5-3/4 Crystal Clear Metal Glass Headlight LED 4000Lm H4 Light Bulb Headlamp Set

THESE ARE CRYSTAL CLEAR GLASS FACED / METAL BACKED HEADLIGHTS!INCLUDES (4) HIGH INTENSITY LED H4 6000K WHITE LIGHT BULBS!SET OF 4 - 5-3/4" CRYSTAL CLEAR HEADLIGHTS W/ LED BULBSCRYSTAL CLEAR GLASS / METAL BACKSIDEHIGH INTENSITY LED BULBS(4) LOW/HIGH BEAM HEADLIGHTSNO MODIFICATIONS NEEDED - PLUG AND PLAYPART NUMBER INTERCHANGE: H5006 / H5001 OR 4000 / 5001DOT SAE APPROVED Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,500 Lumen Bulbs 2,500 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,000 Lumens of light and draws 18 watts of energy on the low beam setting; but produces 2,500 Lumens of light and draws 24 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,000 Lumens Low Beam / 2,500 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle18 Watts Low Beam / 24 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for cooling LED Chips per bulbAll-In-One Design. No Ballast or Driver Required: Newest TechnologyLED Protection Circuit to protect from reverse polarity, low voltage or high voltage spikes. Smart and Efficient Cooling System uses Built-In Cooling Fan. Greater Visibility - 3 times brighter than factory bulbs.High luminous efficacy Flux: 2,500/2,000lm.High quality Aluminum heat sink ensures proper temperature regulation.Lower Power Consumption than bulb.Vibration proof design.30,000 Hour LifespanEasy installation, Plug and Play, No modification requiredNo Splicing of harnesses required for LED bulbsUses 75% less power than or HID bulbs3 times brighter than stock bulbsOBC Error free operationDramatically improves visibility at night THIS LISTING IS FOR A NEW SET OF 5 3/4" CRYSTAL CLEAR GLASS LENS - METAL BACK HEADLIGHT BULBS. THIS SET INCLUDES (4) LOW/HIGH BEAM HEADLIGHTS WITH HIGH INTENSITY LED LIGHT BULBS (NO WIRING OR BUCKET MODIFICATION NEEDED). THESE HAVE THE ORIGINAL SHAPED PRONGS ON THE BACK SO THEY WILL PLUG RIGHT INTO YOUR ORIGINAL WIRING HARNESS PLUGS. THESE WILL FIT ANY CAR OR TRUCK THAT HAS 4 ROUND GLASS HEADLIGHTS. WILL FIT INTO STOCK BUCKETS. EACH BULB IS 5 3/4 INCHES IN DIAMETER. THESE ARE GLASS AND WE WILL TAKE EXTRA CARE IN PACKAGING. DOT SAE APPROVED INTERCHANGE: H5006 / H5001 OR 4000 / 5001

(1)  2 Terminal 12V LED Electrical Flasher New 2-prong (2 terminal with ground wire) 12 Volt LED Flasher. Flasher is designed to replace stock turn signal flasher on most 1955 to present cars and trucks with 2 prong 12v systems. Flasher has NEGATIVE ground (flasher will NOT work with early 6v POSITIVE ground cars/truck or motorcycles). Replacement of the stock flasher is usually needed in order for the LED turn signals to operate as intended. Solves: hyper flashing, burnt out bulb indication, or non flashing when using led lights and led light bulbs. We are also including a FREE "reverse polarity" adapter. If your turn signal flasher dock has the wires reversed, no need to disconnect, switch, and reinstall wires. Simply attach the adapter to the end of the flasher. These flashers will also work with stock turn signals, so if you change back to stock lights, there will be no need to swap out the flasher We also offer 3-prong LED flashers for most pre-1955 vehicles that have been converted to 12v Solve Turn Signal Problems: Hyper Flashing, No Flashing, or Burnt Out Bulb Indication when using LED Lights and LED Bulbs 2 Terminal Flasher / 2 Prong with Ground Wire Use with LED lights Max 20 Amps

OCTANE LIGHTINGBRIGHT RED LED 1157 BULBS! BRAKE TAIL LIGHT / TURN SIGNAL - LED LIGHT BULBS! THIS LISTING IS FOR A PAIR OF NEW #1157 (12 VOLT) LED DOUBLE CONTACT LIGHT BULBS. THESE ARE SUPER BRIGHT 18 LED BULBS AND ARE DIRECT REPLACEMENTS FOR YOUR STOCK 1157 BULBS. THESE HAVE THE ORIGINAL SHAPED TERMINALS ON THE BACK SO THEY WILL PLUG RIGHT INTO YOUR ORIGINAL LIGHT SOCKETS. THESE HAVE DUAL FUNCTION FOR RUNNING / BRAKE / TURN SIGNAL FUNCTIONS. WE WILL TAKE EXTRA CARE IN PACKAGING. Size: 5/8"( D)* 2" (H)