(855) 962-8263

Gauge Sets

Products: 1–12 of 2290
Show: 12
Sort by: Price Low - High
Products: 1–12 of 2290
Show: 12
New arrivals
Bestsellers
  • Amber Flush Mount Rear Tail Brake Light Lens Assembly Set of 4 for 59 Cadillac
    Amber Flush Mount Rear Tail Brake Light Lens Assembly Set of 4 for 59 Cadillac
    Octane LightingSET OF 4 - Amber Flush Mount Tail Light Lens Assembly for 59 CadillacSET OF 4 New Amber Tail Light Lens Assembles12v 1157 Bulbs IncludedAmber Polycarbonate LensesSimple 3-Wire HookupTail Lamp / Brake FunctionsFully Sealed ElectronicsEasy Surface Mounting w/ 2 StudsMounting Hardware & Gaskets IncludedFits 1959 Cadillac CarsQty: 4 (Four) AssembliesWe Also Have These Assemblies Available Individually in Our Store
    • $139.95
    1 left in stock.
  • Amber Flush Mount Rear Tail Brake Light Lens Assembly Set of 4 for 59 Cadillac
    Amber Flush Mount Rear Tail Brake Light Lens Assembly Set of 4 for 59 Cadillac
    Octane LightingSET OF 4 - Amber Flush Mount Tail Light Lens Assembly for 59 CadillacSET OF 4 New Amber Tail Light Lens Assembles12v 1157 Bulbs IncludedAmber Polycarbonate LensesSimple 3-Wire HookupTail Lamp / Brake FunctionsFully Sealed ElectronicsEasy Surface Mounting w/ 2 StudsMounting Hardware & Gaskets IncludedFits 1959 Cadillac CarsQty: 4 (Four) AssembliesWe Also Have These Assemblies Available Individually in Our Store
    • $139.95
    1 left in stock.
  • 5-3/4" Motorcycle Stock 6v LED Headlamp w/ Chrome Moto Bucket Bottom Mount EACH
    5-3/4" Motorcycle Stock 6v LED Headlamp w/ Chrome Moto Bucket Bottom Mount EACH
    ONE - NEW - MOTORCYCLE 5-3/4" INCH ROUND STOCK GLASS HEADLAMP & CHROME METAL HOUSING INCLUDES (1) HIGH INTENSITY 6v 3RD GENERATION LED H4 INTENSE WHITE LIGHT BULB! - Fits Harley Davidson Motorcycle with 5.75" Headlight Buckets - One New 6-Volt LED Headlight w/ Moto Bucket SAE/DOT Approved - Street LegalDurable Chrome Bucket w/ Wiring & PlugBottom Stud Mounted BucketChrome Finish2600 Lumen Low Beam / 4000 Lumen High BeamDaylight White Brightness360° Light Beam AngleBrighter and Whiter than Stock Headlights High & Low Beam Function LED Bulb Works with Factory Wiring Original 3 Prong Plug Design (Plug & Play) High Quality Stock Style Glass Faced & Metal Backed Semi-Sealed Beam - Removable / Replaceable Light Bulbs Direct Replacement for Stock Headlights Fits Motorcycles with 5-3/4" Round Headlight Housing This listing is for one new 5.75" round 6 volt high/low beam stock style H4 conversion 3rd Generation LED motorcycle headlight with a chrome headlight bucket. Includes one 3rd Gen LED Xenon 6500k super white LED bulb. This is a glass faced headlight. These are very good quality and very bright! These headlights have a domed clear glass face unlike all all the others on the market that have a flat plastic face. These light up much brighter and whiter than the standard stock style incandescent headlight bulbs. These have the original 3 prong plug design on the back so they will plug right into the original wiring harness (no wiring modification needed). These will fit motorcycles that have 5.75 inch in diameter headlight buckets with stud mounts. Bucket is metal with a chrome finish and a bottom stud mount.  We will take extra care in packaging. Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,600 / 4,000 Lumen Bulbs 2,600 / 4,000 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,600 Lumens of light and draws 26 watts of energy on the low beam setting; but produces 4,000 Lumens of light and draws 40 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,600 Lumens Low Beam / 4,00 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle26 Watts Low Beam / 40 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for CoolingNewest Technology All-In-One Design: No Ballast or Driver RequiredLED Protection Circuit to Protect from Reverse Polarity, Low Voltage or High Voltage SpikesSmart & Efficient Cooling System Uses Built-In Cooling FanGreater Visibility - 3x Brighter than Factory Halogen BulbsHigh Luminous Efficacy Flux: 2,600/4,000lmHigh Quality Aluminum Heat Sink Ensures Proper Temperature RegulationLower Power Consumption than Halogen BulbsVibration Proof Design30,000 Hour LifespanEasy Plug & Play Installation - No Modification RequiredNo Splicing of Harnesses Required for LED BulbsUses 75% LESS Power than Halogen or HID Bulbs3x Brighter than Stock Halogen BulbsOBC Error Free OperationDramatically Improves Visibility at Night SAE & DOT APPROVED
    • $79.95
    2 left in stock.
  • 5-3/4" Motorcycle Stock 6v LED Headlamp w/ Chrome Moto Bucket Bottom Mount EACH
    5-3/4" Motorcycle Stock 6v LED Headlamp w/ Chrome Moto Bucket Bottom Mount EACH
    ONE - NEW - MOTORCYCLE 5-3/4" INCH ROUND STOCK GLASS HEADLAMP & CHROME METAL HOUSING INCLUDES (1) HIGH INTENSITY 6v 3RD GENERATION LED H4 INTENSE WHITE LIGHT BULB! - Fits Harley Davidson Motorcycle with 5.75" Headlight Buckets - One New 6-Volt LED Headlight w/ Moto Bucket SAE/DOT Approved - Street LegalDurable Chrome Bucket w/ Wiring & PlugBottom Stud Mounted BucketChrome Finish2600 Lumen Low Beam / 4000 Lumen High BeamDaylight White Brightness360° Light Beam AngleBrighter and Whiter than Stock Headlights High & Low Beam Function LED Bulb Works with Factory Wiring Original 3 Prong Plug Design (Plug & Play) High Quality Stock Style Glass Faced & Metal Backed Semi-Sealed Beam - Removable / Replaceable Light Bulbs Direct Replacement for Stock Headlights Fits Motorcycles with 5-3/4" Round Headlight Housing This listing is for one new 5.75" round 6 volt high/low beam stock style H4 conversion 3rd Generation LED motorcycle headlight with a chrome headlight bucket. Includes one 3rd Gen LED Xenon 6500k super white LED bulb. This is a glass faced headlight. These are very good quality and very bright! These headlights have a domed clear glass face unlike all all the others on the market that have a flat plastic face. These light up much brighter and whiter than the standard stock style incandescent headlight bulbs. These have the original 3 prong plug design on the back so they will plug right into the original wiring harness (no wiring modification needed). These will fit motorcycles that have 5.75 inch in diameter headlight buckets with stud mounts. Bucket is metal with a chrome finish and a bottom stud mount.  We will take extra care in packaging. Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,600 / 4,000 Lumen Bulbs 2,600 / 4,000 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,600 Lumens of light and draws 26 watts of energy on the low beam setting; but produces 4,000 Lumens of light and draws 40 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,600 Lumens Low Beam / 4,00 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle26 Watts Low Beam / 40 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for CoolingNewest Technology All-In-One Design: No Ballast or Driver RequiredLED Protection Circuit to Protect from Reverse Polarity, Low Voltage or High Voltage SpikesSmart & Efficient Cooling System Uses Built-In Cooling FanGreater Visibility - 3x Brighter than Factory Halogen BulbsHigh Luminous Efficacy Flux: 2,600/4,000lmHigh Quality Aluminum Heat Sink Ensures Proper Temperature RegulationLower Power Consumption than Halogen BulbsVibration Proof Design30,000 Hour LifespanEasy Plug & Play Installation - No Modification RequiredNo Splicing of Harnesses Required for LED BulbsUses 75% LESS Power than Halogen or HID Bulbs3x Brighter than Stock Halogen BulbsOBC Error Free OperationDramatically Improves Visibility at Night SAE & DOT APPROVED
    • $79.95
    2 left in stock.
  • Dakota Digital RTX Dash Gauge Kit Black for 1961-62 Chevy Impala RTX-61C-IMP-X
    Dakota Digital RTX Dash Gauge Kit Black for 1961-62 Chevy Impala RTX-61C-IMP-X
    Dakota Digital1961-1962 Chevrolet Impala Customizable Digital / Analog Dash Gauge Kit - Black AlloyOver 30 User-Selectable Color Options for Dash Needle & SweepRTX-61C-IMP-XEmbrace the shapes in your 1961-62 Chevy dashboard and drop this multi-function, multi-color beauty in place! New aluminum chrome bezels are supplied for the round gauges, while your stock stamped trim for the speedometer is reused. From three-wheeling down Whittier Blvd. to power shifting a 409/425, the stock look will make you smile every time you hit the key! The RTX series is the latest from Dakota Digital, focused on retaining that stock look without sacrificing the late-model features you love. Every effort has been put forth to incorporate OEM design elements regarding the layout, face styling and indicators. A casual glance may dismiss these as original equipment, but once you hit the switch and the LED backlighting comes on in your favorite color scheme, all doubts will be removed. Starting from scratch, CNC machined housings are filled with electronics designed and built in-house, helping Dakota Digital once again raise the bar for aftermarket instrumentation. The high-definition TFT message centers can be fully configured to display just about any piece of information needed. As you’ve come to expect from Dakota Digital, the RTX series utilizes a central control box to make installation and setup as easy as possible. Click the tabs below for a more in-depth look at the RTX series!*Uses factory bezel/ trim/ fascia (not included.for demonstration purposes only).Analog GaugesSpeedometer ·0 -120 MPH (optional metric version 0- 240 kmh)Tachometer ·0- 8,000 RPMOil Pressure ·0- 80 psiWater Temperature ·100- 260ºF (optional metric version 40- 120ºC)Fuel Level ·E, 1/4, 1/2, 3/4, FVoltmeter ·9- 17 VDCDigital Message CentersStandard Displays ·Odometer (One time user settable, Million Mile) ·Dual (A/B) Trip Meter (0- 9,999.9) ·Clock (12 hour) ·Estimated Range/ Miles to EmptyPerformance Meters ·0- 60 MPH Timer (0- 100 kmh) ·1/4 and 1/8 mile time ·1/4 and 1/8 mile end speed (trap speed) ·High speed recall ·High RPM recallBuilt-in IndicatorsIndicators ·Turn Signals (Left/ Right) ·High Beam ·Check Engine ·Parking Brake ·Cruise Control (On/ On & Engaged when vehicle is equipped) ·Gear Position (Optional GSS-3000 sensor required) ·4 x 4 (When vehicle is equipped) ·Wait to Start (When vehicle is equipped) ·Two Auxiliary input indicators with user-programmable labels ·Each analog gauge sweep contains a red LED indicator for quick notice of a warning condition (except speedometer) **Not all OEM indicator lamp functions will be replaced.    If additional indicators are desired within the new instrument system, consider repurposing any unused indicators to suit your application.Lighting TechnologyColors ·Over 30 user-selectable color options allow you to independently change the needle color, sweep color and digital TFT display color.Brightness ·Both daytime and nighttime brightness can be easily controlled through the HDX setup menu, allowing you to choose your preferred lighting intensity level, toggled by the activation of the headlight switch. If on-the-fly rotary type control is desired, the DIM-1 is a common accessory to add this functionality.Themes ·With 12 factory preset color themes, you can quickly create a beautiful looking system. Or, for the ultimate in customization, choose all of the color zones yourself.Technology ·Full LED backlighting provides a strikingly visual gauge package, with sharp contrast for ease of viewing both night and day. Full RBG backlighting allows you to create the specific color you want, with a unique daytime and nighttime theme if desired. Whether your goal is an OE look or something truly bold, the HDX Series lets you make that choice.Included SensorsWater Temperature ·1/8" NPT, ground isolated sensor with a 10 ft harness.Oil Pressure ·1/8" NPT solid state sensor with a 10 ft harness.Cable Driven Speed Sensor/ Generator ·Replaces GM style speedometer cables with a 10 ft harness. Sensor requires approximately 5" clearance extending between the cable drive output and any obstruction. Part # 130011 (sold separately) allows for relocation of the pulse generator when additional clearance is required. (Tremec and Ford style adaptors available on request.)Bushings ·Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads.Control Box Dimensions5.5" x 3.5"x 1"Calibration and UsePushbutton Control ·Dakota Digital instrument systems are programmed and operated by the push of a button. A two-sided rocker switch is included with each package; mount this switch in an easily accessible location when in the driving position. The rocker switch provide quick and consistent access to all functions, either in driving mode or while in the setup menu. Button-press feedback is available through the TFT Message Center, or through the included buzzer. Once configured, this same switch is used to access the wealth of information located in the digital message centers.Mobile App ·RTX instrument systems can also be completely configured through the available mobile app, suitable to Android and Apple devices. Using your existing tablet or smart phone, download the free app, sync your device to the RTX system, and enjoy quick and convenient menu navigation and real time gauge readouts for diagnostic use or a secondary display.Calibration ·All calibration settings are handled through the included pushbutton switch or the remote Bluetooth app. While many calibration settings exist, the speedometer and fuel level are completed in most cases (unless GPS-50-2 is used, negating the need to calibrate the speedometer) through a few taps of the pushbuttons and a short test drive of the vehicle.
    • $1645.00
    Backorder available
    • Free shipping
  • Dakota Digital 1977-90 Chevy Caprice Impala Analog Gauge Kit Black HDX-77C-CAP-K
    Dakota Digital 1977-90 Chevy Caprice Impala Analog Gauge Kit Black HDX-77C-CAP-K
    Get your box Chevy lookin’ right with this bolt-in system! No cutting is required to have color-changing backlighting, full-color digital screens and mobile-app compatibility, but there will be a bit of wiring to complete the conversion. Installation and setup are easy whether you have a stock drivetrain or LS-conversion; we have you covered! Kit fits 1977-90 Chevy B-bodies and 1984-86 Pontiac Parisienne (bezel is NOT included). *Bezel is NOT included, shown for visual/presentation purposes only.System uses OEM or reproduction style bezel. Each HDX system allows the user to select their favorite illumination color for the gauge readings and needles, as well as the TFT message center displays. RGB LEDs are incorporated into the circuit boards for fully-adjustable display colors, allowing the user to personalize their instrument system to match nearly any vehicle theme. Calibration and personal settings are manipulated with the built-in, capacitive-touch buttons, or the Bluetooth app for Apple and Android devices. Each needle hub is black nickel plated spun-aluminum to match the buttons. All HDX instrument systems feature dead-faced indicators (turn signals, high beam, check engine, cruise control, parking brake, plus two user-definable), and a red, settable warning light for each gauge.  With the central control box, installation is greatly simplified with vehicle-harness sourced signals and supplied, solid state sending units connecting cleanly to their respective terminal. Scroll through the listing below for a more in-depth look at the HDX series! The HDX series from Dakota Digital is the latest in aftermarket automotive instrumentation technology. HDX takes personalization and usability to a whole new dimension while retaining your favorite features from the wildly popular VHX-series such as LED backlighting for the numbers, tick marks and dead-faced dash indicators (turn signals, high beam, check engine, cruise control engaged and parking brake). Illuminated needles and a lifetime warranty are still part of the deal as well.  These features add up to a clean, easy to read instrument system in all conditions. Precision stepper motors provide accurate needle movement along with a full-sweep at key-on, and the needle hubs are black nickel plated spun-aluminum. With the instrument system dialed in, including calibration of the speedometer and fuel gauge, the system can calculate your remaining fuel range, expressed in miles to empty.   Every kit is supplied with an optional buzzer for feedback each time a button is pressed. Further, the buzzer can emit a warning tone for each reading at a user-defined set point to coincide with the dead-faced, red warning lights incorporated into the gauge faces. Vehicle integration through a central control box has become a calling card for Dakota Digital, and the advantages are substantial. Most notably, installation is greatly simplified; two power (constant and switched) and one ground connection get things up and running, while vehicle-harness sourced signals and sensor inputs run cleanly to their respective terminal. Supplied, solid state sending units with weather-tight harnesses ensure trouble-free operation. The control box allows for easier service, a nicer-looking finished product, in addition to an abundance of technology packed into a vintage dashboard.   HDX System Includes: Analog Gauges Speedometer - 0-160 MPH (optional metric version 0-260 kmh). Split scale provides resolution of a 120MPH speedometer, with a top end range of 160MPH.Tachometer - 0-8000 RPMOil Pressure - 0-80 psiWater Temperature - 100-260ºF (optional metric version 40-120ºC)Fuel Level - E, 1/4, 1/2, 3/4, FVoltmeter - 9-17 VDC   Digital Message Centers Standard Displays: Odometer (One time user settable, Million Mile)Dual (A/B) Trip Meter (0-9,999.9)Clock (12 hour)Estimated Range/Miles to Empty Performance Meters:  0-60 MPH Timer (0-100 kmh)1/4  and 1/8 mile time1/4 and 1/8 mile end speed (trap speed)High speed recallHigh RPM recall Gauges:  Speedometer (0-255 MPH / KM/H)Tachometer (0-9,990 RPM)Oil Pressure (0-100 psi displayed in 1 psi increments)Water Temperature (100-300ºF / 40-150ºC displayed in 1ºF/ºC increments)Voltmeter (9-17 VDC)Fuel Level (0-99% full) Built-In Indicators: Turn Signals (Left/ Right)High BeamCheck EngineParking BrakeCruise Control (On/ On & Engaged when vehicle is equipped)Gear Position (Optional GSS-3000 sensor required, sold separately)4 x 4 (When vehicle is equipped)Wait to Start (When vehicle is equipped)Two Auxiliary input indicators with user-programmable labelsEach analog gauge sweep contains a red LED indicator for quick notice of a warning condition (except speedometer) Lighting:Colors Over 30 user-selectable color options allow you to independently change the needle color, sweep color and digital TFT display color. Brightness Both daytime and nighttime brightness can be easily controlled through the HDX setup menu, allowing you to choose your preferred lighting intensity level, toggled by the activation of the headlight switch. If on-the-fly rotary type control is desired, the DIM-1 (sold separately) is a common accessory to add this functionality. Themes With 12 factory preset color themes, you can quickly create a beautiful looking system. Or, for the ultimate in customization, choose all of the color zones yourself. Technology Full LED backlighting provides a strikingly visual gauge package, with sharp contrast for ease of viewing both night and day. Full RBG backlighting allows you to create the specific color you want, with a unique daytime and nighttime theme if desired. Whether your goal is an OE look or something truly bold, the HDX Series lets you make the choice. Included Sensors:     Water Temperature - 1/8" NPT, ground isolated sensor with a 10 ft harness. Oil Pressure - 1/8" NPT solid state sensor with a 10 ft harness. Cable Drive Speed Sensor/Generator - Replaces GM style speedometer cables with a 10 ft harness. Sensor requires approximately 5" clearance extending between the cable drive output and any obstruction. Part # 130011 (sold separately) allows for relocation of the pulse generator when additional clearance is required. (Tremec and Ford style adaptors available on request.) Bushings - Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads. Calibration and Use Pushbutton Control All HDX Series Instrument Systems included LED-lit onboard capacitive touch pushbuttons through the gauge face. These pushbuttons provide quick and consistent access to all functions, either in driving mode or while in the setup menu. Button-press feedback is available through the TFT Message Center, or through the included buzzer. Additionally, remote mounted switches can be wired into the HDX system if this proves more accessible based upon seating position. The HDX series can also be completely configured through the Bluetooth app, suitable to Android and Apple devices. Download the free app to your tablet or smart phone, sync your device to the HDX system, and enjoy quick and convenient menu navigation and real time gauge readouts for diagnostic use or a secondary display. Calibration All calibration settings are handled through onboard capacitive touch switches or the remote Bluetooth app. While many calibration settings exist, the speedometer and fuel level are completed in most cases (unless GPS-50-2 is used, negating the need to calibrate the speedometer - GPS-50-2 is available for purchase separately) through a few taps of the pushbuttons and a short test drive of the vehicle.
    • $1545.00
    2 left in stock. Backorder available
    • Free shipping
  • 1954 Chevy Truck VHX System, Silver Alloy Style Face, Red Display - Not Shown
    1954 Chevy Truck VHX System, Silver Alloy Style Face, Red Display - Not Shown
    1954 Chevy Truck VHX System, Silver Alloy Style Face, Red Display - Not Shown
    • $850.25
    • Free shipping
    • 5% less
  • Dakota Digital White Gauge Black Dash for 1957-60 Ford Truck VHX-57F-PU-K-W
    Dakota Digital White Gauge Black Dash for 1957-60 Ford Truck VHX-57F-PU-K-W
    Dakota Digital VHX Instruments Fits: 1957-1960 Ford Truck / 1961-1967 Econoline Van VHX-57F-PU-K-W with BLACK ALLOY Style & White Backlighting 1957 brought us the first fleetside Ford pickup, along with a new dash. The small instrument cluster is just begging for an upgrade, and this direct-fit package is just the ticket! Use your stock 1957- 60 steel front bezel to install this six-gauge-system, complete with sending units in your choice of Black or Silver Alloy face styling. Drivetrain upgrades are not an issue; it’s compatible with everything from a Y-Block to a 4.6 modular motor! Fully lit needles, backlit faces, and two highly visible LCD message centers are a few of the things that you can see which set the VHX Series apart from yesterday’s traditional approach to instrumentation. A few of the features which you don’t normally see are the micro-controlled precision stepper motors, solid state sensors for unparalleled accuracy, and user-customizable display feedback, all supported by an unrivaled limited lifetime warranty which has become the standard for Dakota Digital instrumentation systems . Completely engineered and manufactured at our facility in Sioux Falls, South Dakota, the VHX Series has completely revolutionized the instrumentation industry! *Bezel not included, shown for visual/presentation purposes. System uses OEM or reproduction style bezel VHX System Includes: Analog Gauges Speedometer - 0-160 MPH (optional metric version 0-255 kmh) Tachometer - 0-8000 RPM Oil Pressure - 0-80 psi Water Temperature - 100-260ºF (optional metric version 40-120ºC) Fuel Level - E, 1/4, 1/2, 3/4, F Voltmeter - 9-17 VDC Lighting - Back lit technology is popular with performance instrumentation due to precise lighting allowing you see what is truly important when you really need it at a quick glance. Each number, tick mark, annunciator, needle, indicator and digital message center is lit by a series of LEDs behind the gauge face. Digital Message Center Standard Displays: Odometer (One time user settable, Million Mile) Dual (A/B) Trip Meter (0-9,999.9) Clock (12 hour) Performance Meters:  0-60 MPH Timer (0-100 kmh) 1/4 mile time 1/4 mile end speed (trap speed) High speed recall High RPM recall Gauges:  Speedometer (0-255 MPH / KM/H) Tachometer (0-9,990 RPM) Oil Pressure (0-100 psi displayed in 1 psi increments) Water Temperature (100-300ºF / 40-150ºC displayed in 1ºF/ºC increments) Voltmeter (9-17 VDC) Fuel Level (0-99% full) Lighting: Auto-contrasting LCD display for optimal view in the brightest of sunlight. LED backlit at night to match/complete the look at night. Built-In Indicators Turn Signals (Left/ Right) High Beam Check Engine Parking Brake Cruise Control (On/ On & Engaged when vehicle is equipped) Gear Position (Optional GSS-2000 sensor required, sold separately) 4 x 4 (When vehicle is equipped) Wait to Start (When vehicle is equipped) Included Sensors: Water Temperature - 1/8" NPT, ground isolated sensor with a 10 ft harness. Oil Pressure - 1/8" NPT solid state sensor with a 10 ft harness. Cable Drive Speed Sensor/Generator - Replaces GM style speedometer cables with a 10 ft harness (Tremec and Ford style adapters available upon request). Bushings - Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads. Calibration Pushbutton - Dakota Digital instruments are programmed and operated by the push of a button. Simply mount the included push buttons supplied with your gauges in a convenient and easily accessible location. These buttons are used to calibrate your speedometer, set the cylinder count and the fuel level gauge. Once properly configured these same buttons are used to access the wealth of information located in the Digital Message Centers. More info about this system and pics are available below. This listing is for ONE VHX gauge system with your choice of style and backlighting color. Please let us know your options when you make your purchase. Metric system (KM/H and degrees Celsius) is available as a custom option (no additional cost) but may take 4-8 weeks to build.
    • $925.00
    Backorder available
    • Free shipping

Browse by Vehicle