Gauge Sets

Products: 2536 of 2288
You are on page 3, click to load from start
  • V8 Speedster Series Six Gauge Set | Dash / Steering
    V8 Speedster Series Five Gauge Set3 3/8" Speed/Tach, Four 2 1/8" Gauges (Fuel 240-33OHM)Fits CHEVY, FORD, GM, UNIVERSAL, PRE-1970
    • $1382.00
  • Fuel Gauge Interface Module | Dash / Steering
    Low Fuel Light Trigger at 1/8 Tank (Works with a LED or Incandescent Bulb)Universal Fit
    • $239.98
  • Dakota Digital 88-91 Chevy GMC Truck Gauge Dual Color Blue/Teal VFD3-88C-PU-U-Z
    Dakota Digital 1988-1989-1990-1991 Chevy & GMC Pickup Truck Digital Instrument System Fits: 88-89-90-91 Chevrolet / GMC Pickup TrucksVFD3-88C-PU-U-Z with Dual Color Display (Blue & Teal)Dakota Digital Series III instrument systems offer the latest technologies and features for your custom vehicle. High brightness vacuum fluorescent displays provide a lifetime of trouble free use while offering increased accuracy and features!Fits Directly into Stock Bezel!Full 6 Gauge Instrument System!Dual Color Display (Blue & Teal Options) *Bezel not included, shown for visual/presentation purposes* System uses OEM or reproduction style bezelDigital Gauges Speedometer ·0 -255 MPH (optional metric version 0- 255 km/h) Tachometer ·0- 17,500 RPM Oil Pressure ·0- 99 psi Water Temperature ·0- 300ºF (optional metric version 0- 150ºC) Fuel Level ·0- 99% Voltmeter ·8- 17 VDC Standard Colors ·Blue or Teal Digital Message Centers Standard Displays ·Odometer (One time user settable, Million Mile) ·Dual (A/B) Trip Meter (0- 9,999.9) Performance Meters ·0- 60 MPH Timer (0- 100 kmh) ·1/4 mile time ·1/4 mile end speed (trap speed) ·High speed recall ·High RPM recall Gauges ·Speedometer (0- 255 MPH/kmh) opposite scale of main speedometer. Built-in Indicators Indicators ·Turn Signals (Left/ Right) ·High Beam ·Check Engine ·Parking Brake ·Cruise Control (On/ On & Engaged when vehicle is equipped) ·Gear Position (Optional GSS-2000 sensor required) ·4 x 4 (When vehicle is equipped) ·Wait to Start (When vehicle is equipped)  **Not all OEM indicator lamp functions will be replaced. If additional indicators are desired within the new instrument system, consider repurposing any unused indicators to suit your applicationWater Temperature 1/8" NPT, ground isolated sensor with a 10 ft harness. Oil Pressure 1/8" NPT solid state sensor with a 10 ft harness. Cable Driven Speed Sensor/ Generator Replaces GM style speedometer cables with a 10 ft harness. Sensor requires approximately 5" clearance extending between the cable drive output and any obstruction. Part # 130011 (sold separately) allows for relocation of the pulse generator when additional clearance is required. (Tremec and Ford style adaptors available on request.) Bushings Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads. Calibration Pushbutton Dakota Digital instruments are programmed and operated by the push of a button. Simply mount the included pushbuttons supplied with your gauges in a convenient and easily accessible location. These buttons are used to calibrate your speedometer, set the cylinder count and the fuel level gauge. Once properly configured these same buttons are used to access the wealth of information located in the Digital Message Centers.Mounting, Wiring and Setup ManualQuick Start Guide .logo-container { display: flex; -ms-flex-direction: row; -webkit-flex-direction: row; flex-direction: row; -ms-flex-pack: center; justify-content: center; -webkit-align-content: center; -ms-flex-line-pack: center; -ms-align-content: center; align-content: center; } .sc-logo { width: 145px; height: 36px; display: block; background-size: 145px 36px; background-image: url('https://www.channelsmanager.com/downloads/images/sc_logo.svg'); background-repeat: no-repeat; background-position: 0 0; } /*x-small*/ @media (max-width: 599px) { .sc-logo { width: 60px; height: 14.547px; background-size: 60px 14.547px; } } /* small */ @media (min-width: 600px) and (max-width: 959px) { .sc-logo { width: 100px; height: 24.244px; background-size: 100px 24.244px; } } /* medium */ @media (min-width: 960px) and (max-width: 1279px) { .sc-logo { width: 145px; height: 36px; background-size: 145px 36px; } } /* large */ @media (min-width: 1280px) { .sc-logo { width: 200px; height: 48.489px; background-size: 200px 48.489px; } } .sc-text { font-family: calibri; font-size: medium; text-align: center; } /*x-small*/ @media (max-width: 599px) { .sc-text { font-family: calibri; font-size: xx-small; } } /* small */ @media (min-width: 600px) and (max-width: 959px) { .sc-text { font-family: calibri; font-size: small; } } /* medium */ @media (min-width: 960px) and (max-width: 1279px) { .sc-text { font-family: calibri; font-size: medium; } } /*large */ @media (min-width: 1280px) { .sc-text { font-family: calibri; font-size: large; } } Powered by Solid Commerce The All-in-One Listing, Inventory & Order Management Solution for Online Merchants
    • $717.25
    1 left in stock. Backorder available
    • Free shipping
    • 5% less
  • 55-59 Chevy truck VFD gauge system w/Blue and Teal Lenses
    55-59 Chevy truck VFD gauge system w/Blue and Teal Lenses
    • $641.25
    • Free shipping
    • 5% less
  • Dakota Digital 67-72 Chevy Pickup Truck Analog Gauges Black Blue VHX-67C-PU-K-B
    Dakota Digital   1967-72 Chevy Pickup Truck VHX Instruments   Fits: 1967 1968 1969 1970 1971 1972 Chevrolet Pick-Up TruckVHX-67C-PU-K-B with BLACK ALLOY style and BLUE backlighting   For many enthusiasts, the 67-72 Chevy Truck set a new standard in styling. What better way of modernizing this iconic truck than an update like the VHX-67C-PU? 1967 marked the beginning of the muscle truck era, and GM equipped both Chevy and GMC pickups with sports car-inspired gauge clusters. Exploiting the seven-hole instrument bezel's space, Dakota Digital fills it up with six analog instruments and three LCD message centers. Integrated pushbuttons above the column simplify installation, as does direct-fit compatibility using an OEM or reproduction bezel (bezel is not included). Fully lit needles, backlit faces, and highly visible LCD message centers are a few of the things that you can see which set the VHX Series apart from yesterday’s traditional approach to instrumentation. A few of the features which you don’t normally see are the micro-controlled precision stepper motors, solid state sensors for unparalleled accuracy, and user-customizable display feedback, all supported by an unrivaled limited lifetime warranty which has become the standard for Dakota Digital instrumentation systems. Completely engineered and manufactured at their facility in Sioux Falls, South Dakota, the VHX Series has completely revolutionized the instrumentation industry! *The VHX-67C-PU fits into a stock or reproduction front dash bezel, ICM-67C-PU sold separately. VHX System Includes: Analog Gauges Speedometer - 0-160 MPH (optional metric version 0-255 kmh) Tachometer - 0-8000 RPM Oil Pressure - 0-80 psi Water Temperature - 100-260ºF (optional metric version 40-120ºC) Fuel Level - E, 1/4, 1/2, 3/4, F Voltmeter - 9-17 VDC Lighting - Back lit technology is popular with performance instrumentation due to precise lighting allowing you see what is truly important when you really need it at a quick glance. Each number, tick mark, annunciator, needle, indicator and digital message center is lit by a series of LEDs behind the gauge face. Digital Message Center Standard Displays: Odometer (One time user settable, Million Mile) Dual (A/B) Trip Meter (0-9,999.9) Clock (12 hour)   Performance Meters:  0-60 MPH Timer (0-100 kmh) 1/4 mile time 1/4 mile end speed (trap speed) High speed recall High RPM recall   Gauges:  Speedometer (0-255 MPH / KM/H) Tachometer (0-9,990 RPM) Oil Pressure (0-100 psi displayed in 1 psi increments) Water Temperature (100-300ºF / 40-150ºC displayed in 1ºF/ºC increments) Voltmeter (9-17 VDC)Fuel Level (0-99% full)   Lighting:Auto-contrasting LCD display for optimal view in the brightest of sunlight.LED backlit at night to match/complete the look at night. Built-In Indicators Turn Signals (Left/ Right) High Beam Check Engine Parking Brake Cruise Control (On/ On & Engaged when vehicle is equipped) Gear Position (Optional GSS-2000 sensor required, sold separately) 4 x 4 (When vehicle is equipped) Wait to Start (When vehicle is equipped)   Included Sensors: Water Temperature - 1/8" NPT, ground isolated sensor with a 10 ft harness. Oil Pressure - 1/8" NPT solid state sensor with a 10 ft harness. Cable Drive Speed Sensor/Generator - Replaces GM style speedometer cables with a 10 ft harness (Tremec and Ford style adapters available upon request). Bushings - Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads.   Calibration Pushbutton - Dakota Digital instruments are programmed and operated by the push of a button. Simply mount the included pushbuttons supplied with your gauges in a convenient and easily accessible location. These buttons are used to calibrate your speedometer, set the cylinder count and the fuel level gauge. Once properly configured these same buttons are used to access the wealth of information located in the Digital Message Centers.   More info about this system and pics are available below. This listing is for ONE VHX gauge system with your choice of style and backlighting color. Please let us know your options when you make your purchase.   Metric system (KM/H and degrees Celsius) is available as a custom option (no additional cost) but may take 4-8 weeks to build.   Wiring and Setup Manual Quick Start Guide VLC Operation Manual VLK Operation Manual VHX-67C-PA: Mounting Manual VHX-67C-PU: Mounting Manual  
    • $945.25
    Backorder available
    • Free shipping
    • 5% less
  • Dakota 66-67 Chevelle El Camino Analog Gauges Carbon Fiber Blue VHX-66C-CVL-C-B
    Dakota Digital 1966 - 67 Chevy Chevelle and El Camino SS VHX Instruments Fits: 1966 1967 Chevrolet Chevelle and El Camino VHX-66C-CVL-C-B with CARBON FIBER Style and BLUE BacklightingThe first major redesign of the new A-body platform saw many styling changes, and the instrument system was among the updates. VHX-66C-CVL is a direct bolt-in replacement using an original or reproduction bezel (available separately) that fits six analog readouts with the addition on a single, large LCD message center. Fully lit needles, backlit faces, and highly visible LCD message centers are a few of the things that you can see which set the VHX Series apart from yesterday’s traditional approach to instrumentation. A few of the features which you don’t normally see are the micro-controlled precision stepper motors, solid state sensors for unparalleled accuracy, and user-customizable display feedback, all supported by an unrivaled limited lifetime warranty which has become the standard for Dakota Digital instrumentation systems . Completely engineered and manufactured at our facility in Sioux Falls, South Dakota, the VHX Series has completely revolutionized the instrumentation industry!*Bezel not included, shown for visual/presentation purposes* System uses OEM or reproduction style bezel VHX System Includes: Analog Gauges Speedometer - 0-160 MPH (optional metric version 0-255 kmh) Tachometer - 0-8000 RPM Oil Pressure - 0-80 psi Water Temperature - 100-260ºF (optional metric version 40-120ºC) Fuel Level - E, 1/4, 1/2, 3/4, F Voltmeter - 9-17 VDC Lighting - Back lit technology is popular with performance instrumentation due to precise lighting allowing you see what is truly important when you really need it at a quick glance. Each number, tick mark, annunciator, needle, indicator and digital message center is lit by a series of LEDs behind the gauge face. Digital Message Center Standard Displays: Odometer (One time user settable, Million Mile) Dual (A/B) Trip Meter (0-9,999.9) Clock (12 hour) Performance Meters:  0-60 MPH Timer (0-100 kmh) 1/4 mile time 1/4 mile end speed (trap speed) High speed recall High RPM recall Gauges:  Speedometer (0-255 MPH / KM/H) Tachometer (0-9,990 RPM) Oil Pressure (0-100 psi displayed in 1 psi increments) Water Temperature (100-300ºF / 40-150ºC displayed in 1ºF/ºC increments) Voltmeter (9-17 VDC) Fuel Level (0-99% full) Lighting: Auto-contrasting LCD display for optimal view in the brightest of sunlight. LED backlit at night to match/complete the look at night. Built-In Indicators Turn Signals (Left/ Right) High Beam Check Engine Parking Brake Cruise Control (On/ On & Engaged when vehicle is equipped) Gear Position (Optional GSS-2000 sensor required, sold separately) 4 x 4 (When vehicle is equipped) Wait to Start (When vehicle is equipped) Included Sensors: Water Temperature - 1/8" NPT, ground isolated sensor with a 10 ft harness. Oil Pressure - 1/8" NPT solid state sensor with a 10 ft harness. Cable Drive Speed Sensor/Generator - Replaces GM style speedometer cables with a 10 ft harness (Tremec and Ford style adapters available upon request). Bushings - Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads. Calibration Pushbutton - Dakota Digital instruments are programmed and operated by the push of a button. Simply mount the included pushbuttons supplied with your gauges in a convenient and easily accessible location. These buttons are used to calibrate your speedometer, set the cylinder count and the fuel level gauge. Once properly configured these same buttons are used to access the wealth of information located in the Digital Message Centers. More info about this system and pics are available below. This listing is for ONE VHX gauge system with your choice of style and backlighting color. Please let us know your options when you make your purchase. Metric system (KM/H and degrees Celsius) is available as a custom option (no additional cost) but may take 4-8 weeks to build.Wiring and Setup ManualQuick Start GuideMounting Manual
    • $850.25
    3 left in stock. Backorder available
    • Free shipping
    • 5% less
  • 1970-72 Chevy Chevelle/ El Camino VHX System, Carbon Fiber Style Face, Red Display
    1970-72 Chevy Chevelle/ El Camino VHX System, Carbon Fiber Style Face, Red Display
    • $945.25
    • Free shipping
    • 5% less
  • Dakota Digital 66-67 Chevelle El Camino Analog Gauges Black Blue VHX-66C-CVL-K-B
    Dakota Digital 1966 - 67 Chevy Chevelle and El Camino SS VHX Instruments Fits: 1966 1967 Chevrolet Chevelle and El Camino VHX-66C-CVL-K-B with BLACK ALLOY Style and BLUE BacklightingThe first major redesign of the new A-body platform saw many styling changes, and the instrument system was among the updates. VHX-66C-CVL is a direct bolt-in replacement using an original or reproduction bezel (available separately) that fits six analog readouts with the addition on a single, large LCD message center. Fully lit needles, backlit faces, and highly visible LCD message centers are a few of the things that you can see which set the VHX Series apart from yesterday’s traditional approach to instrumentation. A few of the features which you don’t normally see are the micro-controlled precision stepper motors, solid state sensors for unparalleled accuracy, and user-customizable display feedback, all supported by an unrivaled limited lifetime warranty which has become the standard for Dakota Digital instrumentation systems . Completely engineered and manufactured at our facility in Sioux Falls, South Dakota, the VHX Series has completely revolutionized the instrumentation industry!*Bezel not included, shown for visual/presentation purposes* System uses OEM or reproduction style bezel VHX System Includes: Analog Gauges Speedometer - 0-160 MPH (optional metric version 0-255 kmh) Tachometer - 0-8000 RPM Oil Pressure - 0-80 psi Water Temperature - 100-260ºF (optional metric version 40-120ºC) Fuel Level - E, 1/4, 1/2, 3/4, F Voltmeter - 9-17 VDC Lighting - Back lit technology is popular with performance instrumentation due to precise lighting allowing you see what is truly important when you really need it at a quick glance. Each number, tick mark, annunciator, needle, indicator and digital message center is lit by a series of LEDs behind the gauge face. Digital Message Center Standard Displays: Odometer (One time user settable, Million Mile) Dual (A/B) Trip Meter (0-9,999.9) Clock (12 hour) Performance Meters:  0-60 MPH Timer (0-100 kmh) 1/4 mile time 1/4 mile end speed (trap speed) High speed recall High RPM recall Gauges:  Speedometer (0-255 MPH / KM/H) Tachometer (0-9,990 RPM) Oil Pressure (0-100 psi displayed in 1 psi increments) Water Temperature (100-300ºF / 40-150ºC displayed in 1ºF/ºC increments) Voltmeter (9-17 VDC) Fuel Level (0-99% full) Lighting: Auto-contrasting LCD display for optimal view in the brightest of sunlight. LED backlit at night to match/complete the look at night. Built-In Indicators Turn Signals (Left/ Right) High Beam Check Engine Parking Brake Cruise Control (On/ On & Engaged when vehicle is equipped) Gear Position (Optional GSS-2000 sensor required, sold separately) 4 x 4 (When vehicle is equipped) Wait to Start (When vehicle is equipped) Included Sensors: Water Temperature - 1/8" NPT, ground isolated sensor with a 10 ft harness. Oil Pressure - 1/8" NPT solid state sensor with a 10 ft harness. Cable Drive Speed Sensor/Generator - Replaces GM style speedometer cables with a 10 ft harness (Tremec and Ford style adapters available upon request). Bushings - Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads. Calibration Pushbutton - Dakota Digital instruments are programmed and operated by the push of a button. Simply mount the included pushbuttons supplied with your gauges in a convenient and easily accessible location. These buttons are used to calibrate your speedometer, set the cylinder count and the fuel level gauge. Once properly configured these same buttons are used to access the wealth of information located in the Digital Message Centers. More info about this system and pics are available below. This listing is for ONE VHX gauge system with your choice of style and backlighting color. Please let us know your options when you make your purchase. Metric system (KM/H and degrees Celsius) is available as a custom option (no additional cost) but may take 4-8 weeks to build.Wiring and Setup ManualQuick Start GuideMounting Manual
    • $850.25
    1 left in stock. Backorder available
    • Free shipping
    • 5% less
  • Dakota Digital 55-56 Chevy Car Analog Black Alloy Blue LED Gauges VHX-55C-K-B
    Dakota Digital 1955 - 56 Chevy 150, 210 & Bel Air VHX Instruments Fits: 1955 1956 Chevrolet 150, 210 & Bel Air VHX-55C-K-B with Black Alloy Style and Blue Backlighting  The new VHX Systems fit directly into the stock instrument bezel of a 1955-56 Chevy car without modification, adding a wealth of features to this iconic vehicle. The 1955-56 Chevy car dash is lacking in information; VHX-55C makes use of the iconic factory gauge cluster, filling it out with six analog readouts on top of dual LCD message centers. Able to be used with factory or reproduction bezels (sold separately). Factory gear-indicator is eliminated; use GSS-2000 for full gear-word readouts in the message centers. Fully lit needles, backlit faces, and highly visible LCD message centers are a few of the things that you can see which set the VHX Series apart from yesterday’s traditional approach to instrumentation. A few of the features which you don’t normally see are the micro-controlled precision stepper motors, solid state sensors for unparalleled accuracy, and user-customizable display feedback, all supported by an unrivaled limited lifetime warranty which has become the standard for Dakota Digital instrumentation systems . Completely engineered and manufactured at our facility in Sioux Falls, South Dakota, the VHX Series has completely revolutionized the instrumentation industry! Instrument system eliminates the stock automatic gear shift indicator immediately above steering column. To display gear position, add GSS-2000 Gear Shift Sensor (sold separately) *Bezel not included, shown for visual/presentation purposes* System uses OEM or reproduction style bezel VHX System Includes: Analog Gauges Speedometer - 0-160 MPH (optional metric version 0-255 kmh) Tachometer - 0-8000 RPM Oil Pressure - 0-80 psi Water Temperature - 100-260ºF (optional metric version 40-120ºC) Fuel Level - E, 1/4, 1/2, 3/4, F Voltmeter - 9-17 VDC Lighting - Back lit technology is popular with performance instrumentation due to precise lighting allowing you see what is truly important when you really need it at a quick glance. Each number, tick mark, annunciator, needle, indicator and digital message center is lit by a series of LEDs behind the gauge face. Digital Message Center Standard Displays: Odometer (One time user settable, Million Mile) Dual (A/B) Trip Meter (0-9,999.9) Clock (12 hour) Performance Meters:  0-60 MPH Timer (0-100 kmh) 1/4 mile time 1/4 mile end speed (trap speed) High speed recall High RPM recall Gauges:  Speedometer (0-255 MPH / KM/H) Tachometer (0-9,990 RPM) Oil Pressure (0-100 psi displayed in 1 psi increments) Water Temperature (100-300ºF / 40-150ºC displayed in 1ºF/ºC increments) Voltmeter (9-17 VDC) Fuel Level (0-99% full) Lighting: Auto-contrasting LCD display for optimal view in the brightest of sunlight. LED backlit at night to match/complete the look at night. Built-In Indicators Turn Signals (Left/ Right) High Beam Check Engine Parking Brake Cruise Control (On/ On & Engaged when vehicle is equipped) Gear Position (Optional GSS-2000 sensor required, sold separately) 4 x 4 (When vehicle is equipped) Wait to Start (When vehicle is equipped) Included Sensors: Water Temperature - 1/8" NPT, ground isolated sensor with a 10 ft harness. Oil Pressure - 1/8" NPT solid state sensor with a 10 ft harness. Cable Drive Speed Sensor/Generator - Replaces GM style speedometer cables with a 10 ft harness (Tremec and Ford style adapters available upon request). Bushings - Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads. Calibration Pushbutton - Dakota Digital instruments are programmed and operated by the push of a button. Simply mount the included pushbuttons supplied with your gauges in a convenient and easily accessible location. These buttons are used to calibrate your speedometer, set the cylinder count and the fuel level gauge. Once properly configured these same buttons are used to access the wealth of information located in the Digital Message Centers.Wiring and Setup ManualQuick Start GuideMounting ManualVLC Operation ManualVLK Operation ManualVLC/ VLK Mounting Manual
    • $850.25
    Backorder available
    • Free shipping
    • 5% less
  • 67 68 Chevy Camaro Pontiac Firebird Analog Black White Gauge VHX-67C-CAM-K-W Kit
    Dakota Digital 1967 - 68 Chevy Camaro and Firebird VHX Instruments Fits: 1967 1968 Chevrolet Camaro and Pontiac Firebird VHX-67C-CAM-K-W with Black Alloy Style and White BacklightingThe first generation Camaro and Firebird started a legacy with unmatched popularity to this day. VHX-67C-CAM is a terrific way to update your pony car without losing its original style. Simple installation using a stock or reproduction instrument bezel (available separately) yielding full instrumentation will have admirers doing a double-take. Fully lit needles, backlit faces, and highly visible LCD message centers are a few of the things that you can see which set the VHX Series apart from yesterday’s traditional approach to instrumentation. A few of the features which you don’t normally see are the micro-controlled precision stepper motors, solid state sensors for unparalleled accuracy, and user-customizable display feedback, all supported by an unrivaled limited lifetime warranty which has become the standard for Dakota Digital instrumentation systems . Completely engineered and manufactured at our facility in Sioux Falls, South Dakota, the VHX Series has completely revolutionized the instrumentation industry!*Bezel not included, shown for visual/presentation purposes* System uses OEM or reproduction style bezel VHX System Includes: Analog Gauges Speedometer - 0-160 MPH (optional metric version 0-255 kmh) Tachometer - 0-8000 RPM Oil Pressure - 0-80 psi Water Temperature - 100-260ºF (optional metric version 40-120ºC) Fuel Level - E, 1/4, 1/2, 3/4, F Voltmeter - 9-17 VDC Lighting - Back lit technology is popular with performance instrumentation due to precise lighting allowing you see what is truly important when you really need it at a quick glance. Each number, tick mark, annunciator, needle, indicator and digital message center is lit by a series of LEDs behind the gauge face. Digital Message Center Standard Displays: Odometer (One time user settable, Million Mile) Dual (A/B) Trip Meter (0-9,999.9) Clock (12 hour) Performance Meters:  0-60 MPH Timer (0-100 kmh) 1/4 mile time 1/4 mile end speed (trap speed) High speed recall High RPM recall Gauges:  Speedometer (0-255 MPH / KM/H) Tachometer (0-9,990 RPM) Oil Pressure (0-100 psi displayed in 1 psi increments) Water Temperature (100-300ºF / 40-150ºC displayed in 1ºF/ºC increments) Voltmeter (9-17 VDC) Fuel Level (0-99% full) Lighting: Auto-contrasting LCD display for optimal view in the brightest of sunlight. LED backlit at night to match/complete the look at night. Built-In Indicators Turn Signals (Left/ Right) High Beam Check Engine Parking Brake Cruise Control (On/ On & Engaged when vehicle is equipped) Gear Position (Optional GSS-2000 sensor required, sold separately) 4 x 4 (When vehicle is equipped) Wait to Start (When vehicle is equipped) Included Sensors: Water Temperature - 1/8" NPT, ground isolated sensor with a 10 ft harness. Oil Pressure - 1/8" NPT solid state sensor with a 10 ft harness. Cable Drive Speed Sensor/Generator - Replaces GM style speedometer cables with a 10 ft harness (Tremec and Ford style adapters available upon request). Bushings - Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads. Calibration Pushbutton - Dakota Digital instruments are programmed and operated by the push of a button. Simply mount the included pushbuttons supplied with your gauges in a convenient and easily accessible location. These buttons are used to calibrate your speedometer, set the cylinder count and the fuel level gauge. Once properly configured these same buttons are used to access the wealth of information located in the Digital Message Centers. More info about this system and pics are available below. This listing is for ONE VHX gauge system with your choice of style and backlighting color. Please let us know your options when you make your purchase. Metric system (KM/H and degrees Celsius) is available as a custom option (no additional cost) but may take 4-8 weeks to build.Wiring and Setup ManualQuick Start GuideMounting Manual
    • $802.75
    Backorder available
    • Free shipping
    • 10% less
  • Dakota Digital 64-65-66 Chevy Pickup Truck HDX Dash Gauge Kit Black HDX-64C-PU-K
    Dakota Digital 1964-1965-1966 Chevrolet Pickup Customizable Digital / Analog Dash Gauge Kit - Black AlloyHDX-64C-PU-K  Included Analog Gauges: Speedometer, Tachometer, Oil Pressure, Water Temp, Voltmeter, and Fuel Level. Black alloy gauge-face styling, each HDX system allows the user to select their favorite illumination color for the gauge readings and needles, as well as the TFT message center displays. Various Indicators can be displayed in the Digital Message Centers: Turn Signals, High Beam, Check Engine, Parking Brake, Cruise Control, Odometer, Clock, Trip Meter... Necessary sensors included for oil pressure (1/8” NPT), Water Temp (1/8" with bushings for 1/4", 3/8", 1/2” NPT as well 12mm and 16mm for GM & LS applications) and speedometer pulse generator.The once forgotten 1964-66 Chevy pickups have stepped into the limelight, and this direct-fit instrument system is the perfect way to finish off your C10. Six analog gauge sweeps with a large TFT display taking center stage offer a blend of high-tech functionality and classic looks while keeping the driver informed of under-hood activities. This one-piece system bolts to your stock or reproduction bezel using supplied hardware but does not fit GMC (bezel is NOT included).*Bezel is not included, shown for visual/ presentation purposes. System use OEM or reproduction style bezel.Available with your choice of black or silver alloy gauge-face styling, each HDX system allows the user to select their favorite illumination color for the gauge readings and needles, as well as the TFT message center displays. RGB LEDs are incorporated into the circuit boards for fully-adjustable display colors, allowing the user to personalize their instrument system to match nearly any vehicle theme.Calibration and personal settings are manipulated with the built-in, capacitive-touch buttons, or the Bluetooth app for Apple and Android devices. Each needle hub is black nickel plated spun-aluminum to match the buttons. All HDX instrument systems feature dead-faced indicators (turn signals, high beam, check engine, cruise control, parking brake, plus two user-definable), and a red, settable warning light for each gauge.  With the central control box, installation is greatly simplified with vehicle-harness sourced signals and supplied, solid state sending units connecting cleanly to their respective terminal. Scroll through the listing below for a more in-depth look at the HDX series! Metric system (KM/H and degrees Celsius) is available as a custom option for no additional cost, but may take a few weeks longer to build. The HDX series from Dakota Digital is the latest in aftermarket automotive instrumentation technology. HDX takes personalization and usability to a whole new dimension while retaining your favorite features from the wildly popular VHX-series such as LED backlighting for the numbers, tick marks and dead-faced dash indicators (turn signals, high beam, check engine, cruise control engaged and parking brake). Illuminated needles and a lifetime warranty are still part of the deal as well.  These features add up to a clean, easy to read instrument system in all conditions. Precision stepper motors provide accurate needle movement along with a full-sweep at key-on, and the needle hubs are black nickel plated spun-aluminum. With the instrument system dialed in, including calibration of the speedometer and fuel gauge, the system can calculate your remaining fuel range, expressed in miles to empty.   Every kit is supplied with an optional buzzer for feedback each time a button is pressed. Further, the buzzer can emit a warning tone for each reading at a user-defined set point to coincide with the dead-faced, red warning lights incorporated into the gauge faces. Vehicle integration through a central control box has become a calling card for Dakota Digital, and the advantages are substantial. Most notably, installation is greatly simplified; two power (constant and switched) and one ground connection get things up and running, while vehicle-harness sourced signals and sensor inputs run cleanly to their respective terminal. Supplied, solid state sending units with weather-tight harnesses ensure trouble-free operation. The control box allows for easier service, a nicer-looking finished product, in addition to an abundance of technology packed into a vintage dashboard. HDX System Includes: Analog Gauges Speedometer - 0-160 MPH (optional metric version 0-260 kmh). Split scale provides resolution of a 120MPH speedometer, with a top end range of 160MPH.Tachometer - 0-8000 RPM Oil Pressure - 0-80 psi Water Temperature - 100-260ºF (optional metric version 40-120ºC) Fuel Level - E, 1/4, 1/2, 3/4, F Voltmeter - 9-17 VDC Digital Message Centers Standard Displays:Odometer (One time user settable, Million Mile) Dual (A/B) Trip Meter (0-9,999.9)Clock (12 hour)Estimated Range/Miles to Empty Performance Meters: 0-60 MPH Timer (0-100 kmh) 1/4  and 1/8 mile time 1/4 and 1/8 mile end speed (trap speed) High speed recall High RPM recall Gauges: Speedometer (0-255 MPH / KM/H) Tachometer (0-9,990 RPM) Oil Pressure (0-100 psi displayed in 1 psi increments) Water Temperature (100-300ºF / 40-150ºC displayed in 1ºF/ºC increments) Voltmeter (9-17 VDC)Fuel Level (0-99% full)Built-In Indicators: Turn Signals (Left/ Right) High Beam Check Engine Parking Brake Cruise Control (On/ On & Engaged when vehicle is equipped) Gear Position (Optional GSS-2000 sensor required, sold separately) 4 x 4 (When vehicle is equipped) Wait to Start (When vehicle is equipped) Two Auxiliary input indicators with user-programmable labelsEach analog gauge sweep contains a red LED indicator for quick notice of a warning condition (except speedometer)Lighting:ColorsOver 30 user-selectable color options allow you to independently change the needle color, sweep color and digital TFT display color.BrightnessBoth daytime and nighttime brightness can be easily controlled through the HDX setup menu, allowing you to choose your preferred lighting intensity level, toggled by the activation of the headlight switch. If on-the-fly rotary type control is desired, the DIM-1 (sold separately) is a common accessory to add this functionality.ThemesWith 12 factory preset color themes, you can quickly create a beautiful looking system. Or, for the ultimate in customization, choose all of the color zones yourself.TechnologyFull LED backlighting provides a strikingly visual gauge package, with sharp contrast for ease of viewing both night and day. Full RBG backlighting allows you to create the specific color you want, with a unique daytime and nighttime theme if desired. Whether your goal is an OE look or something truly bold, the HDX Series lets you make the choice.Included Sensors: Water Temperature - 1/8" NPT, ground isolated sensor with a 10 ft harness.Oil Pressure - 1/8" NPT solid state sensor with a 10 ft harness.Cable Drive Speed Sensor/Generator - Replaces GM style speedometer cables with a 10 ft harness. Tremec and Ford style adapters available upon request.Bushings - Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads.Calibration and UsePushbutton ControlAll HDX Series Instrument Systems included LED-lit onboard capacitive touch pushbuttons through the gauge face. These pushbuttons provide quick and consistent access to all functions, either in driving mode or while in the setup menu. Button-press feedback is available through the TFT Message Center, or through the included buzzer. Additionally, remote mounted switches can be wired into the HDX system if this proves more accessible based upon seating position. The HDX series can also be completely configured through the Bluetooth app, suitable to Android and Apple devices. Download the free app to your tablet or smart phone, sync your device to the HDX system, and enjoy quick and convenient menu navigation and real time gauge readouts for diagnostic use or a secondary display. CalibrationAll calibration settings are handled through onboard capacitive touch switches or the remote Bluetooth app. While many calibration settings exist, the speedometer and fuel level are completed in most cases (unless GPS-50-2 is used, negating the need to calibrate the speedometer - GPS-50-2 is available for purchase separately) through a few taps of the pushbuttons and a short test drive of the vehicle.Installation Manuals:Wiring and Setup Manual Quick Start Manual Clock Operation Manual Mounting Manual
    • $1420.25
    2 left in stock. Backorder available
    • Free shipping
    • 5% less
  • Dakota Digital Tire Pressure Monitoring System TPMS Module Set of 4 BIM-22-2
    Dakota DigitalTire Pressure Monitoring System (TPMS)Compatible with Dakota Digital HDX and RTX SystemsBIM-22-2No more tire kicking! This expansion module for Dakota Digital HDX/RTX instrument systems gives you real-time pressure readings for all four tires, displayed in your existing message center! Wireless valve stem sensors (dismount tire to install) report back to a vehicle-mounted receiver for on the fly information. Easily reprogrammable upon tire rotation or replacement, this is the finishing touch for your hot rod! Kit is complete with 4 valve stem sensors. Limited compatibility with VFD3 Digital and VHX Series Instrument Systems ordered at the same time as a BIM-22-2.  Consult a Dakota Digital sales rep for more information on compatibility with these kits.  * Compatible with Dakota Digital HDX and RTX Systems ** Not available as a standalone system. *** Maximum of 4 sensors can be used.
    • $427.45
    4 left in stock. Backorder available
    • Free shipping
Products: 2536 of 2288
  • Red LED RH Tail Light Clear Lens & Chrome Housing for 1940-53 Chevy GMC Truck
    Octane LightingNew -  12v Chrome RH LED Tail Light AssemblyRed LEDs & Clear LensFits: 1940-1953 Chevy & GMC TrucksOne New LED Tail Light Lens AssemblyFits Right (Passenger) Side OnlyClear LensSuper Bright Red LEDsChrome Plated Steel Housing & Bezel12-VoltFits 1940-1953 Chevy & GMC Pickup TruckQty: 1 (One) LED AssemblyFits: 40-41-42-43-44-45-46-47-48-49-50-51-52-53-1940-1941-1942-1943-1944-1945-1946-1947-1948-1949-1950-1951-1952-1953 Chevy & GMC Trucks
    • $60.95
    4 left in stock.
  • LED Tail Lamp Clear Lens & Chrome Housing Flasher Pair for 40-53 Chevy GMC Truck
    Octane LightingNew Pair -  12v Chrome LED Tail Light Assemblies & FlasherRed LEDs & Clear LensesFits: 1940-1953 Chevy & GMC TrucksTwo New LED Tail Light Lens AssembliesFits Left (Driver) & Right (Passenger) SidesClear LensesSuper Bright Red LEDsChrome Plated Steel Bezels & Housings12-VoltDriver Side Assembly Includes License LightLED Flasher Also IncludedFlasher Required for Successful LED ConversionFits 1940-1953 Chevy & GMC Pickup TruckQty: 2 (Two) LED Assemblies & 1 LED FlasherFits: 40-41-42-43-44-45-46-47-48-49-50-51-52-53-1940-1941-1942-1943-1944-1945-1946-1947-1948-1949-1950-1951-1952-1953 Chevy & GMC Trucks
    • $149.95
    4 left in stock.
  • Red LED Tail Light Clear Lens w/ Chrome Housing Pair for 1940-53 Chevy GMC Truck
    Octane LightingNew Pair -  12v Chrome LED Tail Light Assemblies Fits: 1940-1953 Chevy & GMC TrucksTwo New LED Tail Light Lens AssembliesFits Left (Driver) & Right (Passenger) SidesClear Lenses Super Bright Red LEDsChrome Plated Steel Housings & Bezels12-VoltDriver Side Assembly Includes License LightFits 1940-1953 Chevy & GMC Pickup TruckQty: 2 (Two) LED AssembliesFits: 40-41-42-43-44-45-46-47-48-49-50-51-52-53-1940-1941-1942-1943-1944-1945-1946-1947-1948-1949-1950-1951-1952-1953 Chevy & GMC Trucks
    • $132.95
    4 left in stock.
  • Red LED LH Tail Light Clear Lens & Chrome Housing for 1940-53 Chevy GMC Truck
    Octane LightingNew -  12v Chrome RH LED Tail Light AssemblyRed LEDs & Clear LensFits: 1940-1953 Chevy & GMC TrucksOne New LED Tail Light Lens AssemblyFits Left (Driver) Side OnlyClear LensSuper Bright Red LEDsAlso Features White LED License LightChrome Plated Steel Housing & Bezel12-VoltFits 1940-1953 Chevy & GMC Pickup TruckQty: 1 (One) LED AssemblyFits: 40-41-42-43-44-45-46-47-48-49-50-51-52-53-1940-1941-1942-1943-1944-1945-1946-1947-1948-1949-1950-1951-1952-1953 Chevy & GMC Trucks
    • $70.95
    4 left in stock.
You are on page 3, click to load from start
  • Dakota Digital RTX Dash Gauge Kit Black for 1961-62 Chevy Impala RTX-61C-IMP-X
    Dakota Digital1961-1962 Chevrolet Impala Customizable Digital / Analog Dash Gauge Kit - Black AlloyOver 30 User-Selectable Color Options for Dash Needle & SweepRTX-61C-IMP-XEmbrace the shapes in your 1961-62 Chevy dashboard and drop this multi-function, multi-color beauty in place! New aluminum chrome bezels are supplied for the round gauges, while your stock stamped trim for the speedometer is reused. From three-wheeling down Whittier Blvd. to power shifting a 409/425, the stock look will make you smile every time you hit the key! The RTX series is the latest from Dakota Digital, focused on retaining that stock look without sacrificing the late-model features you love. Every effort has been put forth to incorporate OEM design elements regarding the layout, face styling and indicators. A casual glance may dismiss these as original equipment, but once you hit the switch and the LED backlighting comes on in your favorite color scheme, all doubts will be removed. Starting from scratch, CNC machined housings are filled with electronics designed and built in-house, helping Dakota Digital once again raise the bar for aftermarket instrumentation. The high-definition TFT message centers can be fully configured to display just about any piece of information needed. As you’ve come to expect from Dakota Digital, the RTX series utilizes a central control box to make installation and setup as easy as possible. Click the tabs below for a more in-depth look at the RTX series!*Uses factory bezel/ trim/ fascia (not included.for demonstration purposes only).Analog GaugesSpeedometer ·0 -120 MPH (optional metric version 0- 240 kmh)Tachometer ·0- 8,000 RPMOil Pressure ·0- 80 psiWater Temperature ·100- 260ºF (optional metric version 40- 120ºC)Fuel Level ·E, 1/4, 1/2, 3/4, FVoltmeter ·9- 17 VDCDigital Message CentersStandard Displays ·Odometer (One time user settable, Million Mile) ·Dual (A/B) Trip Meter (0- 9,999.9) ·Clock (12 hour) ·Estimated Range/ Miles to EmptyPerformance Meters ·0- 60 MPH Timer (0- 100 kmh) ·1/4 and 1/8 mile time ·1/4 and 1/8 mile end speed (trap speed) ·High speed recall ·High RPM recallBuilt-in IndicatorsIndicators ·Turn Signals (Left/ Right) ·High Beam ·Check Engine ·Parking Brake ·Cruise Control (On/ On & Engaged when vehicle is equipped) ·Gear Position (Optional GSS-3000 sensor required) ·4 x 4 (When vehicle is equipped) ·Wait to Start (When vehicle is equipped) ·Two Auxiliary input indicators with user-programmable labels ·Each analog gauge sweep contains a red LED indicator for quick notice of a warning condition (except speedometer) **Not all OEM indicator lamp functions will be replaced.    If additional indicators are desired within the new instrument system, consider repurposing any unused indicators to suit your application.Lighting TechnologyColors ·Over 30 user-selectable color options allow you to independently change the needle color, sweep color and digital TFT display color.Brightness ·Both daytime and nighttime brightness can be easily controlled through the HDX setup menu, allowing you to choose your preferred lighting intensity level, toggled by the activation of the headlight switch. If on-the-fly rotary type control is desired, the DIM-1 is a common accessory to add this functionality.Themes ·With 12 factory preset color themes, you can quickly create a beautiful looking system. Or, for the ultimate in customization, choose all of the color zones yourself.Technology ·Full LED backlighting provides a strikingly visual gauge package, with sharp contrast for ease of viewing both night and day. Full RBG backlighting allows you to create the specific color you want, with a unique daytime and nighttime theme if desired. Whether your goal is an OE look or something truly bold, the HDX Series lets you make that choice.Included SensorsWater Temperature ·1/8" NPT, ground isolated sensor with a 10 ft harness.Oil Pressure ·1/8" NPT solid state sensor with a 10 ft harness.Cable Driven Speed Sensor/ Generator ·Replaces GM style speedometer cables with a 10 ft harness. Sensor requires approximately 5" clearance extending between the cable drive output and any obstruction. Part # 130011 (sold separately) allows for relocation of the pulse generator when additional clearance is required. (Tremec and Ford style adaptors available on request.)Bushings ·Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads.Control Box Dimensions5.5" x 3.5"x 1"Calibration and UsePushbutton Control ·Dakota Digital instrument systems are programmed and operated by the push of a button. A two-sided rocker switch is included with each package; mount this switch in an easily accessible location when in the driving position. The rocker switch provide quick and consistent access to all functions, either in driving mode or while in the setup menu. Button-press feedback is available through the TFT Message Center, or through the included buzzer. Once configured, this same switch is used to access the wealth of information located in the digital message centers.Mobile App ·RTX instrument systems can also be completely configured through the available mobile app, suitable to Android and Apple devices. Using your existing tablet or smart phone, download the free app, sync your device to the RTX system, and enjoy quick and convenient menu navigation and real time gauge readouts for diagnostic use or a secondary display.Calibration ·All calibration settings are handled through the included pushbutton switch or the remote Bluetooth app. While many calibration settings exist, the speedometer and fuel level are completed in most cases (unless GPS-50-2 is used, negating the need to calibrate the speedometer) through a few taps of the pushbuttons and a short test drive of the vehicle.
    • $1495.00
    Backorder available
    • Free shipping
    • 6% less
  • Dakota Digital 1977-90 Chevy Caprice Impala Analog Gauge Kit Black HDX-77C-CAP-K
    Get your box Chevy lookin’ right with this bolt-in system! No cutting is required to have color-changing backlighting, full-color digital screens and mobile-app compatibility, but there will be a bit of wiring to complete the conversion. Installation and setup are easy whether you have a stock drivetrain or LS-conversion; we have you covered! Kit fits 1977-90 Chevy B-bodies and 1984-86 Pontiac Parisienne (bezel is NOT included). *Bezel is NOT included, shown for visual/presentation purposes only.System uses OEM or reproduction style bezel. Each HDX system allows the user to select their favorite illumination color for the gauge readings and needles, as well as the TFT message center displays. RGB LEDs are incorporated into the circuit boards for fully-adjustable display colors, allowing the user to personalize their instrument system to match nearly any vehicle theme. Calibration and personal settings are manipulated with the built-in, capacitive-touch buttons, or the Bluetooth app for Apple and Android devices. Each needle hub is black nickel plated spun-aluminum to match the buttons. All HDX instrument systems feature dead-faced indicators (turn signals, high beam, check engine, cruise control, parking brake, plus two user-definable), and a red, settable warning light for each gauge.  With the central control box, installation is greatly simplified with vehicle-harness sourced signals and supplied, solid state sending units connecting cleanly to their respective terminal. Scroll through the listing below for a more in-depth look at the HDX series! The HDX series from Dakota Digital is the latest in aftermarket automotive instrumentation technology. HDX takes personalization and usability to a whole new dimension while retaining your favorite features from the wildly popular VHX-series such as LED backlighting for the numbers, tick marks and dead-faced dash indicators (turn signals, high beam, check engine, cruise control engaged and parking brake). Illuminated needles and a lifetime warranty are still part of the deal as well.  These features add up to a clean, easy to read instrument system in all conditions. Precision stepper motors provide accurate needle movement along with a full-sweep at key-on, and the needle hubs are black nickel plated spun-aluminum. With the instrument system dialed in, including calibration of the speedometer and fuel gauge, the system can calculate your remaining fuel range, expressed in miles to empty.   Every kit is supplied with an optional buzzer for feedback each time a button is pressed. Further, the buzzer can emit a warning tone for each reading at a user-defined set point to coincide with the dead-faced, red warning lights incorporated into the gauge faces. Vehicle integration through a central control box has become a calling card for Dakota Digital, and the advantages are substantial. Most notably, installation is greatly simplified; two power (constant and switched) and one ground connection get things up and running, while vehicle-harness sourced signals and sensor inputs run cleanly to their respective terminal. Supplied, solid state sending units with weather-tight harnesses ensure trouble-free operation. The control box allows for easier service, a nicer-looking finished product, in addition to an abundance of technology packed into a vintage dashboard.   HDX System Includes: Analog Gauges Speedometer - 0-160 MPH (optional metric version 0-260 kmh). Split scale provides resolution of a 120MPH speedometer, with a top end range of 160MPH.Tachometer - 0-8000 RPMOil Pressure - 0-80 psiWater Temperature - 100-260ºF (optional metric version 40-120ºC)Fuel Level - E, 1/4, 1/2, 3/4, FVoltmeter - 9-17 VDC   Digital Message Centers Standard Displays: Odometer (One time user settable, Million Mile)Dual (A/B) Trip Meter (0-9,999.9)Clock (12 hour)Estimated Range/Miles to Empty Performance Meters:  0-60 MPH Timer (0-100 kmh)1/4  and 1/8 mile time1/4 and 1/8 mile end speed (trap speed)High speed recallHigh RPM recall Gauges:  Speedometer (0-255 MPH / KM/H)Tachometer (0-9,990 RPM)Oil Pressure (0-100 psi displayed in 1 psi increments)Water Temperature (100-300ºF / 40-150ºC displayed in 1ºF/ºC increments)Voltmeter (9-17 VDC)Fuel Level (0-99% full) Built-In Indicators: Turn Signals (Left/ Right)High BeamCheck EngineParking BrakeCruise Control (On/ On & Engaged when vehicle is equipped)Gear Position (Optional GSS-3000 sensor required, sold separately)4 x 4 (When vehicle is equipped)Wait to Start (When vehicle is equipped)Two Auxiliary input indicators with user-programmable labelsEach analog gauge sweep contains a red LED indicator for quick notice of a warning condition (except speedometer) Lighting:Colors Over 30 user-selectable color options allow you to independently change the needle color, sweep color and digital TFT display color. Brightness Both daytime and nighttime brightness can be easily controlled through the HDX setup menu, allowing you to choose your preferred lighting intensity level, toggled by the activation of the headlight switch. If on-the-fly rotary type control is desired, the DIM-1 (sold separately) is a common accessory to add this functionality. Themes With 12 factory preset color themes, you can quickly create a beautiful looking system. Or, for the ultimate in customization, choose all of the color zones yourself. Technology Full LED backlighting provides a strikingly visual gauge package, with sharp contrast for ease of viewing both night and day. Full RBG backlighting allows you to create the specific color you want, with a unique daytime and nighttime theme if desired. Whether your goal is an OE look or something truly bold, the HDX Series lets you make the choice. Included Sensors:     Water Temperature - 1/8" NPT, ground isolated sensor with a 10 ft harness. Oil Pressure - 1/8" NPT solid state sensor with a 10 ft harness. Cable Drive Speed Sensor/Generator - Replaces GM style speedometer cables with a 10 ft harness. Sensor requires approximately 5" clearance extending between the cable drive output and any obstruction. Part # 130011 (sold separately) allows for relocation of the pulse generator when additional clearance is required. (Tremec and Ford style adaptors available on request.) Bushings - Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads. Calibration and Use Pushbutton Control All HDX Series Instrument Systems included LED-lit onboard capacitive touch pushbuttons through the gauge face. These pushbuttons provide quick and consistent access to all functions, either in driving mode or while in the setup menu. Button-press feedback is available through the TFT Message Center, or through the included buzzer. Additionally, remote mounted switches can be wired into the HDX system if this proves more accessible based upon seating position. The HDX series can also be completely configured through the Bluetooth app, suitable to Android and Apple devices. Download the free app to your tablet or smart phone, sync your device to the HDX system, and enjoy quick and convenient menu navigation and real time gauge readouts for diagnostic use or a secondary display. Calibration All calibration settings are handled through onboard capacitive touch switches or the remote Bluetooth app. While many calibration settings exist, the speedometer and fuel level are completed in most cases (unless GPS-50-2 is used, negating the need to calibrate the speedometer - GPS-50-2 is available for purchase separately) through a few taps of the pushbuttons and a short test drive of the vehicle.
    • $1325.25
    Backorder available
    • Free shipping
    • 11% less
  • 1954 Chevy Truck VHX System, Silver Alloy Style Face, Red Display - Not Shown
    1954 Chevy Truck VHX System, Silver Alloy Style Face, Red Display - Not Shown
    • $850.25
    • Free shipping
    • 5% less
  • Dakota Digital White Gauge Black Dash for 1957-60 Ford Truck VHX-57F-PU-K-W
    Dakota Digital VHX Instruments Fits: 1957-1960 Ford Truck / 1961-1967 Econoline Van VHX-57F-PU-K-W with BLACK ALLOY Style & White Backlighting 1957 brought us the first fleetside Ford pickup, along with a new dash. The small instrument cluster is just begging for an upgrade, and this direct-fit package is just the ticket! Use your stock 1957- 60 steel front bezel to install this six-gauge-system, complete with sending units in your choice of Black or Silver Alloy face styling. Drivetrain upgrades are not an issue; it’s compatible with everything from a Y-Block to a 4.6 modular motor! Fully lit needles, backlit faces, and two highly visible LCD message centers are a few of the things that you can see which set the VHX Series apart from yesterday’s traditional approach to instrumentation. A few of the features which you don’t normally see are the micro-controlled precision stepper motors, solid state sensors for unparalleled accuracy, and user-customizable display feedback, all supported by an unrivaled limited lifetime warranty which has become the standard for Dakota Digital instrumentation systems . Completely engineered and manufactured at our facility in Sioux Falls, South Dakota, the VHX Series has completely revolutionized the instrumentation industry! *Bezel not included, shown for visual/presentation purposes. System uses OEM or reproduction style bezel VHX System Includes: Analog Gauges Speedometer - 0-160 MPH (optional metric version 0-255 kmh) Tachometer - 0-8000 RPM Oil Pressure - 0-80 psi Water Temperature - 100-260ºF (optional metric version 40-120ºC) Fuel Level - E, 1/4, 1/2, 3/4, F Voltmeter - 9-17 VDC Lighting - Back lit technology is popular with performance instrumentation due to precise lighting allowing you see what is truly important when you really need it at a quick glance. Each number, tick mark, annunciator, needle, indicator and digital message center is lit by a series of LEDs behind the gauge face. Digital Message Center Standard Displays: Odometer (One time user settable, Million Mile) Dual (A/B) Trip Meter (0-9,999.9) Clock (12 hour) Performance Meters:  0-60 MPH Timer (0-100 kmh) 1/4 mile time 1/4 mile end speed (trap speed) High speed recall High RPM recall Gauges:  Speedometer (0-255 MPH / KM/H) Tachometer (0-9,990 RPM) Oil Pressure (0-100 psi displayed in 1 psi increments) Water Temperature (100-300ºF / 40-150ºC displayed in 1ºF/ºC increments) Voltmeter (9-17 VDC) Fuel Level (0-99% full) Lighting: Auto-contrasting LCD display for optimal view in the brightest of sunlight. LED backlit at night to match/complete the look at night. Built-In Indicators Turn Signals (Left/ Right) High Beam Check Engine Parking Brake Cruise Control (On/ On & Engaged when vehicle is equipped) Gear Position (Optional GSS-2000 sensor required, sold separately) 4 x 4 (When vehicle is equipped) Wait to Start (When vehicle is equipped) Included Sensors: Water Temperature - 1/8" NPT, ground isolated sensor with a 10 ft harness. Oil Pressure - 1/8" NPT solid state sensor with a 10 ft harness. Cable Drive Speed Sensor/Generator - Replaces GM style speedometer cables with a 10 ft harness (Tremec and Ford style adapters available upon request). Bushings - Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads. Calibration Pushbutton - Dakota Digital instruments are programmed and operated by the push of a button. Simply mount the included push buttons supplied with your gauges in a convenient and easily accessible location. These buttons are used to calibrate your speedometer, set the cylinder count and the fuel level gauge. Once properly configured these same buttons are used to access the wealth of information located in the Digital Message Centers. More info about this system and pics are available below. This listing is for ONE VHX gauge system with your choice of style and backlighting color. Please let us know your options when you make your purchase. Metric system (KM/H and degrees Celsius) is available as a custom option (no additional cost) but may take 4-8 weeks to build.
    • $850.25
    Backorder available
    • Free shipping
    • 5% less

Browse by Vehicle