needle color, sweep color and digital TFT display color.BrightnessBoth daytime and nighttime brightness can be easily controlled through the HDX setup menu, allowing you to choose your preferred lighting intensity level, toggled by the activation of the headlight switch. If on-the-fly rotary type control is desired, the DIM-1 (sold separately) is a common accessory to add this functionality.ThemesWith 12 factory preset color themes, you can quickly create a beautiful looking system. Or, for the ultimate in customization, choose all of the color zones yourself.TechnologyFull LED backlighting provides a strikingly visual gauge package, with sharp contrast for ease of viewing both night and day. Full RBG backlighting allows you to create the specific color you want, with a unique daytime and nighttime theme if desired. Whether your goal is an OE look or something truly bold, the HDX Series lets you make the choice.Included Sensors:Water Temperature - 1/8" NPT, ground isolated sensor with a 10 ft harness.Oil Pressure - 1/8" NPT solid state sensor with a 10 ft harness.Cable Drive Speed Sensor/Generator - Replaces GM style speedometer cables with a 10 ft harness. Tremec and Ford style adapters available upon request.Bushings - Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads.Calibration and UsePushbutton ControlAll HDX Series Instrument Systems included LED-lit onboard capacitive touch pushbuttons through the gauge face. These pushbuttons provide quick and consistent access to all functions, either in driving mode or while in the setup menu. Button-press feedback is available through the TFT Message Center, or through the included buzzer. Additionally, remote mounted switches can be wired into the HDX system if this proves more accessible based upon seating position. The HDX series can also be completely configured through the Bluetooth app, suitable to Android and Apple devices. Download the free app to your tablet or smart phone, sync your device to the HDX system, and enjoy quick and convenient menu navigation and real time gauge readouts for diagnostic use or a secondary display. CalibrationAll calibration settings are handled through onboard capacitive touch switches or the remote Bluetooth app. While many calibration settings exist, the speedometer and fuel level are completed in most cases (unless GPS-50-2 is used, negating the need to calibrate the speedometer - GPS-50-2 is available for purchase separately) through a few taps of the pushbuttons and a short test drive of the vehicle.